Re: flexfax: transmit error

[Pedram Samghabadi <pedrams@sgc.com>]

> Using a Sporster.
I tried using a Multi-Tech MT224BA, but that also failed.

> Failing to include the session log in the report.
Here is the session log using the Multi-Tech:

Jun 16 09:31:09.50: [20259]: SESSION BEGIN 00000277 12123554271
Jun 16 09:31:09.51: [20259]: SEND FAX: JOB 106 DEST 355.4271 COMMID
00000277
Jun 16 09:31:09.51: [20259]: DELAY 2600 ms
Jun 16 09:31:12.11: [20259]: <-- [15:ATE0V1Q0S0=0H0\r]
Jun 16 09:31:12.35: [20259]: --> [2:OK]
Jun 16 09:31:12.35: [20259]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Jun 16 09:31:12.59: [20259]: --> [2:OK]
Jun 16 09:31:12.59: [20259]: <-- [12:AT+FCLASS=2\r]
Jun 16 09:31:12.82: [20259]: --> [2:OK]
Jun 16 09:31:12.82: [20259]: <-- [10:AT+FTBC=0\r]
Jun 16 09:31:13.05: [20259]: --> [2:OK]
Jun 16 09:31:13.05: [20259]: <-- [10:AT+FBOR=0\r]
Jun 16 09:31:13.28: [20259]: --> [2:OK]
Jun 16 09:31:13.28: [20259]: <-- [13:AT+FPHCTO=30\r]
Jun 16 09:31:13.51: [20259]: --> [2:OK]
Jun 16 09:31:13.51: [20259]: <-- [24:AT+FDCC=1,3,2,2,0,0,0,0\r]
Jun 16 09:31:13.75: [20259]: --> [2:OK]
Jun 16 09:31:13.75: [20259]: <-- [5:ATM0\r]
Jun 16 09:31:13.98: [20259]: --> [2:OK]
Jun 16 09:31:14.00: [20259]: <-- [12:AT+FCLASS=2\r]
Jun 16 09:31:14.34: [20259]: --> [2:OK]
Jun 16 09:31:14.34: [20259]: <-- [10:AT+FTBC=0\r]
Jun 16 09:31:14.67: [20259]: --> [2:OK]
Jun 16 09:31:14.67: [20259]: <-- [10:AT+FBOR=0\r]
Jun 16 09:31:15.00: [20259]: --> [2:OK]
Jun 16 09:31:15.00: [20259]: <-- [13:AT+FPHCTO=30\r]
Jun 16 09:31:15.33: [20259]: --> [2:OK]
Jun 16 09:31:15.33: [20259]: <-- [24:AT+FDCC=1,3,2,2,0,0,0,0\r]
Jun 16 09:31:15.67: [20259]: --> [2:OK]
Jun 16 09:31:15.67: [20259]: <-- [23:AT+FLID="NothingSetup"\r]
Jun 16 09:31:16.01: [20259]: --> [2:OK]
Jun 16 09:31:16.02: [20259]: DIAL 3554271
Jun 16 09:31:16.02: [20259]: <-- [13:ATDT3554271@\r]
Jun 16 09:31:35.18: [20259]: --> [5:+FCON]
Jun 16 09:31:37.95: [20259]: --> [105:+FNSF:00 00 11 80 00 8A 49 10 53
41 4B 55 52 41 20 47 4C 4F 42 41 4C 20 20 20 00 53 00 80 80 80 0C 01 02
]
Jun 16 09:31:37.95: [20259]: REMOTE NSF "00 00 11 80 00 8A 49 10 53 41
4B 55 52 41 20 47 4C 4F 42 41 4C 20 20 20 00 53 00 80 80 80 0C 01 02"
Jun 16 09:31:38.07: [20259]: --> [28:+FCSI:"        212 355 4271"]
Jun 16 09:31:38.07: [20259]: REMOTE CSI "212 355 4271"
Jun 16 09:31:38.07: [20259]: --> [6:+FDIS:]
Jun 16 09:31:38.07: [20259]: MODEM protocol botch, can not parse ""
Jun 16 09:31:38.07: [20259]: --> [2:OK]
Jun 16 09:31:38.07: [20259]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Jun 16 09:31:38.07: [20259]: SEND FAILED: Unspecified Transmit Phase B
error
Jun 16 09:31:38.08: [20259]: SEND FAILED: Unspecified Transmit Phase B
error; too many attempts to send
Jun 16 09:31:38.08: [20259]: <-- [5:ATH0\r]
Jun 16 09:31:39.85: [20259]: --> [7:+FHNG:2]
Jun 16 09:31:39.85: [20259]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Jun 16 09:31:40.48: [20259]: --> [2:OK]
Jun 16 09:31:40.48: [20259]: SESSION END

-- 
Pedram