HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: modem on a terminal server



I can't remember where I got it from, but the product termpkg should be a
start.. Try a search at AltaVista.

I tried to use it some time ago with intermittent results. I'd suggest you
get HylaFax working properly ( with directly connected modem ) without using
termpkg first..

Next I'd also suggest not using faxgetty ( there goes incoming calls ).
Faxgetty had a lot of problems locking the port when termpkg was running.. 

Please let me know how it goes.. The solution I have in lieu of termpkg
isn't what I wanted but I didn't have the time to spend on termpkg.

Cheers

Tim

		-----Original Message-----
		From:	Robert Shectman [mailto:shectman@llnl.gov]
		Sent:	Wednesday, 2 June 1999 10:37
		To:	flexfax@sgi.com
		Subject:	flexfax: modem on a terminal server

		Is there any way to use HylaFax with a modem on a
		terminal server (access via a internet address and port
number)?


		--
		Robert M. Shectman
		Atmospheric Release Advisory Capability
		Lawrence Livermore National Laboratory
		PO Box 808   MS L-103
		Livermore CA,  94550

		shectman@llnl.gov
		(925)423-6714
		(925)423-8274 (fax)



		This message has successfully passed virus checking.
Mazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.




Project hosted by iFAX Solutions