 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
- To: Steuerberater@dorfmueller.de
- Subject: flexfax: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
- From: David Woolley <david@djwhome.demon.co.uk>
- Cc: flexfax@sgi.com
- Reply-To: flexfax@sgi.com
- Date: Mon, 16 Aug 1999 08:00:35 +0100 (BST)
> By sending the file with the modem (Ralley Com 336 Fax-Modem with > Rockwell-Chipsatz) only a few lines are to see on the fax. > Jul 14 12:04:30.18: [ 6659]: USE 9600 bit/s > Jul 14 12:04:36.45: [ 6659]: SEND begin page > Jul 14 12:04:48.45: [ 6659]: SENT 23425 bytes of data > Jul 14 12:04:48.45: [ 6659]: <-- data [2] > Jul 14 12:04:48.46: [ 6659]: SEND end page > Jul 14 12:04:50.53: [ 6659]: --> [1:] > Jul 14 12:04:50.53: [ 6659]: --> [2:OK] 23,425 bytes in 14 seconds is a lot more than 9600 * 1.25; you have no effective flow control.
- Follow-Ups:
- Re: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
- From: Server <Steuerberater@dorfmueller.de>
- Re: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
- References:
- hylafax modem
- From: Server <Steuerberater@dorfmueller.de>
- hylafax modem
- Prev by Date: docq files not getting cleaned up
- Next by Date: Re: FIFO.ttyS0 not connected
- Prev by thread: hylafax modem
- Next by thread: Re: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
- Index(es):
Project hosted by iFAX Solutions