flexfax: Help!!

[Adam Days <adam@myhome.net>]

Hello,
I've gotten the proper configuration now, but now I'm having problems
getting it to send a message block.  The pager in this instance is a
numeric-only pager and I'm using the command:
sendpage -n -p <pin>
the server comes back wiht a no carrier error...
the logs look as follows:
May 20 10:18:28.21: [11214]: SESSION BEGIN 00000042 13607409040
May 20 10:18:28.21: [11214]: SEND PAGE: JOB 33 DEST 7409040 COMMID 00000042
May 20 10:18:28.21: [11214]: DELAY 2600 ms
May 20 10:18:30.82: [11214]: <-- [17:ATE0V1Q0X4S0=0H0\r]
May 20 10:18:30.99: [11214]: --> [16:ATE0V1Q0X4S0=0H0]
May 20 10:18:30.99: [11214]: --> [2:OK]
May 20 10:18:30.99: [11214]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
May 20 10:18:31.16: [11214]: --> [2:OK]
May 20 10:18:31.16: [11214]: <-- [5:ATM1\r]
May 20 10:18:31.33: [11214]: --> [2:OK]
May 20 10:18:31.33: [11214]: <-- [12:AT+FCLASS=0\r]
May 20 10:18:31.48: [11214]: --> [2:OK]
May 20 10:18:31.48: [11214]: DIAL 7409040
May 20 10:18:31.48: [11214]: <-- [12:ATDT7409040\r]
May 20 10:18:50.90: [11214]: --> [12:CONNECT 1200]
May 20 10:18:50.90: [11214]: EXPECT ID (paging central identification)
May 20 10:18:51.62: [11214]: RECV ID ("ID=")
May 20 10:18:51.62: [11214]: SEND device identification/login request
May 20 10:18:52.15: [11214]: RECV ACK (login successful)
May 20 10:18:52.15: [11214]: RECV: Processing - Please Wait
May 20 10:18:52.15: [11214]: RECV go-ahead (prologue done)
May 20 10:18:52.15: [11214]: SEND message block
May 20 10:18:52.61: [11214]: RECV RS (message block rejected; skip to next)
May 20 10:18:52.61: [11214]: <-- [5:ATH0\r]
May 20 10:18:54.83: [11214]: --> [26:\^Uh:^\3x)MIU^L^L4^Q&vCtte^Y^DN^[]
May 20 10:18:55.68: [11214]: --> [6:^]VmR10]
May 20 10:18:55.68: [11214]: --> [10:NO CARRIER]
May 20 10:18:55.68: [11214]: MODEM No carrier
May 20 10:18:55.68: [11214]: SESSION END
~
Does anyone have any ideas?

thanks
-Adam