HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Unspecified Transmit Phase D error

To: dak@dca-uk.net
Subject: Re: flexfax: Unspecified Transmit Phase D error
From: David Woolley <david@djwhome.demon.co.uk>
Cc: flexfax@sgi.com
Reply-To: flexfax@sgi.com
Date: Sat, 20 Feb 1999 12:04:34 +0000 (GMT)

> The end result at the other end is a fax with the first 5-6 lines OK but the 
> rest are all squished and partially printed..

Much more likely these are both due to a common underlying cause of 
broken flow control.

> This only happens to a few faxes that I send.
> I'm using hylafax 4.0 and Linux 2.2.1 witha US Robotics (3com) 56K modem

Not a reccommended modem.

References:
- Unspecified Transmit Phase D error
  - From: David Kranz <dak@dca-uk.net>

Prev by Date: Re: Hylafax
Next by Date: WHCF takes a lot to login
Prev by thread: Unspecified Transmit Phase D error
Next by thread: WHCF takes a lot to login
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions