HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Everything works apart from ........



Hi, I hope you all can help me because this is driving me nuts....

I am running version 4.0p12 on redhat 5.2, using a MRI internal faxmodem.

I can send without problems and it appears to be receiving properly ( as 
far as I can tell ). but when I view the received faxes some are fine 
others are like this one...

I have looked all through the mailing list archives, but I couldn't find a 
similar problem.

I am sorry to have to trouble you will all this but
THIS IS THE LAST RESORT, I have tried everything I can think of.
including adding this entry into my config.cua0 file

Class2DDISCmd:	AT+FDIS

Thanks in advance...
Anthony Baxter
Anthony@prodigy-solutions.com
tonyb_1@hotmail.com


Jun 03 14:34:03.70: [  385]: SESSION BEGIN 00000037 01286685301
Jun 03 14:34:03.70: [  385]: <-- [4:ATA\r]
Jun 03 14:34:05.62: [  385]: --> [3:FAX]
Jun 03 14:34:05.62: [  385]: ANSWER: FAX CONNECTION
Jun 03 14:34:05.62: [  385]: RECV FAX: begin
Jun 03 14:34:12.20: [  385]: --> [5:+FCON]
Jun 03 14:34:13.85: [  385]: --> [29:+FTSI: "01614805428         "]
Jun 03 14:34:13.85: [  385]: REMOTE TSI "01614805428"
Jun 03 14:34:14.33: [  385]: --> [22:+FDCS: 0,5,0,2,0,0,0,3]
Jun 03 14:34:14.33: [  385]: REMOTE wants 14400 bit/s
Jun 03 14:34:14.33: [  385]: REMOTE wants page width 1728 pixels in 215 mm
Jun 03 14:34:14.33: [  385]: REMOTE wants unlimited page length
Jun 03 14:34:14.33: [  385]: REMOTE wants 3.85 line/mm
Jun 03 14:34:14.33: [  385]: REMOTE wants 1-D MR
Jun 03 14:34:14.33: [  385]: --> [2:OK]
Jun 03 14:34:14.33: [  385]: <-- [7:AT+FDR\r]
Jun 03 14:34:17.11: [  385]: --> [5:+FCFR]
Jun 03 14:34:19.29: [  385]: --> [22:+FDCS: 0,5,0,2,0,0,0,3]
Jun 03 14:34:19.29: [  385]: REMOTE wants 14400 bit/s
Jun 03 14:34:19.29: [  385]: REMOTE wants page width 1728 pixels in 215 mm
Jun 03 14:34:19.29: [  385]: REMOTE wants unlimited page length
Jun 03 14:34:19.29: [  385]: REMOTE wants 3.85 line/mm
Jun 03 14:34:19.29: [  385]: REMOTE wants 1-D MR
Jun 03 14:34:19.29: [  385]: --> [7:CONNECT]
Jun 03 14:34:19.29: [  385]: RECV: begin page
Jun 03 14:34:19.29: [  385]: RECV: send trigger 021
Jun 03 14:34:19.29: [  385]: <-- data [1]
Jun 03 14:34:43.50: [  385]: RECV: 366 total lines, 0 bad lines, 0 
consecutive bad lines
Jun 03 14:34:43.51: [  385]: --> [17:+FPTS: 1,2219,0,0]
Jun 03 14:34:48.12: [  385]: --> [7:+FET: 2]
Jun 03 14:34:48.12: [  385]: RECV recv EOP (no more pages or documents)
Jun 03 14:34:48.12: [  385]: --> [2:OK]
Jun 03 14:34:48.12: [  385]: RECV send MCF (message confirmation)
Jun 03 14:34:48.12: [  385]: RECV FAX (00000037): from 01614805428, page 1 
in 0:34, INF, 3.85 line/mm, 1-D MR
Jun 03 14:34:48.12: [  385]: RECV FAX (00000037): recvq/fax00024.tif from 
01614805428, route to <unspecified>, 1 pages in 0:43
Jun 03 14:34:48.12: [  385]: <-- [7:AT+FDR\r]
Jun 03 14:34:50.99: [  385]: --> [8:+FHNG: 0]
Jun 03 14:34:50.99: [  385]: REMOTE HANGUP: Normal and proper end of 
connection (code 0)
Jun 03 14:34:50.99: [  385]: RECV FAX: bin/faxrcvd "recvq/fax00024.tif" 
"cua0" "00000037" ""
Jun 03 14:34:51.87: [  385]: RECV FAX: end
Jun 03 14:34:51.87: [  385]: SESSION END

fax00024.tif




Project hosted by iFAX Solutions