flexfax: Rockwell internal modem

[BROUX <broux-werken@skynet.be>]

Hi, 

I'm using HylaFax 4.0pl2 op Linux Redhat 5.1 box.

I have an internal modem which got detected  as a Rockwell modem during FAXADDMODEM using class 2.
So i'm using the standard config.device file for this modem that came with the installation.

This works perfectly well when sending faxes but when receiving I only get the first 4 cms.
Has anybody been able to solve this??

My log file (for incomming fax)
This was a complete A4 page that whas sent. Only a couple of lines where received.

Nov 28 13:54:13.60: [  430]: SESSION BEGIN 00000046 3289413304
Nov 28 13:54:13.61: [  430]: <-- [4:ATA\r]
Nov 28 13:54:15.05: [  430]: --> [3:FAX]
Nov 28 13:54:15.06: [  430]: ANSWER: FAX CONNECTION
Nov 28 13:54:15.07: [  430]: RECV FAX: begin
Nov 28 13:54:20.99: [  430]: --> [5:+FCON]
Nov 28 13:54:22.62: [  430]: --> [29:+FTSI: "        089 50 36 70"]
Nov 28 13:54:22.63: [  430]: REMOTE TSI "089 50 36 70"
Nov 28 13:54:23.04: [  430]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
Nov 28 13:54:23.05: [  430]: REMOTE wants 9600 bit/s
Nov 28 13:54:23.05: [  430]: REMOTE wants page width 1728 pixels in 215 mm
Nov 28 13:54:23.06: [  430]: REMOTE wants unlimited page length 
Nov 28 13:54:23.06: [  430]: REMOTE wants 3.85 line/mm
Nov 28 13:54:23.06: [  430]: REMOTE wants 1-D MR
Nov 28 13:54:23.07: [  430]: --> [2:OK]
Nov 28 13:54:23.08: [  430]: <-- [7:AT+FDR\r]
Nov 28 13:54:24.70: [  430]: --> [5:+FCFR]
Nov 28 13:54:26.60: [  430]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
Nov 28 13:54:26.61: [  430]: REMOTE wants 9600 bit/s
Nov 28 13:54:26.61: [  430]: REMOTE wants page width 1728 pixels in 215 mm
Nov 28 13:54:26.62: [  430]: REMOTE wants unlimited page length 
Nov 28 13:54:26.62: [  430]: REMOTE wants 3.85 line/mm
Nov 28 13:54:26.62: [  430]: REMOTE wants 1-D MR
Nov 28 13:54:26.63: [  430]: --> [7:CONNECT]
Nov 28 13:54:26.63: [  430]: RECV: begin page
Nov 28 13:54:26.64: [  430]: RECV: send trigger 021
Nov 28 13:54:26.64: [  430]: <-- data [1]
Nov 28 13:55:04.13: [  430]: RECV: 65 total lines, 0 bad lines, 0 consecutive bad lines
Nov 28 13:55:04.19: [  430]: --> [17:+FPTS: 1,2219,0,0]
Nov 28 13:55:04.68: [  430]: --> [7:+FET: 2]
Nov 28 13:55:04.69: [  430]: RECV recv EOP (no more pages or documents)
Nov 28 13:55:04.69: [  430]: --> [2:OK]
Nov 28 13:55:04.70: [  430]: RECV send MCF (message confirmation)
Nov 28 13:55:04.73: [  430]: RECV FAX (00000046): from 089 50 36 70, page 1 in 0:41, INF, 3.85 line/mm, 1-D MR
Nov 28 13:55:04.75: [  430]: RECV FAX (00000046): recvq/fax00015.tif from 089 50 36 70, route to <unspecified>, 1 pages in 0:49
Nov 28 13:55:04.76: [  430]: <-- [7:AT+FDR\r]
Nov 28 13:55:07.69: [  430]: --> [8:+FHNG: 0]
Nov 28 13:55:07.70: [  430]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Nov 28 13:55:07.72: [  430]: RECV FAX: bin/faxrcvd "recvq/fax00015.tif" "cua3" "00000046" ""
Nov 28 13:55:13.93: [  430]: RECV FAX: end
Nov 28 13:55:13.94: [  430]: SESSION END


Steven Cruysberghs