flexfax: Receive no lines, Send characters cut

["Horst Simon" <hsimon@vic.bigpond.net.au>]

I have the binary distribution of HylaFAX v4.0pl2 on Linux RedHat 5.2
installed, using
a Hayes Optima 336.

When receiving a fax I get empty pages and the trace says 0 lines received,
but the
transmitting unit says succesful.

When I send a fax using sendfax the lines are running into each other, the
attachment
in tif is the cover page which was the receiving unit had received.

Following trace was when receiving a fax. Any help is appreciated.

Thanks and regards,
Horst Simon

===============================
|   Horst Simon               |
|   9 Stonehaven Crescent     |
|   Moorabbin, Vic, 3189      |
|   Australia                 |
|   hsimon@vic.bigpond.net.au |
===============================
Trace when receiving:
Mar 02 21:40:24.98: [  327]: SESSION BEGIN 00000004 610395531624
Mar 02 21:40:24.98: [  327]: <-- [4:ATA\r]
Mar 02 21:40:35.97: [  327]: --> [5:+FCON]
Mar 02 21:40:35.97: [  327]: ANSWER: FAX CONNECTION
Mar 02 21:40:35.97: [  327]: RECV FAX: begin
Mar 02 21:40:37.47: [  327]: --> [28:+FTSI:"+613 9553-1624      "]
Mar 02 21:40:37.47: [  327]: REMOTE TSI "+613 9553-1624"
Mar 02 21:40:37.76: [  327]: --> [21:+FDCS:1,3,0,2,0,0,0,3]
Mar 02 21:40:37.76: [  327]: REMOTE wants 9600 bit/s
Mar 02 21:40:37.76: [  327]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 21:40:37.76: [  327]: REMOTE wants unlimited page length
Mar 02 21:40:37.76: [  327]: REMOTE wants 7.7 line/mm
Mar 02 21:40:37.76: [  327]: REMOTE wants 1-D MR
Mar 02 21:40:37.76: [  327]: --> [2:OK]
Mar 02 21:40:37.76: [  327]: <-- [7:AT+FDR\r]
Mar 02 21:40:42.10: [  327]: --> [5:+FCFR]
Mar 02 21:40:42.10: [  327]: --> [21:+FDCS:1,3,0,2,0,0,0,3]
Mar 02 21:40:42.10: [  327]: REMOTE wants 9600 bit/s
Mar 02 21:40:42.10: [  327]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 21:40:42.10: [  327]: REMOTE wants unlimited page length
Mar 02 21:40:42.10: [  327]: REMOTE wants 7.7 line/mm
Mar 02 21:40:42.10: [  327]: REMOTE wants 1-D MR
Mar 02 21:40:42.10: [  327]: --> [7:CONNECT]
Mar 02 21:40:42.10: [  327]: RECV: begin page
Mar 02 21:40:42.11: [  327]: RECV: send trigger 021
Mar 02 21:40:42.11: [  327]: <-- data [1]
Mar 02 21:41:10.89: [  327]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Mar 02 21:41:10.89: [  327]: --> [7:+FPTS:1]
Mar 02 21:41:16.26: [  327]: --> [6:+FET:0]
Mar 02 21:41:16.26: [  327]: RECV recv MPS (more pages, same document)
Mar 02 21:41:16.26: [  327]: --> [2:OK]
Mar 02 21:41:16.26: [  327]: RECV send MCF (message confirmation)
Mar 02 21:41:16.27: [  327]: RECV FAX (00000004): from +613 9553-1624, page
1 in 0:39, INF, 7.7 line/mm, 1-D MR
Mar 02 21:41:16.27: [  327]: <-- [7:AT+FDR\r]
Mar 02 21:41:18.45: [  327]: --> [7:CONNECT]
Mar 02 21:41:18.45: [  327]: RECV: begin page
Mar 02 21:41:18.45: [  327]: RECV: send trigger 021
Mar 02 21:41:18.45: [  327]: <-- data [1]
Mar 02 21:42:02.26: [  327]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Mar 02 21:42:02.26: [  327]: --> [7:+FPTS:1]
Mar 02 21:42:07.64: [  327]: --> [6:+FET:2]
Mar 02 21:42:07.64: [  327]: RECV recv EOP (no more pages or documents)
Mar 02 21:42:07.64: [  327]: --> [2:OK]
Mar 02 21:42:07.64: [  327]: RECV send MCF (message confirmation)
Mar 02 21:42:07.65: [  327]: RECV FAX (00000004): from +613 9553-1624, page
2 in 0:51, INF, 7.7 line/mm, 1-D MR
Mar 02 21:42:07.65: [  327]: RECV FAX (00000004): recvq/fax00003.tif from
+613 9553-1624, route to <unspecified>, 2 pages in 1:32
Mar 02 21:42:07.65: [  327]: <-- [7:AT+FDR\r]
Mar 02 21:42:10.41: [  327]: --> [7:+FHNG:0]
Mar 02 21:42:10.41: [  327]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Mar 02 21:42:10.41: [  327]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif"
"cua1" "00000004" ""
Mar 02 21:42:12.31: [  327]: RECV FAX: end
Mar 02 21:42:12.31: [  327]: SESSION END

END TRACE

Attachment of send fax how the receiver gets it.

COVER.TIF