 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Only first page sent, but 3 times
- To: <flexfax@sgi.com>
- Subject: flexfax: Only first page sent, but 3 times
- From: "Horst Simon" <hsimon@vic.bigpond.net.au>
- Reply-To: <hsimon@vic.bigpond.net.au>
- Date: Tue, 23 Mar 1999 12:19:24 +1100
I have HylaFAX v4.0pl2 binary distribution on RedHat 5.2 and using a Hayes Optima 336. I tested outgoing and incoming faxes and all worked ok, all this test were carried out to othe faxmodems or faxboards. I sent a fax to a fax machine for the first time and the transmission failed, it transmitted only the first page and 3 times. I looked at the log file and can see there is a difference betweeen the good transmission and the failed, but unfortunately I do not understand what all this means and how to correct it. Following is the trace and any information/suggestions is aoppreciated. Thanks and Regards, Horst Simon =============================== | Horst Simon | | 9 Stonehaven Crescent | | Moorabbin, Vic, 3189 | | Australia | | hsimon@vic.bigpond.net.au | =============================== Mar 23 11:00:26.74: [ 1127]: SESSION BEGIN 00000006 6103149900113284316504 Mar 23 11:00:26.75: [ 1127]: SEND FAX: JOB 4 DEST 1499 0011 32 84 316504 COMMID 00000006 Mar 23 11:00:26.75: [ 1127]: DELAY 2600 ms Mar 23 11:00:29.35: [ 1127]: <-- [15:ATE0V1Q0S0=0H0\r] Mar 23 11:00:29.40: [ 1127]: --> [2:OK] Mar 23 11:00:29.40: [ 1127]: <-- [12:ATS8=2S7=60\r] Mar 23 11:00:29.46: [ 1127]: --> [2:OK] Mar 23 11:00:29.46: [ 1127]: <-- [12:AT+FCLASS=2\r] Mar 23 11:00:29.50: [ 1127]: --> [2:OK] Mar 23 11:00:29.50: [ 1127]: <-- [10:AT+FTBC=0\r] Mar 23 11:00:29.55: [ 1127]: --> [2:OK] Mar 23 11:00:29.55: [ 1127]: <-- [10:AT+FBOR=0\r] Mar 23 11:00:29.60: [ 1127]: --> [2:OK] Mar 23 11:00:29.60: [ 1127]: <-- [13:AT+FPHCTO=30\r] Mar 23 11:00:29.65: [ 1127]: --> [2:OK] Mar 23 11:00:29.65: [ 1127]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r] Mar 23 11:00:29.70: [ 1127]: --> [2:OK] Mar 23 11:00:29.70: [ 1127]: <-- [7:ATL1M1\r] Mar 23 11:00:29.74: [ 1127]: --> [2:OK] Mar 23 11:00:29.74: [ 1127]: <-- [12:AT+FCLASS=2\r] Mar 23 11:00:29.89: [ 1127]: --> [2:OK] Mar 23 11:00:29.89: [ 1127]: <-- [10:AT+FTBC=0\r] Mar 23 11:00:30.03: [ 1127]: --> [2:OK] Mar 23 11:00:30.03: [ 1127]: <-- [10:AT+FBOR=0\r] Mar 23 11:00:30.17: [ 1127]: --> [2:OK] Mar 23 11:00:30.17: [ 1127]: <-- [13:AT+FPHCTO=30\r] Mar 23 11:00:30.31: [ 1127]: --> [2:OK] Mar 23 11:00:30.31: [ 1127]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r] Mar 23 11:00:30.46: [ 1127]: --> [2:OK] Mar 23 11:00:30.46: [ 1127]: <-- [29:AT+FLID="+61-(0)3-9553 1624"\r] Mar 23 11:00:30.61: [ 1127]: --> [2:OK] Mar 23 11:00:30.65: [ 1127]: DIAL 149900113284316504 Mar 23 11:00:30.65: [ 1127]: <-- [23:ATDT149900113284316504\r] Mar 23 11:01:05.20: [ 1127]: --> [5:+FCON] Mar 23 11:01:07.52: [ 1127]: --> [153:+FNSF:00 00 11 80 00 8A 49 10 4C 45 43 52 4F 4D 42 53 20 57 41 49 4C 4C 45 54 00 46 00 86 04 30 30 30 30 80 C0 8F 02 01 00 01 01 01 01 04 45 36 FF FF FF ] Mar 23 11:01:07.52: [ 1127]: REMOTE NSF "00 00 11 80 00 8A 49 10 4C 45 43 52 4F 4D 42 53 20 57 41 49 4C 4C 45 54 00 46 00 86 04 30 30 30 30 80 C0 8F 02 01 00 01 01 01 01 04 45 36 FF FF FF" Mar 23 11:01:08.14: [ 1127]: --> [28:+FCSI:" +32 84 316504"] Mar 23 11:01:08.14: [ 1127]: REMOTE CSI "+32 84 316504" Mar 23 11:01:08.41: [ 1127]: --> [21:+FDIS:1,3,0,2,1,2,0,3] Mar 23 11:01:08.41: [ 1127]: --> [2:OK] Mar 23 11:01:08.41: [ 1127]: REMOTE best rate 9600 bit/s Mar 23 11:01:08.41: [ 1127]: REMOTE max page width 1728 pixels in 215 mm Mar 23 11:01:08.41: [ 1127]: REMOTE max unlimited page length Mar 23 11:01:08.41: [ 1127]: REMOTE best vres 7.7 line/mm Mar 23 11:01:08.41: [ 1127]: REMOTE best format 2-D MR Mar 23 11:01:08.41: [ 1127]: REMOTE supports T.30 Annex C, half duplex ECM Mar 23 11:01:08.41: [ 1127]: REMOTE best 10 ms/scanline Mar 23 11:01:08.41: [ 1127]: USE 9600 bit/s Mar 23 11:01:08.41: [ 1127]: USE 10 ms/scanline Mar 23 11:01:08.41: [ 1127]: SEND file "docq/doc7.ps;00" Mar 23 11:01:08.42: [ 1127]: USE page width 1728 pixels in 215 mm Mar 23 11:01:08.42: [ 1127]: USE unlimited page length Mar 23 11:01:08.42: [ 1127]: USE 3.85 line/mm Mar 23 11:01:08.42: [ 1127]: USE 1-D MR Mar 23 11:01:08.42: [ 1127]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,3\r] Mar 23 11:01:08.57: [ 1127]: --> [2:OK] Mar 23 11:01:08.57: [ 1127]: <-- [7:AT+FDT\r] Mar 23 11:01:16.02: [ 1127]: --> [21:+FDCS:0,3,0,2,0,0,0,3] Mar 23 11:01:16.02: [ 1127]: --> [7:CONNECT] Mar 23 11:01:16.02: [ 1127]: SEND wait for XON Mar 23 11:01:16.02: [ 1127]: --> [1:] Mar 23 11:01:16.02: [ 1127]: SEND begin page Mar 23 11:01:16.03: [ 1127]: <-- data [1026] Mar 23 11:01:16.03: [ 1127]: <-- data [1025] Mar 23 11:01:16.03: [ 1127]: <-- data [1024] Mar 23 11:01:16.03: [ 1127]: <-- data [1025] Mar 23 11:01:16.03: [ 1127]: <-- data [1025] Mar 23 11:01:17.46: [ 1127]: <-- data [1025] Mar 23 11:01:18.95: [ 1127]: <-- data [1026] Mar 23 11:01:19.87: [ 1127]: <-- data [1028] Mar 23 11:01:20.80: [ 1127]: <-- data [1025] Mar 23 11:01:22.01: [ 1127]: <-- data [1024] Mar 23 11:01:22.66: [ 1127]: <-- data [1027] Mar 23 11:01:24.65: [ 1127]: <-- data [1028] Mar 23 11:01:25.30: [ 1127]: <-- data [1027] Mar 23 11:01:26.85: [ 1127]: <-- data [1026] Mar 23 11:01:27.73: [ 1127]: <-- data [1024] Mar 23 11:01:28.64: [ 1127]: <-- data [459] Mar 23 11:01:28.64: [ 1127]: SENT 15819 bytes of data Mar 23 11:01:28.64: [ 1127]: <-- data [2] Mar 23 11:01:34.55: [ 1127]: SEND end page Mar 23 11:01:35.21: [ 1127]: --> [2:OK] Mar 23 11:01:35.21: [ 1127]: SEND send MPS (more pages, same document) Mar 23 11:01:35.21: [ 1127]: <-- [9:AT+FET=0\r] Mar 23 11:01:40.36: [ 1127]: --> [7:+FPTS:2] Mar 23 11:01:40.36: [ 1127]: --> [2:OK] Mar 23 11:01:40.36: [ 1127]: SEND recv RTN (retrain negative) Mar 23 11:01:40.36: [ 1127]: <-- [7:AT+FDT\r] Mar 23 11:01:47.84: [ 1127]: --> [7:CONNECT] Mar 23 11:01:47.84: [ 1127]: SEND wait for XON Mar 23 11:01:47.84: [ 1127]: --> [1:] Mar 23 11:01:47.84: [ 1127]: SEND begin page Mar 23 11:01:47.85: [ 1127]: <-- data [1026] Mar 23 11:01:47.85: [ 1127]: <-- data [1025] Mar 23 11:01:47.85: [ 1127]: <-- data [1024] Mar 23 11:01:47.85: [ 1127]: <-- data [1025] Mar 23 11:01:47.85: [ 1127]: <-- data [1025] Mar 23 11:01:49.19: [ 1127]: <-- data [1025] Mar 23 11:01:50.57: [ 1127]: <-- data [1026] Mar 23 11:01:51.50: [ 1127]: <-- data [1028] Mar 23 11:01:52.43: [ 1127]: <-- data [1025] Mar 23 11:01:53.49: [ 1127]: <-- data [1024] Mar 23 11:01:54.75: [ 1127]: <-- data [1027] Mar 23 11:01:55.99: [ 1127]: <-- data [1028] Mar 23 11:01:57.36: [ 1127]: <-- data [1027] Mar 23 11:01:58.14: [ 1127]: <-- data [1026] Mar 23 11:01:58.92: [ 1127]: <-- data [1024] Mar 23 11:01:59.83: [ 1127]: <-- data [459] Mar 23 11:02:00.75: [ 1127]: SENT 15819 bytes of data Mar 23 11:02:00.75: [ 1127]: <-- data [2] Mar 23 11:02:06.53: [ 1127]: SEND end page Mar 23 11:02:07.04: [ 1127]: --> [2:OK] Mar 23 11:02:07.04: [ 1127]: SEND send MPS (more pages, same document) Mar 23 11:02:07.04: [ 1127]: <-- [9:AT+FET=0\r] Mar 23 11:02:12.20: [ 1127]: --> [7:+FPTS:2] Mar 23 11:02:12.20: [ 1127]: --> [2:OK] Mar 23 11:02:12.20: [ 1127]: SEND recv RTN (retrain negative) Mar 23 11:02:12.20: [ 1127]: <-- [7:AT+FDT\r] Mar 23 11:02:19.70: [ 1127]: --> [7:CONNECT] Mar 23 11:02:19.70: [ 1127]: SEND wait for XON Mar 23 11:02:19.70: [ 1127]: --> [1:] Mar 23 11:02:19.70: [ 1127]: SEND begin page Mar 23 11:02:19.71: [ 1127]: <-- data [1026] Mar 23 11:02:19.71: [ 1127]: <-- data [1025] Mar 23 11:02:19.71: [ 1127]: <-- data [1024] Mar 23 11:02:19.71: [ 1127]: <-- data [1025] Mar 23 11:02:19.71: [ 1127]: <-- data [1025] Mar 23 11:02:21.05: [ 1127]: <-- data [1025] Mar 23 11:02:22.43: [ 1127]: <-- data [1026] Mar 23 11:02:23.36: [ 1127]: <-- data [1028] Mar 23 11:02:24.29: [ 1127]: <-- data [1025] Mar 23 11:02:25.35: [ 1127]: <-- data [1024] Mar 23 11:02:26.61: [ 1127]: <-- data [1027] Mar 23 11:02:27.85: [ 1127]: <-- data [1028] Mar 23 11:02:29.24: [ 1127]: <-- data [1027] Mar 23 11:02:30.03: [ 1127]: <-- data [1026] Mar 23 11:02:30.82: [ 1127]: <-- data [1024] Mar 23 11:02:31.73: [ 1127]: <-- data [459] Mar 23 11:02:32.65: [ 1127]: SENT 15819 bytes of data Mar 23 11:02:32.65: [ 1127]: <-- data [2] Mar 23 11:02:38.42: [ 1127]: SEND end page Mar 23 11:02:38.90: [ 1127]: --> [2:OK] Mar 23 11:02:38.90: [ 1127]: SEND send MPS (more pages, same document) Mar 23 11:02:38.90: [ 1127]: <-- [9:AT+FET=0\r] Mar 23 11:03:10.52: [ 1127]: --> [8:+FHNG:54] Mar 23 11:03:10.52: [ 1127]: REMOTE HANGUP: No response to EOP repeated 3 times (code 54) Mar 23 11:03:10.52: [ 1127]: <-- [5:ATH0\r] Mar 23 11:03:11.13: [ 1127]: --> [2:OK] Mar 23 11:03:11.13: [ 1127]: SESSION END
- Follow-Ups:
- Re: Only first page sent, but 3 times
- From: Hong Kong Observatory <d1swdev@asiaonline.net>
- Re: Only first page sent, but 3 times
- Prev by Date: Re: FW: Whose looking after Hylafax?
- Next by Date: Re: FW: FW: Old modem list
- Prev by thread: Re: Old modem list
- Next by thread: Re: Only first page sent, but 3 times
- Index(es):
Project hosted by iFAX Solutions