 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
EOP trouble
- To: flexfax@sgi.com
- Subject: flexfax: EOP trouble
- From: Peter Bär <comet.friend@gmx.net>
- Reply-To: comet.friend@gmx.net
- Date: Sat, 30 Jan 1999 02:17:57 +0100
More and more of these "No response to EOP or MSP" problem reports appear on this list, as it seems. Normally USR/3Com are blamed for this, as their Class 2.0 implementation is non-standard. However, especially in the last few weeks weeks several users of other modems (Non-3Com) have reported similar trouble. Myself, I replaced my USR 56k Voice Fax Modem, thinking that this would cure the problem. Now I have a Maxtech Net Pacer 56k Voice Fax Modem. It is Class 2, so I thought, my troubles were over, now. (A different make and a different protocol should really improve things, I thought ;-)). However, nothing changed. With certain fax machines I am still having trouble. Not with fax modems, just with conventional (paper) fax machines. After the transmission of the last page (even if there is only one) I get this error message. No response to EOP repeated 3 times. What does that actually mean? And what is it that causes the different behaviour of fax machines (error) and fax modems (no problem)? I should mention that the problem occurs with *old* fax machines. With newer models normally everything is ok. Any tips and hints and explanations will be greatly appreciated! Regards Peter ------------------------------------------------------------------------ >>> FAX TRANSMISSION LOG <<< **************************** n 30 00:39:56 orion7 FaxQueuer[156]: SUBMIT JOB 7 Jan 30 00:39:56 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 pri 127 tts 0:00 killtime 2:59:00): PREPARE START Jan 30 00:39:56 orion7 FaxQueuer[1747]: JOB 7 (active dest +49109809519522222 pr i 127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o docq/doc6.ps;0 0 -r 98 -w 1728 -l 297 -m 30 -1 docq/doc6.ps.7 Jan 30 00:39:56 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing number in job request Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 pri 127 tts 0:00 killtime 2:58:58): PREPARE DONE Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 pri 127 tts 0:00 killtime 2:58:58): CMD START /usr/lib/fax/faxsend -m modem sendq/q 7 (PID 1752) Jan 30 00:40:00 orion7 FaxSend[1752]: MODEM set DTR OFF Jan 30 00:40:00 orion7 FaxSend[1752]: DELAY 2600 ms Jan 30 00:40:00 orion7 FaxGetty[170]: ANSWER: Can not lock modem device Jan 30 00:40:01 orion7 kernel: lp1 out of paper Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set DTR ON Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set baud rate: 38400 baud, input flo w RTS/CTS, output flow RTS/CTS Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM flush i/o Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [15:ATE0V1Q0S0=0H0\r] Jan 30 00:40:02 orion7 FaxSend[1752]: --> [14:ATE0V1Q0S0=0H0] Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [9:0,1,2,1.0] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMFR?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [20:ROCKWELL ] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMDL?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [13:AC/K56^I^I ] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FREV?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [17:V2.077-V90_2M_DLS] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FDCC=?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7 )] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FCQ=?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [1:0] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FAP=?\r] Jan 30 00:40:03 orion7 FaxSend[1752]: --> [5:ERROR] Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FSPL=?\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [3:0,1] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FTBC=0\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FBOR=0\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [13:AT+FPHCTO=30\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM ROCKWELL AC/K56/V2.077-V90_2M_DLS Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [5:ATM0\r] Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK] Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM input buffering disabled Jan 30 00:40:04 orion7 FaxSend[1752]: SEND FAX: JOB 7 DEST 0109809519522222 COMM ID 00000029 Jan 30 00:40:11 orion7 kernel: lp1 out of paper Jan 30 00:40:31 orion7 last message repeated 2 times Jan 30 00:40:32 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing number in job request Jan 30 00:40:41 orion7 kernel: lp1 out of paper Jan 30 00:40:51 orion7 kernel: lp1 out of paper Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222 pri 127 tts 0:00 killtime 2:58:02): CMD DONE: exit status 0 Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (sleeping dest +49109809519522222 p ri 126 tts 0:00 killtime 2:58:02): SEND INCOMPLETE: requeue for 4:59; No respons e to EOP repeated 3 times Jan 30 00:40:54 orion7 FaxQueuer[156]: NOTIFY: bin/notify "sendq/q7" "requeued" "" "00:45" Jan 30 00:40:57 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing number in job request Jan 30 00:41:00 orion7 FaxGetty[170]: MODEM set DTR OFF Jan 30 00:41:00 orion7 FaxGetty[170]: DELAY 2600 ms Jan 30 00:41:01 orion7 kernel: lp1 out of paper Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set DTR ON Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set baud rate: 38400 baud, input flo w RTS/CTS, output flow RTS/CTS Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM flush i/o Jan 30 00:41:02 orion7 FaxGetty[170]: <-- [15:ATE0V1Q0S0=0H0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [9:0,1,2,1.0] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMFR?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [20:ROCKWELL ] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMDL?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [13:AC/K56^I^I ] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FREV?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [17:V2.077-V90_2M_DLS] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FDCC=?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7 )] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCQ=?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [5:ERROR] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FSPL=?\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [3:0,1] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FTBC=0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FBOR=0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [13:AT+FPHCTO=30\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM ROCKWELL AC/K56/V2.077-V90_2M_DLS Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [5:ATM0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCR=1\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FLID="Orion 7"\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FAA=1+FCLASS=0\r] Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK] Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM input buffering disabled Jan 30 00:41:11 orion7 kernel: lp1 out of paper Jan 30 00:41:14 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing number in job request ---------------------------------------------------------------------------- >>> MODEM CONFIGURATION <<< *************************** CountryCode: 49 AreaCode: 911 FAXNumber: +49.911.731851 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: "etc/dialrules" ServerTracing: 527 SessionTracing: 527 RecvFileMode: 0644 LogFileMode: 0600 DeviceMode: 0666 RingsBeforeAnswer: 4 SpeakerVolume: off GettyArgs: "-r -b -s %s %l" LocalIdentifier: "Orion 7" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%p of %%t" MaxRecvPages: 25 # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class2 # use class 2 interface ModemRate: 38400 ModemFlowControl: rtscts # default # #ModemResetCmds: AT&F2 # what you want for a Supra ModemNoFlowCmd: AT&K # disable flow control cmd ModemHardFlowCmd: AT&K3 # hardware flow control cmd ModemSoftFlowCmd: AT&K4 # software flow control cmd ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset #ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this ModemSetupDCDCmd: AT&C1 # DCD follows carrier ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class # ModemSendFillOrder: LSB2MSB # as expected ModemRecvFillOrder: MSB2LSB # opposite of what makes sense # ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive # # Caller ID configuration setup for Supra. # #QualifyCID: etc/cid # CID access control list file #CIDNumber: "NMBR = " # pattern string for phone number info #CIDName: "NAME = " # pattern string for identity info -- --------------------------------------------------------------------- The manual said the software required Windows 95 or better, so I installed Linux. >>> comet.friend@gmx.net <<< ---------------------------------------------------------------------
- Prev by Date: Y2K question
- Next by Date: Re: Hylafax does not compile on RedHat Linux 5.1 ????
- Prev by thread: Y2K question
- Next by thread: Problem with sending multiple pages with sendfax-cmd
- Index(es):
Project hosted by iFAX Solutions