flexfax: config directory not used and "fine print" problem

[Paul Wouters <paul@xtdnet.nl>]

Hi,

I'd like to report two problems I have.

I'm using HylaFAX 4.0pl12 on Linux (2.0.36) with libc5 using a Suprafax
288(V1.200-02-V34_DS)

First, all the programs seem to ignore the etc directory in /usr/spool/fax/etc
Changing parameters (like ModemDialCmd) doesn't work (even after restarting
faxgetty,hfaxd and faxq). Changing the modemdialcmd default in the source
directly fixed my problem. The uucp user can read the files without problems.
While trying to find the ModemDialCmd problem I also found changing the
ServerTracing didn't help either. I had to hardcode that as well.

Second, faxing works like a charm provided I have "fine print" disabled in
both the printer driver (Win98, Apple 16/600 PS) and the Whfc (1.0.4) client.
Enabling fine print causes the end of every page within a job to have a manged
part at the end (the end varying from halfway the page to about the bottom of it)
The part that _does_ print (using fine print) is of far better quality then
the same page sent without fine print enabled. This generates various
different arrors (or no errors at all).

I've upgraded to the latest ghostscript as well (5.10)

Below follows the log entry. (bulk data for fax snipped for list)

Thanks,

Paul Wouters



Mar 16 17:48:18.20: [15253]: SESSION BEGIN 00000010 3723631
Mar 16 17:48:18.20: [15253]: SEND FAX: JOB 70 DEST 3723631 COMMID 00000010
Mar 16 17:48:18.20: [15253]: MODEM set DTR OFF
Mar 16 17:48:18.20: [15253]: DELAY 2600 ms
Mar 16 17:48:20.81: [15253]: MODEM set DTR ON
Mar 16 17:48:20.81: [15253]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE
Mar 16 17:48:20.81: [15253]: MODEM flush i/o
Mar 16 17:48:20.81: [15253]: <-- [15:ATE0V1Q0S0=0H0\r]
Mar 16 17:48:20.81: [15253]: <-- <14:41 54 45 30 56 31 51 30 53 30 3D 30 48 30>
Mar 16 17:48:20.81: [15253]: <-- <1:0D>
Mar 16 17:48:20.97: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:20.97: [15253]: --> [2:OK]
Mar 16 17:48:20.97: [15253]: <-- [12:ATS8=2S7=60\r]
Mar 16 17:48:20.97: [15253]: <-- <11:41 54 53 38 3D 32 53 37 3D 36 30>
Mar 16 17:48:20.97: [15253]: <-- <1:0D>
Mar 16 17:48:21.12: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:21.12: [15253]: --> [2:OK]
Mar 16 17:48:21.12: [15253]: <-- [12:AT+FCLASS=2\r]
Mar 16 17:48:21.12: [15253]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 32>
Mar 16 17:48:21.12: [15253]: <-- <1:0D>
Mar 16 17:48:21.27: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:21.27: [15253]: --> [2:OK]
Mar 16 17:48:21.27: [15253]: <-- [10:AT+FTBC=0\r]
Mar 16 17:48:21.27: [15253]: <-- <9:41 54 2B 46 54 42 43 3D 30>
Mar 16 17:48:21.27: [15253]: <-- <1:0D>
Mar 16 17:48:21.42: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:21.42: [15253]: --> [2:OK]
Mar 16 17:48:21.42: [15253]: <-- [10:AT+FBOR=0\r]
Mar 16 17:48:21.42: [15253]: <-- <9:41 54 2B 46 42 4F 52 3D 30>
Mar 16 17:48:21.42: [15253]: <-- <1:0D>
Mar 16 17:48:21.57: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:21.57: [15253]: --> [2:OK]
Mar 16 17:48:21.57: [15253]: <-- [13:AT+FPHCTO=30\r]
Mar 16 17:48:21.57: [15253]: <-- <12:41 54 2B 46 50 48 43 54 4F 3D 33 30>
Mar 16 17:48:21.57: [15253]: <-- <1:0D>
Mar 16 17:48:21.72: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:21.72: [15253]: --> [2:OK]
Mar 16 17:48:21.72: [15253]: <-- [10:AT+FBUG=1\r]
Mar 16 17:48:21.72: [15253]: <-- <9:41 54 2B 46 42 55 47 3D 31>
Mar 16 17:48:21.72: [15253]: <-- <1:0D>
Mar 16 17:48:21.87: [15253]: --> <9:0D 0A 45 52 52 4F 52 0D 0A>
Mar 16 17:48:21.87: [15253]: --> [5:ERROR]
Mar 16 17:48:21.87: [15253]: MODEM Command error
Mar 16 17:48:21.87: [15253]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Mar 16 17:48:21.87: [15253]: <-- <23:41 54 2B 46 44 43 43 3D 31 2C 35 2C 32 2C 32 2C 31 2C 30 2C 30 2C 30>
Mar 16 17:48:21.87: [15253]: <-- <1:0D>
Mar 16 17:48:22.03: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:22.03: [15253]: --> [2:OK]
Mar 16 17:48:22.03: [15253]: <-- [7:ATL0M1\r]
Mar 16 17:48:22.03: [15253]: <-- <6:41 54 4C 30 4D 31>
Mar 16 17:48:22.03: [15253]: <-- <1:0D>
Mar 16 17:48:22.18: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:22.18: [15253]: --> [2:OK]
Mar 16 17:48:22.18: [15253]: STATE CHANGE: RUNNING -> SENDING
Mar 16 17:48:22.18: [15253]: MODEM input buffering enabled
Mar 16 17:48:22.18: [15253]: <-- [12:AT+FCLASS=2\r]
Mar 16 17:48:22.18: [15253]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 32>
Mar 16 17:48:22.18: [15253]: <-- <1:0D>
Mar 16 17:48:22.44: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:22.44: [15253]: --> [2:OK]
Mar 16 17:48:22.44: [15253]: <-- [10:AT+FTBC=0\r]
Mar 16 17:48:22.44: [15253]: <-- <9:41 54 2B 46 54 42 43 3D 30>
Mar 16 17:48:22.44: [15253]: <-- <1:0D>
Mar 16 17:48:22.69: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:22.69: [15253]: --> [2:OK]
Mar 16 17:48:22.69: [15253]: <-- [10:AT+FBOR=0\r]
Mar 16 17:48:22.69: [15253]: <-- <9:41 54 2B 46 42 4F 52 3D 30>
Mar 16 17:48:22.69: [15253]: <-- <1:0D>
Mar 16 17:48:22.94: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:22.94: [15253]: --> [2:OK]
Mar 16 17:48:22.94: [15253]: <-- [13:AT+FPHCTO=30\r]
Mar 16 17:48:22.94: [15253]: <-- <12:41 54 2B 46 50 48 43 54 4F 3D 33 30>
Mar 16 17:48:22.94: [15253]: <-- <1:0D>
Mar 16 17:48:23.19: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:23.19: [15253]: --> [2:OK]
Mar 16 17:48:23.19: [15253]: <-- [10:AT+FBUG=1\r]
Mar 16 17:48:23.19: [15253]: <-- <9:41 54 2B 46 42 55 47 3D 31>
Mar 16 17:48:23.19: [15253]: <-- <1:0D>
Mar 16 17:48:23.44: [15253]: --> <9:0D 0A 45 52 52 4F 52 0D 0A>
Mar 16 17:48:23.44: [15253]: --> [5:ERROR]
Mar 16 17:48:23.44: [15253]: MODEM Command error
Mar 16 17:48:23.44: [15253]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Mar 16 17:48:23.44: [15253]: <-- <23:41 54 2B 46 44 43 43 3D 31 2C 35 2C 32 2C 32 2C 31 2C 30 2C 30 2C 30>
Mar 16 17:48:23.44: [15253]: <-- <1:0D>
Mar 16 17:48:23.70: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:23.70: [15253]: --> [2:OK]
Mar 16 17:48:23.70: [15253]: <-- [11:AT+FLID=""\r]
Mar 16 17:48:23.70: [15253]: <-- <10:41 54 2B 46 4C 49 44 3D 22 22>
Mar 16 17:48:23.70: [15253]: <-- <1:0D>
Mar 16 17:48:23.95: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:23.95: [15253]: --> [2:OK]
Mar 16 17:48:23.95: [15253]: DIAL 3723631
Mar 16 17:48:23.95: [15253]: <-- [16:ATX3DT0,3723631\r]
Mar 16 17:48:23.95: [15253]: <-- <15:41 54 58 33 44 54 30 2C 33 37 32 33 36 33 31>
Mar 16 17:48:23.95: [15253]: <-- <1:0D>
Mar 16 17:48:44.86: [15253]: --> <9:0D 0A 2B 46 43 4F 4E 0D 0A>
Mar 16 17:48:44.86: [15253]: --> [5:+FCON]
Mar 16 17:48:46.95: [15253]: --> <33:0D 0A 2B 46 43 53 49 3A 20 22 20 20 20 20 20 20 2B 33 31 20 32 34 20 33 37 32 33 36 33 31 22 0D 0A>
Mar 16 17:48:46.95: [15253]: --> [29:+FCSI: "      +31 24 3723631"]
Mar 16 17:48:46.95: [15253]: REMOTE CSI "+31 24 3723631"
Mar 16 17:48:47.26: [15253]: --> <26:0D 0A 2B 46 44 49 53 3A 20 31 2C 35 2C 30 2C 32 2C 31 2C 30 2C 30 2C 33 0D 0A>
Mar 16 17:48:47.26: [15253]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
Mar 16 17:48:47.37: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:47.37: [15253]: --> [2:OK]
Mar 16 17:48:47.37: [15253]: REMOTE best rate 14400 bit/s
Mar 16 17:48:47.37: [15253]: REMOTE max page width 1728 pixels in 215 mm
Mar 16 17:48:47.37: [15253]: REMOTE max unlimited page length 
Mar 16 17:48:47.37: [15253]: REMOTE best vres 7.7 line/mm
Mar 16 17:48:47.37: [15253]: REMOTE best format 2-D MR
Mar 16 17:48:47.37: [15253]: REMOTE best 10 ms/scanline
Mar 16 17:48:47.37: [15253]: USE 14400 bit/s
Mar 16 17:48:47.37: [15253]: USE 10 ms/scanline
Mar 16 17:48:47.37: [15253]: SEND file "docq/doc80.ps;00"
Mar 16 17:48:47.37: [15253]: USE page width 1728 pixels in 215 mm
Mar 16 17:48:47.37: [15253]: USE unlimited page length 
Mar 16 17:48:47.37: [15253]: USE 3.85 line/mm
Mar 16 17:48:47.37: [15253]: USE 1-D MR
Mar 16 17:48:47.37: [15253]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r]
Mar 16 17:48:47.38: [15253]: <-- <23:41 54 2B 46 44 49 53 3D 30 2C 35 2C 30 2C 32 2C 30 2C 30 2C 30 2C 33>
Mar 16 17:48:47.38: [15253]: <-- <1:0D>
Mar 16 17:48:47.64: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:48:47.64: [15253]: --> [2:OK]
Mar 16 17:48:47.64: [15253]: <-- [7:AT+FDT\r]
Mar 16 17:48:47.64: [15253]: <-- <6:41 54 2B 46 44 54>
Mar 16 17:48:47.64: [15253]: <-- <1:0D>
Mar 16 17:48:54.82: [15253]: --> <38:0D 0A 2B 46 44 43 53 3A 20 30 2C 35 2C 30 2C 32 2C 30 2C 30 2C 30 2C 33 0D 0A 0D 0A 43 4F 4E 4E 45 43 54 0D 0A 11>
Mar 16 17:48:54.82: [15253]: --> [22:+FDCS: 0,5,0,2,0,0,0,3]
Mar 16 17:48:54.82: [15253]: --> [7:CONNECT]
Mar 16 17:48:54.82: [15253]: SEND wait for XON
Mar 16 17:48:54.82: [15253]: --> [1:]
Mar 16 17:48:54.82: [15253]: SEND begin page
Mar 16 17:48:54.82: [15253]: <-- data [1027]
Mar 16 17:48:54.82: [15253]: <-- <1027: [snip]
Mar 16 17:48:54.83: [15253]: <-- data [1024]
Mar 16 17:48:54.83: [15253]: <-- <1024: [snip]

[snip]

Mar 16 17:49:14.85: [15253]: <-- data [342]
Mar 16 17:49:14.85: [15253]: <-- <342:[snip]
Mar 16 17:49:14.85: [15253]: SENT 40276 bytes of data
Mar 16 17:49:14.85: [15253]: <-- data [2]
Mar 16 17:49:14.85: [15253]: <-- <2:10 03>
Mar 16 17:49:14.85: [15253]: SEND end page
Mar 16 17:49:14.95: [15253]: --> <1:13>
Mar 16 17:49:19.40: [15253]: --> <1:11>
Mar 16 17:49:22.89: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:49:22.89: [15253]: --> [2:]
Mar 16 17:49:22.89: [15253]: --> [2:OK]
Mar 16 17:49:22.89: [15253]: SEND send EOP (no more pages or documents)
Mar 16 17:49:22.89: [15253]: <-- [9:AT+FET=2\r]
Mar 16 17:49:22.89: [15253]: <-- <8:41 54 2B 46 45 54 3D 32>
Mar 16 17:49:22.89: [15253]: <-- <1:0D>
Mar 16 17:49:25.88: [15253]: --> <12:0D 0A 2B 46 50 54 53 3A 20 31 0D 0A>
Mar 16 17:49:25.88: [15253]: --> [8:+FPTS: 1]
Mar 16 17:49:25.88: [15253]: SEND recv MCF (message confirmation)
Mar 16 17:49:25.88: [15253]: SEND FAX (00000010): FROM pwouters@xtdnet.nl TO 3723631 (page 1 of 1 sent in 0:38)
Mar 16 17:49:25.88: [15253]: SEND FAX (00000010): FROM pwouters@xtdnet.nl TO 3723631 (docq/doc80.ps;00 sent in 0:38)
Mar 16 17:49:25.88: [15253]: <-- [5:ATH0\r]
Mar 16 17:49:25.88: [15253]: <-- <4:41 54 48 30>
Mar 16 17:49:25.88: [15253]: <-- <1:0D>
Mar 16 17:49:27.51: [15253]: --> <12:0D 0A 2B 46 48 4E 47 3A 20 30 0D 0A>
Mar 16 17:49:27.51: [15253]: --> [8:+FHNG: 0]
Mar 16 17:49:27.51: [15253]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Mar 16 17:49:28.09: [15253]: --> <6:0D 0A 4F 4B 0D 0A>
Mar 16 17:49:28.09: [15253]: --> [2:OK]
Mar 16 17:49:28.09: [15253]: MODEM set DTR OFF
Mar 16 17:49:28.09: [15253]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 16 17:49:28.09: [15253]: SESSION END