flexfax: Zyxel 2864I

[HF <hylafax@astra.sif.it>]

I have just upgraded to the latest development firmware from zyxel on my
2864i.(Version 2.99i)
Hylafax works better in transmit and receive mode.
Take a look at point 4.18 that is a specific fix for hylafax.

Alex





4. Fax/Modem related bugs fixed:
 ================================
 4.1  The modem can only connect into 4800 bps with USR Sposter if FRN is
      initiated in the first 10 seconds.
 4.2  When "+FZF=1" is set, the modem will disconnect data call after a
      fax call if no printer is connected.
 4.3  The response of Rx Level of internal modem is incorrect.
 4.4  The CONNECT message format is incorrect (CR,LF missed) when
"+FAA=1",
      "+FClass=2.0" is entered.
 4.5  Fix incompatibility problem when calling to Rockwell modems.
 4.6  The modem will not start FRN again in V.32 mode if it happened
before.
 4.7  Fix V.8 incompatibility problem with Motorola modems.
 4.8  Fix incompatibility problem with NEC or Dynalink 56k modem when ZyXEL
      modem is in the answer site.
 4.9  Fix bug: The "Chars Received" of command ati1 is always 0.
 4.10 AT commands
      ATZ4S0M0N0=1 should be responded with ERROR
      ATSr=n : when n > 255 should be responded with ERROR
      'ATMOLO'='ATDL'
      'ATO26'='ATD26'
      AT#REV=? will not respond with ERROR
      AT#CLS=? will not respond with ERROR
 4.11 Fix Bug: Some data will be lost during file transfer in XON/XOFF
      software flow control.
 4.12 The modem will hang up or retrain continuously after a period of
time
      when connect to K.56flex server site.
 4.13 Fix the incompatibility problem with V.90 protocol.
 4.14 The connect speed is not correct for "AT+FDCC=1,2" or "AT+FDCC=1,4".
 4.15 In fax mode, the modem should not report "CONNECT FAX" to DTE if
      S38.3=1 since this will cause some software to assume a data call.
 4.16 In standalone fax mode, the incoming call will detect "busy" during
FAX
      printing from DRAM.
 4.17 The double quote ("string") is missed out in command response of
+FTSI,
      +FCSI commands.
 4.18 The modem will send the first page three times and then drop it when
      using Unix fax software "HylaFax".