HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: SNPP / PageSend Problem




I get the same errors... in the most current version "Job had no Pin" even
tho I get the page anyway.. in addition, it also thinks it had an error,
because the remote site ack's that it got the message, and then
disconnects.

On Fri, 6 Aug 1999, Mike Jackson wrote:

> 
> Help!
> 
> 	I'm having a problem with hylafax-4.1beta1 running on a Linux
> system.  I am launching hfaxd from inetd and only using the SNPP
> capabilities of hylafax on this machine.  The faxq daemon is running 
> in the background.
> 
> 	The page is sent, queued, transmitted, and received on my pager;
> however, faxq/pagesend thinks that there was some form of error.  The only
> thing that seems to be wrong is that the hylafax system doesn't know that
> the page was accepted and gives a "Job has no PIN to send to" error
> message.
> 
> 	I think that this might be a bug in the 4.1beta1 code in
> pageSendApp.c++; but my C++ isn't as good as my C :)
>  
> 	Here are the transcripts/logs (Actual numbers removed).
> 
> -----------------------------------------------------------------------
> 
> Session with SNPP:
> 
> 220 kes.tscnet.com SNPP server (HylaFAX (tm) Version 4.1beta1) ready. 
> LOGIN user
> 230 User user logged in. 
> SITE JQUEUE yes
> PAGER att555555555
> MESS test message
> 250 Message text OK.
> SEND
> 250 Message succesfully queued. 
> QUIT
> 221 Goodbye.
> 
> ----------------------------------------------------------------------
> My etc/pagermap file has an entry for the TAP provider like this:
> 
> ^att(.*)        18008888888/\1
> 
> -----------------------------------------------------------------------
> 
> Syslog: [Dates/Times removed for readability]
> 
> hfaxd[5389]: connect from httpd@207.227.236.33
> FaxQueuer[30253]: SUBMIT JOB 22
> PageSend[5392]: MODEM  /
> PageSend[5392]: SEND PAGE: JOB 22 DEST 18008418837 COMMID 00000011
> PageSend[5560]: MODEM  /
> PageSend[5560]: PAGE FAILED: Job has no PIN to send to
> FaxQueuer[30253]: NOTIFY: bin/notify "doneq/q22" "failed" "0:05"
> 
> -----------------------------------------------------------------------
> 
> Session Transcript Message (with SessionTracing 0x100f turned on)
> 
> Subject: pager job 22 to 3609085553 failed
> 
> Your pager job to 3609085553 failed because:
>     Job has no PIN to send to
> 
>     ---- Transcript of session follows ----
> 
> Aug 06 14:59:50.33: [ 5392]: SESSION BEGIN 00000011 18008418837
> Aug 06 14:59:50.34: [ 5392]: SEND PAGE: JOB 22 DEST 18008418837 COMMID
> 00000011
> Aug 06 14:59:50.34: [ 5392]: MODEM set DTR OFF
> Aug 06 14:59:50.34: [ 5392]: DELAY 2600 ms
> Aug 06 14:59:52.94: [ 5392]: MODEM set DTR ON
> Aug 06 14:59:52.94: [ 5392]: MODEM set baud rate: 38400 baud, input flow
> RTS/CTS
> , output flow RTS/CTS
> Aug 06 14:59:52.94: [ 5392]: MODEM flush i/o
> Aug 06 14:59:52.94: [ 5392]: <-- [15:ATE0V1Q0S0=0H0\r]
> Aug 06 14:59:53.73: [ 5392]: --> [2:OK]
> Aug 06 14:59:53.73: [ 5392]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> Aug 06 14:59:53.90: [ 5392]: --> [2:OK]
> Aug 06 14:59:53.90: [ 5392]: <-- [5:ATM0\r]
> Aug 06 14:59:54.05: [ 5392]: --> [2:OK]
> Aug 06 14:59:54.05: [ 5392]: MODEM set parity: 7 bits, even parity
> Aug 06 14:59:54.05: [ 5392]: MODEM input buffering enabled
> Aug 06 14:59:54.05: [ 5392]: <-- [12:AT+FCLASS=0\r]
> Aug 06 14:59:54.31: [ 5392]: --> [2:OK]
> Aug 06 14:59:54.31: [ 5392]: DIAL 18008888888
> Aug 06 14:59:54.31: [ 5392]: <-- [16:ATDT18008888888\r]
> Aug 06 15:00:13.75: [ 5392]: --> [13:CONNECT 14400]
> Aug 06 15:00:13.75: [ 5392]: EXPECT ID (paging central identification)
> Aug 06 15:00:13.75: [ 5392]: <-- <1:\015>
> Aug 06 15:00:15.75: [ 5392]: MODEM TIMEOUT: reading line from modem
> Aug 06 15:00:15.75: [ 5392]: --> <3:ID=>
> Aug 06 15:00:15.75: [ 5392]: RECV ID ("ID=")
> Aug 06 15:00:15.75: [ 5392]: SEND device identification/login request
> Aug 06 15:00:15.75: [ 5392]: <-- <5:\033PG1\015>
> Aug 06 15:00:16.71: [ 5392]: --> <3:110>
> Aug 06 15:00:16.71: [ 5392]: RECV: 110
> Aug 06 15:00:16.71: [ 5392]: --> <1:\006>
> Aug 06 15:00:16.71: [ 5392]: RECV ACK (login successful)
> Aug 06 15:00:16.71: [ 5392]: --> <3:\033[p>
> Aug 06 15:00:16.71: [ 5392]: RECV go-ahead (prologue done)
> Aug 06 15:00:16.71: [ 5392]: SEND message block
> Aug 06 15:00:16.71: [ 5392]: <-- <38:\0025555555555\015test message\015\
> 0039>;\015>
> Aug 06 15:00:17.63: [ 5392]: --> <1:\006>
> Aug 06 15:00:17.63: [ 5392]: RECV ACK (message block accepted)
> Aug 06 15:00:17.63: [ 5392]: <-- <2:\004\015>
> Aug 06 15:00:19.48: [ 5392]: --> <10:NO CARRIER>
> Aug 06 15:00:19.48: [ 5392]: RECV: NO CARRIER
> Aug 06 15:00:49.48: [ 5392]: MODEM TIMEOUT: reading line from modem
> Aug 06 15:00:49.48: [ 5392]: <-- [5:ATH0\r]
> Aug 06 15:00:50.36: [ 5392]: --> [2:OK]
> Aug 06 15:00:50.36: [ 5392]: MODEM input buffering enabled
> Aug 06 15:00:50.36: [ 5392]: MODEM set DTR OFF
> Aug 06 15:00:50.36: [ 5392]: SESSION END
> 
>     ---- Unsent job status ----
> 
>    Destination: 5555555555
>          JobID: 22
>        GroupID: 22
>         Sender: user
>       Mailaddr: user@host.domain.com
>         CommID: 00000011
> Submitted From: host.domain.com
>         Status: Job has no PIN to send to
>        Dialogs: 1 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 1 (total phone calls placed)
> 
>     ---- Message text ----
> 
> test message
> 
> ------------------------------------------------------------------------
> 
> Any help with this would be appreciated.
> 
> 					Mike Jackson
> 					TSCNet
> 


Erik Parker
eparker@mindsec.com




Project hosted by iFAX Solutions