![]() |
I would appreciate any help anyone could give me with the problem described below. I know it is a long description, but I wanted to make sure that you have enough to figure what I have messed up. I have read the FAQ, the HTML documentation and the Mailing List archives back to September 98, but I am stumped. Please let me know if I left something off I need to explain better. ******************* Problem: ******************* Trying to install Hylafax server to send out faxes, but I receive a "segment fault: core dump" when running any of the server scripts such as "faxq". I also could not find a description of the files in the RPM directory from where I was downloading and installed multiple versions of Hylafax as is noted below. ******************* System: ******************* Dual PentiumII Celeron 128meg RAM RH6.0 Hayes Accura 144 + FAX 144 ******************* What I have tried: ******************* I downloaded everything in the RPM directory from the FTP site. The files I downloaded are: ghostscript-5.10-6-patch-980714-1.noarch.rpm ghostscript-5.10-6.noarch.rpm ghostscript-fonts-std-5.10-7.noarch.rpm ghostscript-manuel-e-5.01-1.noarch.rpm hylafax-4.0pl1-2.i386.rpm hylafax-4.0pl2-3rh4.i386.rpm hylafax-4.0pl2-3rh5.i386.rpm libjpeg-6b-9.i386.rpm libjpeg.rpm libjpeg6a-6a-4.i386.rpm libtiff-3.4-6.i386.rpm I tried to install "hylafax-4.0pl2-3rh4.i386.rpm", but it said it need the ghostscript library. I tried installing all the ghostscript rpms, but I was told with the exception of the "fonts-other" , that I already had them. I went ahead and installed "ghostscript-5.10-6.i386.rpm" anyway. I tried to install "hylafax-4.0pl2-3rh4.i386.rpm" again, but it said it need both the tiff library and the libjpeg library. I then installed the "libtiff-3.4-6.i386.rpm" with no problem. I tried to install "libjpeg-6b-9.i386.rpm" but I was told it already existed. I tried again to install "hylafax-4.0pl2-3rh4.i386.rpm" but it still needed the libjpeg library. I installed "libjpeg.rpm", but it did not help. I installed "libjpeg6a-6a-4.i386.rpm and then I was able to install "hylafax-4.0pl2-3rh5.i386.rpm". I then installed "hylafax-4.0pl2-3rh4.i386" even though it still insisted that I needed the libjpeg library. I ran "cu -l modem", and connected to my modem and confirmed that is was a Class 1 device. I ran "faxsetup". I ran "faxsetup -with-" to point to a file that I can not longer remember. It then told me that it could not find "egetty", "vgetty", "marwk". After searching redhats site, I made a symlink from getty to both vgetty and egetty. I also made a symlink from garwk to marwk. I ran faxsetup and configured everything with no problem. However, hylafax is not running. If I try to start it, I get segment faults. I know I probably messed it up by installing too much. Can anyone tell me what to do? Can I just scrap everything and start again? Greg I downloaded "hylafax-4.0pl2-3rh5.src.rpm" and executed "tpm --rebuild hylafax-4.0pl2-3rh5.src.rpm". After about 2 minutes of compiling, It completed with this error: "Bad exit status from /var/tmp/rpm-tmp.30820 (%build)"