Re: flexfax: Questions or Error Code

[Jacky Hui Chun Kit <ckhui@school.net.hk>]

Dear ,

    Thanks for your response, actually, I can send fax to some machine but not
most. I am guessing whether this is a modem/flow control problem or
modem <- > fax machine problem.
    My OS is Redhat 5.1, hylafax-4.0pl2 from hylafax-4.0pl2-3rh5.i386.rpm,
modem is Hayes ACCURA 56K + FAX flash rom upgraded to V.90.
    Thanks.  I really hope to solve the problem....
    Besides, are there any other WIN32 client for hylafax other than whfc?
    Merry Christmas and Happy New Year.


Best Rgds,
Jacky Hui

Attached are one of the trace

    ---- Transcript of session follows ----

Dec 22 13:23:12.65: [ 7221]: SESSION BEGIN 00000036 85223496359
Dec 22 13:23:12.66: [ 7221]: SEND FAX: JOB 51 DEST 23496359 COMMID 00000036
Dec 22 13:23:12.66: [ 7221]: DELAY 2600 ms
Dec 22 13:23:15.27: [ 7221]: <-- [15:ATE0V1Q0S0=0H0\r]
Dec 22 13:23:15.29: [ 7221]: --> [2:OK]
Dec 22 13:23:15.29: [ 7221]: <-- [12:ATS8=2S7=60\r]
Dec 22 13:23:15.31: [ 7221]: --> [2:OK]
Dec 22 13:23:15.31: [ 7221]: <-- [12:AT+FCLASS=1\r]
Dec 22 13:23:15.33: [ 7221]: --> [2:OK]
Dec 22 13:23:15.33: [ 7221]: <-- [5:ATM0\r]
Dec 22 13:23:15.34: [ 7221]: --> [2:OK]
Dec 22 13:23:15.34: [ 7221]: <-- [12:AT+FCLASS=1\r]
Dec 22 13:23:15.46: [ 7221]: --> [2:OK]
Dec 22 13:23:15.47: [ 7221]: DIAL 23496359
Dec 22 13:23:15.47: [ 7221]: <-- [13:ATDT23496359\r]
Dec 22 13:23:28.68: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:29.93: [ 7221]: --> [2:OK]
Dec 22 13:23:29.93: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:23:29.95: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:30.65: [ 7221]: --> [2:OK]
Dec 22 13:23:30.65: [ 7221]: REMOTE CSI "+852 2349 6359"
Dec 22 13:23:30.65: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:23:30.67: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:30.90: [ 7221]: --> [2:OK]
Dec 22 13:23:30.90: [ 7221]: REMOTE best rate 9600 bit/s
Dec 22 13:23:30.90: [ 7221]: REMOTE max page width 1728 pixels in 215 mm
Dec 22 13:23:30.90: [ 7221]: REMOTE max unlimited page length
Dec 22 13:23:30.90: [ 7221]: REMOTE best vres 7.7 line/mm
Dec 22 13:23:30.90: [ 7221]: REMOTE best format 2-D MR
Dec 22 13:23:30.90: [ 7221]: REMOTE supports T.30 Annex A, ECM
Dec 22 13:23:30.90: [ 7221]: REMOTE best 20 ms, 10 ms/scanline
Dec 22 13:23:30.90: [ 7221]: USE 9600 bit/s
Dec 22 13:23:30.90: [ 7221]: USE 20 ms, 10 ms/scanline
Dec 22 13:23:30.90: [ 7221]: SEND file "docq/doc61.ps;31"
Dec 22 13:23:30.90: [ 7221]: USE page width 1728 pixels in 215 mm
Dec 22 13:23:30.90: [ 7221]: USE unlimited page length
Dec 22 13:23:30.90: [ 7221]: USE 7.7 line/mm
Dec 22 13:23:30.90: [ 7221]: USE 1-D MR
Dec 22 13:23:30.90: [ 7221]: SEND training at v.29 9600 bit/s
Dec 22 13:23:30.90: [ 7221]: <-- [9:AT+FTH=3\r]
Dec 22 13:23:30.95: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:32.74: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:33.18: [ 7221]: --> [2:OK]
Dec 22 13:23:33.18: [ 7221]: DELAY 75 ms
Dec 22 13:23:33.27: [ 7221]: <-- [10:AT+FTM=96\r]
Dec 22 13:23:33.33: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:35.29: [ 7221]: --> [2:OK]
Dec 22 13:23:35.29: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:23:36.16: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:37.06: [ 7221]: --> [2:OK]
Dec 22 13:23:37.06: [ 7221]: TRAINING succeeded
Dec 22 13:23:37.06: [ 7221]: <-- [10:AT+FTM=96\r]
Dec 22 13:23:37.12: [ 7221]: --> [7:CONNECT]
Dec 22 13:23:37.12: [ 7221]: SEND begin page
Dec 22 13:23:49.11: [ 7221]: SENT 25782 bytes of data
Dec 22 13:24:03.08: [ 7221]: SENT 25861 bytes of data
Dec 22 13:24:09.07: [ 7221]: SENT 11120 bytes of data
Dec 22 13:24:09.07: [ 7221]: SEND 1D RTC
Dec 22 13:24:09.07: [ 7221]: SEND end page
Dec 22 13:24:20.14: [ 7221]: --> [2:]
Dec 22 13:24:20.14: [ 7221]: --> [2:OK]
Dec 22 13:24:20.14: [ 7221]: DELAY 75 ms
Dec 22 13:24:20.23: [ 7221]: SEND send MPS (more pages, same document)
Dec 22 13:24:20.23: [ 7221]: <-- [9:AT+FTH=3\r]
Dec 22 13:24:20.28: [ 7221]: --> [7:CONNECT]
Dec 22 13:24:21.59: [ 7221]: --> [2:OK]
Dec 22 13:24:21.59: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:24:24.69: [ 7221]: --> [0:]
Dec 22 13:24:24.69: [ 7221]: MODEM <Empty line>
Dec 22 13:24:24.75: [ 7221]: --> [2:OK]
Dec 22 13:24:24.75: [ 7221]: SEND send MPS (more pages, same document)
Dec 22 13:24:24.75: [ 7221]: <-- [9:AT+FTH=3\r]
Dec 22 13:24:24.81: [ 7221]: --> [7:CONNECT]
Dec 22 13:24:26.13: [ 7221]: --> [2:OK]
Dec 22 13:24:26.13: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:24:29.23: [ 7221]: --> [0:]
Dec 22 13:24:29.23: [ 7221]: MODEM <Empty line>
Dec 22 13:24:29.29: [ 7221]: --> [2:OK]
Dec 22 13:24:29.29: [ 7221]: SEND send MPS (more pages, same document)
Dec 22 13:24:29.29: [ 7221]: <-- [9:AT+FTH=3\r]
Dec 22 13:24:29.35: [ 7221]: --> [7:CONNECT]
Dec 22 13:24:30.65: [ 7221]: --> [2:OK]
Dec 22 13:24:30.65: [ 7221]: <-- [9:AT+FRH=3\r]
Dec 22 13:24:33.75: [ 7221]: --> [0:]
Dec 22 13:24:33.75: [ 7221]: MODEM <Empty line>
Dec 22 13:24:33.81: [ 7221]: --> [2:OK]
Dec 22 13:24:33.81: [ 7221]: <-- [9:AT+FTH=3\r]
Dec 22 13:24:33.86: [ 7221]: --> [7:CONNECT]
Dec 22 13:24:35.17: [ 7221]: --> [2:OK]
Dec 22 13:24:35.17: [ 7221]: <-- [5:ATH0\r]
Dec 22 13:24:35.88: [ 7221]: --> [2:OK]
Dec 22 13:24:35.88: [ 7221]: SESSION END

To: ckhui@linux1.sch  Date: 12/22/98 13:27
Error: No response to MPS or EOP repeated 3 tries




David Woolley wrote:

> > Dear Sir,
>
> To avoid confusion, this is a mutual support group, not a support company.
>
> >     I ahve encounter a error "No Response to MPS or EOP" when I send a
> > two files fax using "sendfax -n -d telno. file1.ps file2.ps" , I want to
> > know what should I do? Anyone encounter this and what does it mean?
>
> The modem did not respond when Hylafax signalled end of page.  In default
> of adequate information, check your flow control, but really we
> need modem, operating system and Hylafax versions, any manual configuration
> changes and a detailed session log.