flexfax: Re: your mail

[Karl Denninger <karl@Denninger.Net>]

You have access control turned on and the file controlling the black-list
is either missing or is inappropriately protected.

The default installation will do this to you; go back and read the docs.
It took me a few minutes to find this on a recent new install myself.

--
-- 
Karl Denninger (karl@denninger.net) http://www.mcs.net/~karl
I ain't even *authorized* to speak for anyone other than myself, so give
up now on trying to associate my words with any particular organization.


On Mon, Feb 15, 1999 at 06:07:27PM +0200, JC wrote:
> Hi there, 
> 
> Attached you will find the logs for facimile not received. I am not sure
> why, but I am hoping somebody would be able to help me out.
> 
> 
> [Feb 15 08:02:38.05: [  365]: RECV FAX: Permission denied (unacceptable
> client TSI)]
> 
> Thanks
> 
> 
> /jc
> __________________________________________
> ICON Operations & Infrastructure
> ICON Abuse Team - http://www.icon.co.za/abuse
> ICON - Your personal Internet solution
> Tel: +27-11-283-5566
> Fax: +27-11-283-5556
> 
> 
> -----Original Message-----
> From: The HylaFAX Receive Agent 
> Sent: Monday, February 15, 1999 6:09 PM
> To: jc@is.co.za
> Subject: facsimile not received
> 
> 
> An attempt to receive facsimile on modem failed because:
> 
>     
> 
>     ---- Transcript of session follows ----
> 
> Feb 15 08:02:19.68: [  365]: SESSION BEGIN 00000029 270112835556
> Feb 15 08:02:19.68: [  365]: <-- [4:ATA\r]
> Feb 15 08:02:23.86: [  365]: --> [7:CONNECT]
> Feb 15 08:02:23.86: [  365]: ANSWER: FAX CONNECTION
> Feb 15 08:02:23.86: [  365]: RECV FAX: begin
> Feb 15 08:02:25.55: [  365]: --> [7:CONNECT]
> Feb 15 08:02:26.09: [  365]: --> [2:OK]
> Feb 15 08:02:26.09: [  365]: <-- [9:AT+FRH=3\r]
> Feb 15 08:02:29.19: [  365]: --> [0:]
> Feb 15 08:02:29.19: [  365]: MODEM <Empty line>
> Feb 15 08:02:29.25: [  365]: --> [2:OK]
> Feb 15 08:02:29.25: [  365]: DELAY 1500 ms
> Feb 15 08:02:30.75: [  365]: <-- [9:AT+FTH=3\r]
> Feb 15 08:02:30.80: [  365]: --> [7:CONNECT]
> Feb 15 08:02:32.59: [  365]: --> [7:CONNECT]
> Feb 15 08:02:33.13: [  365]: --> [2:OK]
> Feb 15 08:02:33.13: [  365]: <-- [9:AT+FRH=3\r]
> Feb 15 08:02:33.56: [  365]: --> [7:CONNECT]
> Feb 15 08:02:34.61: [  365]: --> [2:OK]
> Feb 15 08:02:34.61: [  365]: REMOTE wants 9600 bit/s
> Feb 15 08:02:34.61: [  365]: REMOTE wants page width 1728 pixels in 215 mm
> Feb 15 08:02:34.61: [  365]: REMOTE wants unlimited page length 
> Feb 15 08:02:34.61: [  365]: REMOTE wants 3.85 line/mm
> Feb 15 08:02:34.61: [  365]: REMOTE wants 1-D MR
> Feb 15 08:02:34.61: [  365]: RECV training at v.29 9600 bit/s
> Feb 15 08:02:34.61: [  365]: <-- [10:AT+FRM=96\r]
> Feb 15 08:02:34.97: [  365]: --> [7:CONNECT]
> Feb 15 08:02:36.53: [  365]: RECV: TCF 1848 bytes, 2% non-zero, 1804
> zero-run
> Feb 15 08:02:36.53: [  365]: --> [10:NO CARRIER]
> Feb 15 08:02:36.53: [  365]: DELAY 75 ms
> Feb 15 08:02:36.61: [  365]: <-- [9:AT+FTH=3\r]
> Feb 15 08:02:36.66: [  365]: --> [7:CONNECT]
> Feb 15 08:02:37.98: [  365]: --> [2:OK]
> Feb 15 08:02:37.98: [  365]: TRAINING succeeded
> Feb 15 08:02:37.98: [  365]: REJECT TSI "<UNSPECIFIED>"
> Feb 15 08:02:38.05: [  365]: RECV FAX (00000029): recvq/fax00008.tif from
> <UNSPECIFIED>, route to <unspecified>, 0 pages in 0:14
> Feb 15 08:02:38.05: [  365]: RECV FAX: Permission denied (unacceptable
> client TSI)
> Feb 15 08:02:38.06: [  365]: <-- [9:AT+FTH=3\r]
> Feb 15 08:02:38.12: [  365]: --> [7:CONNECT]
> Feb 15 08:02:39.43: [  365]: --> [2:OK]
> Feb 15 08:02:39.43: [  365]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif"
> "modem" "00000029" ""