HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: (no subject)



Without running faxgetty, you will always get the "Waiting for modem to
come ready" message unless an actual fax is sent.

Most people on the list would recoment using faxgetty.

>From this, we can't really see why things aren't working.

What is the result of "ps -ax | grep fax"?

It looks like you're running hfaxd from inetd.  Again, I think most
people would recomend running it as a standalone if you are going to be
using HylaFAX frequently.

Also, HylaFAX does log information to syslog.  Bump up the
ServerTracing: value in the etc/config and see what comes out in your
logs.

a.

On 27 Feb, Balaji Shantaram wrote:
> Sir,
>    We are hylafax users. We had installed hylafax in linux platform, 
> before we were through without any problems. But as our linux machine 
> had gone down we had to install hylafax once again. But now we have a 
> problem. If we run faxstat we used to get
>      Hylafax scheduler on ramba.oops.org : Running
>      Modem cua2 (+91.044.8594139):Waiting for modem to come ready
> But now we don't get the modem part and we  are not able send any fax.
> 
> Hylafax scheduler on ramba.oops.org : Running. 
>   This is the content we get using faxstat. 
> if we use sendfax i get all the jobid and other things but vanishes 
> suddenly without it is been converted to fax.
>   We Kindly request you to give the process(es) that has to be performed 
> to overcome this.
> 
> Note:
> This id the process we did for the installation
> 1 tar -xvzf hylafax.gz
> 2 cd hylafax-v4.0pl2
> 3 ./configure
> 4 make
> 5 su
> 6 make install
> 7 faxsetup
> 8 faxaddmodem
> 9 faxmodem....
> 10 sendfax
> 11 faxstat
> 
> awaiting your reply,
> 
> regards
> Malshantbalaji from OOPS Pvt Ltd.
> 
> 
> 
> 
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com





Project hosted by iFAX Solutions