flexfax: COMREC error (multitech 2834ZDXK)

[darrellb <darrellb@hhcl.com>]

Any idea on the following:

thanks!

An attempt to receive facsimile on modem failed because:

    COMREC error

    ---- Transcript of session follows ----

Mar 01 09:33:29.20: [  326]: SESSION BEGIN 00000941 441714362677
Mar 01 09:33:29.20: [  326]: <-- [4:ATA\r]
Mar 01 09:33:37.03: [  326]: --> [5:+FCON]
Mar 01 09:33:37.03: [  326]: ANSWER: FAX CONNECTION
Mar 01 09:33:37.03: [  326]: RECV FAX: begin
Mar 01 09:33:41.54: [  326]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Mar 01 09:33:41.54: [  326]: REMOTE wants 14400 bit/s
Mar 01 09:33:41.54: [  326]: REMOTE wants page width 1728 pixels in 215 mm
Mar 01 09:33:41.54: [  326]: REMOTE wants unlimited page length 
Mar 01 09:33:41.54: [  326]: REMOTE wants 3.85 line/mm
Mar 01 09:33:41.54: [  326]: REMOTE wants 2-D MR
Mar 01 09:33:41.54: [  326]: --> [2:OK]
Mar 01 09:33:41.54: [  326]: <-- [7:AT+FDR\r]
Mar 01 09:33:42.97: [  326]: --> [5:+FCFR]
Mar 01 09:33:42.97: [  326]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Mar 01 09:33:42.97: [  326]: REMOTE wants 14400 bit/s
Mar 01 09:33:42.97: [  326]: REMOTE wants page width 1728 pixels in 215 mm
Mar 01 09:33:42.97: [  326]: REMOTE wants unlimited page length 
Mar 01 09:33:42.97: [  326]: REMOTE wants 3.85 line/mm
Mar 01 09:33:42.97: [  326]: REMOTE wants 2-D MR
Mar 01 09:33:43.55: [  326]: --> [7:CONNECT]
Mar 01 09:33:43.55: [  326]: RECV: begin page
Mar 01 09:33:43.55: [  326]: RECV: send trigger 022
Mar 01 09:33:49.87: [  326]: RECV: 9680 bytes of data, 345 total lines
Mar 01 09:33:49.98: [  326]: --> [15:+FPTS:1,0,0,0,0]
Mar 01 09:33:56.42: [  326]: --> [8:+FHNG:72]
Mar 01 09:33:56.42: [  326]: REMOTE HANGUP: COMREC error (code 72)
Mar 01 09:33:56.70: [  326]: --> [2:OK]
Mar 01 09:33:56.70: [  326]: RECV FAX (00000941): recvq/fax00243.tif from , route to <unspecified>, 0 pages in 0:19
Mar 01 09:33:56.70: [  326]: RECV FAX: COMREC error
Mar 01 09:33:56.70: [  326]: RECV FAX (00000941): session with  terminated abnormally: COMREC error
Mar 01 09:33:56.70: [  326]: RECV FAX: bin/faxrcvd "recvq/fax00243.tif" "modem" "00000941" "COMREC error"