 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: EOP trouble
- To: flexfax@sgi.com
- Subject: Re: flexfax: EOP trouble
- From: Keith Elder <keith@acinc.com>
- Date: Mon, 01 Feb 1999 11:42:18 -0500
I wonder if this could actually be caused by the ghostscript or something like that. I have received these errors as well and wonder if this may be the cause? Keith At 10:37 AM 2/1/99 -0500, you wrote: >I've seen these types of errors too. What usually happens is that someone >will call me and complain that they get 3 copies of every fax I send. When I >look at the logs, it looks like their fax machine simply hangs up after >receiving the last page of the fax instead of doing the last little bit of >handshaking. I suspect a modification to the source code to ignore errors >after the last page is sent is needed. > >-----Original Message----- >From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com] >On Behalf Of Peter Bär >Sent: Friday, January 29, 1999 8:18 PM >To: flexfax@sgi.com >Subject: flexfax: EOP trouble > > >More and more of these "No response to EOP or MSP" problem reports >appear on this list, as it seems. Normally USR/3Com are blamed for >this, as their Class 2.0 implementation is non-standard. >However, especially in the last few weeks weeks several users of >other modems (Non-3Com) have reported similar trouble. > >Myself, I replaced my USR 56k Voice Fax Modem, thinking that this >would cure the problem. Now I have a Maxtech Net Pacer 56k Voice >Fax Modem. It is Class 2, so I thought, my troubles were over, now. >(A different make and a different protocol should really improve >things, I thought ;-)). > >However, nothing changed. With certain fax machines I am still >having trouble. Not with fax modems, just with conventional (paper) >fax machines. > >After the transmission of the last page (even if there is only one) >I get this error message. > >No response to EOP repeated 3 times. > >What does that actually mean? And what is it that causes the different >behaviour of fax machines (error) and fax modems (no problem)? I should >mention that the problem occurs with *old* fax machines. With newer >models normally everything is ok. > >Any tips and hints and explanations will be greatly appreciated! > > Regards > Peter > >------------------------------------------------------------------------ >>>> FAX TRANSMISSION LOG <<< >**************************** >n 30 00:39:56 orion7 FaxQueuer[156]: SUBMIT JOB 7 >Jan 30 00:39:56 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 >pri > 127 tts 0:00 killtime 2:59:00): PREPARE START >Jan 30 00:39:56 orion7 FaxQueuer[1747]: JOB 7 (active dest >+49109809519522222 pr >i 127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o >docq/doc6.ps;0 >0 -r 98 -w 1728 -l 297 -m 30 -1 docq/doc6.ps.7 >Jan 30 00:39:56 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing >number >in job request >Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 >pri > 127 tts 0:00 killtime 2:58:58): PREPARE DONE >Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 >pri > 127 tts 0:00 killtime 2:58:58): CMD START /usr/lib/fax/faxsend -m modem >sendq/q >7 (PID 1752) >Jan 30 00:40:00 orion7 FaxSend[1752]: MODEM set DTR OFF >Jan 30 00:40:00 orion7 FaxSend[1752]: DELAY 2600 ms >Jan 30 00:40:00 orion7 FaxGetty[170]: ANSWER: Can not lock modem device >Jan 30 00:40:01 orion7 kernel: lp1 out of paper >Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set DTR ON >Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set baud rate: 38400 baud, input >flo >w RTS/CTS, output flow RTS/CTS >Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM flush i/o >Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [15:ATE0V1Q0S0=0H0\r] >Jan 30 00:40:02 orion7 FaxSend[1752]: --> [14:ATE0V1Q0S0=0H0] >Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] >Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [9:0,1,2,1.0] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMFR?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [20:ROCKWELL ] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMDL?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [13:AC/K56^I^I ] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FREV?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [17:V2.077-V90_2M_DLS] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FDCC=?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> >[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7 >)] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FCQ=?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [1:0] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FAP=?\r] >Jan 30 00:40:03 orion7 FaxSend[1752]: --> [5:ERROR] >Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FSPL=?\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [3:0,1] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FTBC=0\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FBOR=0\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [13:AT+FPHCTO=30\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM ROCKWELL >AC/K56/V2.077-V90_2M_DLS >Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [5:ATM0\r] >Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] >Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM input buffering disabled >Jan 30 00:40:04 orion7 FaxSend[1752]: SEND FAX: JOB 7 DEST 0109809519522222 >COMM >ID 00000029 >Jan 30 00:40:11 orion7 kernel: lp1 out of paper >Jan 30 00:40:31 orion7 last message repeated 2 times >Jan 30 00:40:32 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing >number >in job request >Jan 30 00:40:41 orion7 kernel: lp1 out of paper >Jan 30 00:40:51 orion7 kernel: lp1 out of paper >Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 >pri > 127 tts 0:00 killtime 2:58:02): CMD DONE: exit status 0 >Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (sleeping dest >+49109809519522222 p >ri 126 tts 0:00 killtime 2:58:02): SEND INCOMPLETE: requeue for 4:59; No >respons >e to EOP repeated 3 times >Jan 30 00:40:54 orion7 FaxQueuer[156]: NOTIFY: bin/notify "sendq/q7" >"requeued" >"" "00:45" >Jan 30 00:40:57 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing >number >in job request >Jan 30 00:41:00 orion7 FaxGetty[170]: MODEM set DTR OFF >Jan 30 00:41:00 orion7 FaxGetty[170]: DELAY 2600 ms >Jan 30 00:41:01 orion7 kernel: lp1 out of paper >Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set DTR ON >Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set baud rate: 38400 baud, input >flo >w RTS/CTS, output flow RTS/CTS >Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM flush i/o >Jan 30 00:41:02 orion7 FaxGetty[170]: <-- [15:ATE0V1Q0S0=0H0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [9:0,1,2,1.0] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMFR?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [20:ROCKWELL ] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMDL?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [13:AC/K56^I^I ] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FREV?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [17:V2.077-V90_2M_DLS] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FDCC=?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> >[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7 >)] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCQ=?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [5:ERROR] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FSPL=?\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [3:0,1] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FTBC=0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FBOR=0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [13:AT+FPHCTO=30\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM ROCKWELL >AC/K56/V2.077-V90_2M_DLS >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [5:ATM0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCR=1\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FLID="Orion 7"\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FAA=1+FCLASS=0\r] >Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] >Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM input buffering disabled >Jan 30 00:41:11 orion7 kernel: lp1 out of paper >Jan 30 00:41:14 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing >number >in job request > >---------------------------------------------------------------------------- >>>> MODEM CONFIGURATION <<< >*************************** >CountryCode: 49 >AreaCode: 911 >FAXNumber: +49.911.731851 >LongDistancePrefix: 0 >InternationalPrefix: 00 >DialStringRules: "etc/dialrules" >ServerTracing: 527 >SessionTracing: 527 >RecvFileMode: 0644 >LogFileMode: 0600 >DeviceMode: 0666 >RingsBeforeAnswer: 4 >SpeakerVolume: off >GettyArgs: "-r -b -s %s %l" >LocalIdentifier: "Orion 7" >TagLineFont: etc/lutRS18.pcf >TagLineFormat: "From %%l|%c|Page %%p of %%t" >MaxRecvPages: 25 ># ># Modem-related stuff: should reflect modem command interface ># and hardware connection/cabling (e.g. flow control). ># >ModemType: Class2 # use class 2 interface >ModemRate: 38400 >ModemFlowControl: rtscts # default ># >#ModemResetCmds: AT&F2 # what you want for a Supra >ModemNoFlowCmd: AT&K # disable flow control cmd >ModemHardFlowCmd: AT&K3 # hardware flow control cmd >ModemSoftFlowCmd: AT&K4 # software flow control cmd >ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset >#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this >ModemSetupDCDCmd: AT&C1 # DCD follows carrier >ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class ># >ModemSendFillOrder: LSB2MSB # as expected >ModemRecvFillOrder: MSB2LSB # opposite of what makes sense ># >ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive ># ># Caller ID configuration setup for Supra. ># >#QualifyCID: etc/cid # CID access control list file >#CIDNumber: "NMBR = " # pattern string for phone number >info >#CIDName: "NAME = " # pattern string for identity info > > > >-- >--------------------------------------------------------------------- > The manual said the software required Windows 95 > or better, so I installed Linux. > >>> comet.friend@gmx.net <<< >--------------------------------------------------------------------- > Keith Elder Affordable Computers, Inc. 1070 Rosewood Ann Arbor, MI 48104 voice: 734-761-1698 X.109 fax: 734-669-8485 email: keith@acinc.com Shop Online at: http://www.acinc.com Specials: Custom built NOTEBOOKS starting at $1259.00! IBM P70 17inch .26 1600x1200 res. monitor for only $219.00! Laptops Laptops Laptops, come visit our web site for your next purchase! Laptops as low as $199!
- Prev by Date: Re: A trivial WHFC question
- Next by Date: Hylafax
- Prev by thread: FW: EOP trouble
- Next by thread: Re: EOP trouble
- Index(es):
Project hosted by iFAX Solutions