 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
ZyXEL-2864 and RTN problem
- To: flexfax@sgi.com
- Subject: flexfax: ZyXEL-2864 and RTN problem
- From: Gardar Georg Nielsen <goggi@rsp.is>
- Date: Mon, 28 Jun 1999 16:00:20 +0000
I have HylaFAX Version 4.0pl2 on Linux Redhat 6.0 and ZyXEL 2864 with 3.0 firmware. When I send a fax to some faxmachines I get the this "retrain negative" error and get 3 copies of the page on the faxmachine but HylaFAX thinks that it was not able to send the fax. See following session log. Anyone know what could be the problem and how to solve it ? Best, Gardar Nielsen, goggi@rsp.is ------------------------------------ Jun 28 13:53:23.46: [ 644]: SESSION BEGIN 00000017 3542299 Jun 28 13:53:23.46: [ 644]: SEND FAX: JOB 16 DEST 2299 COMMID 00000017 Jun 28 13:53:23.46: [ 644]: DELAY 2600 ms Jun 28 13:53:26.06: [ 644]: <-- [36:AT&B1&N0&S0S18=4S38.3=1E0V1Q0S0=0H0\r] Jun 28 13:53:26.23: [ 644]: --> [2:OK] Jun 28 13:53:26.23: [ 644]: <-- [21:ATS8=2S7=60&H3&D2&C1\r] Jun 28 13:53:26.25: [ 644]: --> [2:OK] Jun 28 13:53:26.25: [ 644]: <-- [14:AT+FCLASS=2.0\r] Jun 28 13:53:26.26: [ 644]: --> [2:OK] Jun 28 13:53:26.26: [ 644]: <-- [9:AT+FLO=2\r] Jun 28 13:53:26.27: [ 644]: --> [2:OK] Jun 28 13:53:26.27: [ 644]: <-- [9:AT+FPP=0\r] Jun 28 13:53:26.28: [ 644]: --> [2:OK] Jun 28 13:53:26.28: [ 644]: <-- [9:AT+FBO=0\r] Jun 28 13:53:26.29: [ 644]: --> [2:OK] Jun 28 13:53:26.29: [ 644]: <-- [10:AT+FCT=30\r] Jun 28 13:53:26.30: [ 644]: --> [2:OK] Jun 28 13:53:26.30: [ 644]: <-- [15:AT+FNR=1,1,1,1\r] Jun 28 13:53:26.31: [ 644]: --> [2:OK] Jun 28 13:53:26.31: [ 644]: <-- [9:AT+FIE=0\r] Jun 28 13:53:26.32: [ 644]: --> [2:OK] Jun 28 13:53:26.32: [ 644]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r] Jun 28 13:53:26.34: [ 644]: --> [2:OK] Jun 28 13:53:26.34: [ 644]: <-- [5:ATM0\r] Jun 28 13:53:26.35: [ 644]: --> [2:OK] Jun 28 13:53:26.35: [ 644]: <-- [14:AT+FCLASS=2.0\r] Jun 28 13:53:26.46: [ 644]: --> [2:OK] Jun 28 13:53:26.46: [ 644]: <-- [9:AT+FLO=2\r] Jun 28 13:53:26.57: [ 644]: --> [2:OK] Jun 28 13:53:26.57: [ 644]: <-- [9:AT+FPP=0\r] Jun 28 13:53:26.68: [ 644]: --> [2:OK] Jun 28 13:53:26.68: [ 644]: <-- [9:AT+FBO=0\r] Jun 28 13:53:26.79: [ 644]: --> [2:OK] Jun 28 13:53:26.79: [ 644]: <-- [10:AT+FCT=30\r] Jun 28 13:53:26.90: [ 644]: --> [2:OK] Jun 28 13:53:26.90: [ 644]: <-- [15:AT+FNR=1,1,1,1\r] Jun 28 13:53:27.01: [ 644]: --> [2:OK] Jun 28 13:53:27.01: [ 644]: <-- [9:AT+FIE=0\r] Jun 28 13:53:27.12: [ 644]: --> [2:OK] Jun 28 13:53:27.12: [ 644]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r] Jun 28 13:53:27.24: [ 644]: --> [2:OK] Jun 28 13:53:27.24: [ 644]: <-- [13:AT+FLI="RSP"\r] Jun 28 13:53:27.35: [ 644]: --> [2:OK] Jun 28 13:53:27.35: [ 644]: DIAL 2299 Jun 28 13:53:27.35: [ 644]: <-- [9:ATDT2299\r] Jun 28 13:53:45.73: [ 644]: --> [4:+FCO] Jun 28 13:53:45.86: [ 644]: --> [142:+FNF:"00 00 51 00 00 04 91 4A 92 D2 92 CA CA 0A 92 2A 82 32 82 4A 04 04 04 04 04 04 04 04 04 04 04 FF FF FF FF FF FF FF FF 41 4E FF FF 00 00 ] Jun 28 13:53:45.86: [ 644]: REMOTE NSF ""00 00 51 00 00 04 91 4A 92 D2 92 CA CA 0A 92 2A 82 32 82 4A 04 04 04 04 04 04 04 04 04 04 04 FF FF FF FF FF FF FF FF 41 4E FF FF 00 00" Jun 28 13:53:45.86: [ 644]: --> [28:+FCI:" " ] Jun 28 13:53:45.86: [ 644]: REMOTE CSI "" Jun 28 13:53:45.86: [ 644]: --> [20:+FIS:1,3,0,2,1,1,0,3] Jun 28 13:53:45.86: [ 644]: --> [2:OK] Jun 28 13:53:45.86: [ 644]: REMOTE best rate 9600 bit/s Jun 28 13:53:45.86: [ 644]: REMOTE max page width 1728 pixels in 215 mm Jun 28 13:53:45.86: [ 644]: REMOTE max unlimited page length Jun 28 13:53:45.86: [ 644]: REMOTE best vres 7.7 line/mm Jun 28 13:53:45.86: [ 644]: REMOTE best format 2-D MR Jun 28 13:53:45.86: [ 644]: REMOTE supports T.30 Annex A, ECM Jun 28 13:53:45.86: [ 644]: REMOTE best 10 ms/scanline Jun 28 13:53:45.86: [ 644]: USE 9600 bit/s Jun 28 13:53:45.86: [ 644]: USE 10 ms/scanline Jun 28 13:53:45.86: [ 644]: SEND file "docq/doc17.ps;00" Jun 28 13:53:45.86: [ 644]: USE page width 1728 pixels in 215 mm Jun 28 13:53:45.86: [ 644]: USE unlimited page length Jun 28 13:53:45.86: [ 644]: USE 3.85 line/mm Jun 28 13:53:45.86: [ 644]: USE 1-D MR Jun 28 13:53:45.86: [ 644]: <-- [23:AT+FIS=0,3,0,2,0,0,0,3\r] Jun 28 13:53:45.98: [ 644]: --> [2:OK] Jun 28 13:53:45.98: [ 644]: <-- [7:AT+FDT\r] Jun 28 13:53:52.24: [ 644]: --> [20:+FCS:0,3,0,2,0,0,0,3] Jun 28 13:53:52.80: [ 644]: --> [7:CONNECT] Jun 28 13:53:52.80: [ 644]: SEND begin page Jun 28 13:53:52.80: [ 644]: <-- data [1028] Jun 28 13:53:52.80: [ 644]: <-- data [743] Jun 28 13:53:52.80: [ 644]: SENT 1764 bytes of data Jun 28 13:53:52.80: [ 644]: SEND 1D RTC Jun 28 13:53:52.80: [ 644]: <-- data [9] Jun 28 13:53:52.80: [ 644]: SEND end page Jun 28 13:53:52.80: [ 644]: SEND send EOP (no more pages or documents) Jun 28 13:53:52.80: [ 644]: <-- data [2] Jun 28 13:53:58.16: [ 644]: --> [5:ERROR] Jun 28 13:53:58.16: [ 644]: SEND recv RTN (retrain negative) Jun 28 13:53:58.16: [ 644]: <-- [23:AT+FIS=0,2,0,2,0,0,0,3\r] Jun 28 13:53:58.28: [ 644]: --> [2:OK] Jun 28 13:53:58.28: [ 644]: <-- [7:AT+FDT\r] Jun 28 13:54:04.54: [ 644]: --> [20:+FCS:0,2,0,2,0,0,0,3] Jun 28 13:54:05.09: [ 644]: --> [7:CONNECT] Jun 28 13:54:05.09: [ 644]: SEND begin page Jun 28 13:54:05.09: [ 644]: <-- data [1028] Jun 28 13:54:05.09: [ 644]: <-- data [743] Jun 28 13:54:05.09: [ 644]: SENT 1764 bytes of data Jun 28 13:54:05.09: [ 644]: SEND 1D RTC Jun 28 13:54:05.09: [ 644]: <-- data [9] Jun 28 13:54:05.09: [ 644]: SEND end page Jun 28 13:54:05.09: [ 644]: SEND send EOP (no more pages or documents) Jun 28 13:54:05.09: [ 644]: <-- data [2] Jun 28 13:54:10.85: [ 644]: --> [5:ERROR] Jun 28 13:54:10.85: [ 644]: SEND recv RTN (retrain negative) Jun 28 13:54:10.85: [ 644]: <-- [23:AT+FIS=0,1,0,2,0,0,0,3\r] Jun 28 13:54:10.97: [ 644]: --> [2:OK] Jun 28 13:54:10.97: [ 644]: <-- [7:AT+FDT\r] Jun 28 13:54:17.72: [ 644]: --> [20:+FCS:0,1,0,2,0,0,0,3] Jun 28 13:54:18.75: [ 644]: --> [7:CONNECT] Jun 28 13:54:18.75: [ 644]: SEND begin page Jun 28 13:54:18.75: [ 644]: <-- data [1028] Jun 28 13:54:18.75: [ 644]: <-- data [743] Jun 28 13:54:18.75: [ 644]: SENT 1764 bytes of data Jun 28 13:54:18.75: [ 644]: SEND 1D RTC Jun 28 13:54:18.75: [ 644]: <-- data [9] Jun 28 13:54:18.75: [ 644]: SEND end page Jun 28 13:54:18.75: [ 644]: SEND send EOP (no more pages or documents) Jun 28 13:54:18.75: [ 644]: <-- data [2] Jun 28 13:54:25.31: [ 644]: --> [5:ERROR] Jun 28 13:54:25.31: [ 644]: SEND recv RTN (retrain negative) Jun 28 13:54:25.31: [ 644]: <-- [7:AT+FKS\r] Jun 28 13:54:26.78: [ 644]: --> [7:+FHS:02] Jun 28 13:54:26.78: [ 644]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2) Jun 28 13:54:26.78: [ 644]: --> [5:ERROR] Jun 28 13:54:26.78: [ 644]: MODEM Command error Jun 28 13:54:26.78: [ 644]: <-- [5:ATH0\r] Jun 28 13:54:27.37: [ 644]: --> [10:NO CARRIER] Jun 28 13:54:27.37: [ 644]: MODEM No carrier Jun 28 13:54:27.37: [ 644]: SESSION END
- Follow-Ups:
- Re: ZyXEL-2864 and RTN problem
- From: David Woolley <david@djwhome.demon.co.uk>
- Re: ZyXEL-2864 and RTN problem
- Prev by Date: Re: massive WHFC deployment
- Next by Date: Re: ELSA MikroLink[tm] Office or US-Robotics & Hylafax
- Prev by thread: Can't get Microcom DeskPorte Fast+ to work
- Next by thread: Re: ZyXEL-2864 and RTN problem
- Index(es):
Project hosted by iFAX Solutions