flexfax: COMREC received DCN

[Daryl Sayers <daryl@ci.com.au>]

I have a problem with my inbound only hylafax-v4.0pl2-1 setup on a Linux
Redhat 5.2 system. I have a Banksia modem configured as a Class 1 and I
receive about 30 faxes a day. I get about 2-3 faxes that fail to be
received. All of these failures are due to a "COMREC received DCN"
Any ideas on what the problem is.

Here is a section of the transmission log:

Jun 08 00:00:07.88: [  343]: RECV recv MPS (more pages, same document)
Jun 08 00:00:07.88: [  343]: <-- [9:AT+FTH=3\r]
Jun 08 00:00:07.93: [  343]: --> [7:CONNECT]
Jun 08 00:00:07.93: [  343]: <-- data [3]
Jun 08 00:00:07.93: [  343]: <-- data [2]
Jun 08 00:00:09.24: [  343]: --> [2:OK]
Jun 08 00:00:09.24: [  343]: RECV send MCF (message confirmation)
Jun 08 00:00:09.24: [  343]: <-- [10:AT+FRM=96\r]
Jun 08 00:00:11.71: [  343]: --> [8:+FCERROR]
Jun 08 00:00:11.71: [  343]: <-- [9:AT+FRH=3\r]
Jun 08 00:00:12.06: [  343]: --> [7:CONNECT]
Jun 08 00:00:12.58: [  343]: --> [2:OK]
Jun 08 00:00:12.58: [  343]: RECV recv DCN
Jun 08 00:00:12.58: [  343]: RECV FAX (00000895): recvq/fax00806.tif from , route to <unspecified>, 1 pages in 0:44
Jun 08 00:00:12.58: [  343]: RECV FAX: COMREC received DCN
Jun 08 00:00:12.58: [  343]: <-- [9:AT+FTH=3\r]
Jun 08 00:00:12.62: [  343]: --> [7:CONNECT]
Jun 08 00:00:12.62: [  343]: <-- data [3]
Jun 08 00:00:12.62: [  343]: <-- data [2]
Jun 08 00:00:13.94: [  343]: --> [2:OK]
Jun 08 00:00:13.94: [  343]: RECV FAX (00000895): session with  terminated abnormally: COMREC received DCN
Jun 08 00:00:13.94: [  343]: RECV FAX: bin/faxrcvd "recvq/fax00806.tif" "ttyS1" "00000895" "COMREC received DCN"
Jun 08 00:00:14.14: [  343]: RECV FAX: end
Jun 08 00:00:14.15: [  343]: SESSION END


-- 
Daryl Sayers
Corinthian Engineering                         Ph: (02) 9906 4333
Suite 19, 401 Pacific Hwy                     Fax: (02) 9906 1556
Artarmon, NSW, 2064                         email: daryl@ci.com.au
Australia                                     www: http://www.cordoors.com.au