HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problem viewing(recieving?)



[ Caution - you explicitly addressed this to me but are addressing a person
  as you who is only being reached through the mailing list, if indeed, he
  subscribed. ]

> > > Feb 21 10:26:24.49: [  449]: RECV: 17 total lines, 0 bad lines, 0
> > > consecutive bad lines
> > > Feb 21 10:26:24.50: [  449]: --> [17:+FPTS: 1,2219,0,0]
> 
> 
> you only recieve 17 lines.
> I recieve about 1000 lines for A4.

He's actually in fine mode and received 2219 lines (the figure from the
FPTS message) but only got 17.  However, cover pages do tend to be short
so it is not uncommon for a cover page to be 300 to 400 lines, although not
that short!

> 
> You send trigger 021.
> I think there is a problem with trigger 021.
> In my config there is:
> Class2RecvDataTrigger:  "\022"          # character sent to modem to start recv

I missed this one and didn't find DC1 rather than DC2 to be unreasonable
given that historically DC1 started a paper tape reader and DC2 turned
on the punch.  However, none of the standard configurations supplied
with Hylafax use DC2 and Rockwell chips certainly use DC2, according to
the generic Rockwell modem manual.  Short of buying the specs, it looks
like DC2 is right.

I wonder what it actually sent back in order to make Hylafax see 17 lines.

I'm certainly much more happy with this explanation than the flow control
one, in this case.

(DCx is device control x.  DC1 is also called XON and DC3 XOFF.)




Project hosted by iFAX Solutions