flexfax: Still problems receiving facsimilie....

[Philipp Steinkrueger <philipp@oberberg-online.de>]

I was asked to send some logfiles, here is what i found:

/var/log/hylafax/hylafax.log:

Nov 26 16:43:24 www2 FaxGetty[7041]: ANSWER: FAX CONNECTION
Nov 26 16:45:37 www2 FaxGetty[7041]: RECV FAX (00000162): from , page 1
in 2:11, INF, 7.7 line/mm, 2-D MR
Nov 26 16:45:37 www2 FaxGetty[7041]: RECV FAX (00000162):
recvq/fax00016.tif from , route to <unspecified>, 1 pages in 2:13
Nov 26 16:45:40 www2 FaxGetty[7041]: RECV FAX: bin/faxrcvd
"recvq/fax00016.tif" "ttyS0" "00000162" ""

/var/spool/fax/log/c00000161:

Nov 26 15:38:06.44: [ 7041]: SESSION BEGIN 00000161 49
Nov 26 15:38:06.45: [ 7041]: <-- [4:ATA\r]
Nov 26 15:38:14.45: [ 7041]: --> [5:+FCON]
Nov 26 15:38:14.45: [ 7041]: ANSWER: FAX CONNECTION
Nov 26 15:38:14.45: [ 7041]: RECV FAX: begin
Nov 26 15:38:16.08: [ 7041]: --> [29:+FTSI: "                    "]
Nov 26 15:38:16.08: [ 7041]: REMOTE TSI ""
Nov 26 15:38:16.42: [ 7041]: --> [22:+FDCS: 1,3,0,2,1,0,0,1]
Nov 26 15:38:16.42: [ 7041]: REMOTE wants 9600 bit/s
Nov 26 15:38:16.42: [ 7041]: REMOTE wants page width 1728 pixels in 215
mm
Nov 26 15:38:16.42: [ 7041]: REMOTE wants unlimited page length 
Nov 26 15:38:16.42: [ 7041]: REMOTE wants 7.7 line/mm
Nov 26 15:38:16.42: [ 7041]: REMOTE wants 2-D MR
Nov 26 15:38:16.53: [ 7041]: --> [2:OK]
Nov 26 15:38:16.53: [ 7041]: <-- [7:AT+FDR\r]
Nov 26 15:38:18.12: [ 7041]: --> [5:+FCFR]
Nov 26 15:38:20.39: [ 7041]: --> [22:+FDCS: 1,3,0,2,1,0,0,1]
Nov 26 15:38:20.39: [ 7041]: REMOTE wants 9600 bit/s
Nov 26 15:38:20.39: [ 7041]: REMOTE wants page width 1728 pixels in 215
mm
Nov 26 15:38:20.39: [ 7041]: REMOTE wants unlimited page length 
Nov 26 15:38:20.39: [ 7041]: REMOTE wants 7.7 line/mm
Nov 26 15:38:20.39: [ 7041]: REMOTE wants 2-D MR
Nov 26 15:38:20.39: [ 7041]: --> [7:CONNECT]
Nov 26 15:38:20.39: [ 7041]: RECV: begin page
Nov 26 15:38:20.39: [ 7041]: RECV: send trigger 022
Nov 26 15:38:20.39: [ 7041]: <-- data [1]
Nov 26 15:38:29.46: [ 7041]: RECV: 2273 total lines, 0 bad lines, 0
consecutive bad lines
Nov 26 15:38:29.46: [ 7041]: --> [17:+FPTS: 2,2219,0,0]
Nov 26 15:38:30.72: [ 7041]: --> [7:+FET: 2]
Nov 26 15:38:30.72: [ 7041]: RECV recv EOP (no more pages or documents)
Nov 26 15:38:30.83: [ 7041]: --> [2:OK]
Nov 26 15:38:30.83: [ 7041]: RECV send MCF (message confirmation)
Nov 26 15:38:30.83: [ 7041]: RECV FAX (00000161): from , page 1 in 0:14,
INF, 7.7 line/mm, 2-D MR
Nov 26 15:38:30.83: [ 7041]: RECV FAX (00000161): recvq/fax00015.tif
from , route to <unspecified>, 1 pages in 0:16
Nov 26 15:38:30.83: [ 7041]: <-- [7:AT+FDR\r]
Nov 26 15:38:33.57: [ 7041]: --> [8:+FHNG: 0]
Nov 26 15:38:33.57: [ 7041]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Nov 26 15:38:33.57: [ 7041]: RECV FAX: bin/faxrcvd "recvq/fax00015.tif"
"ttyS0" "00000161" ""
Nov 26 15:38:33.98: [ 7041]: RECV FAX: end
Nov 26 15:38:33.98: [ 7041]: SESSION END


Here is what Hylafax thinks about my Modem: MODEM ROCKWELL
AC/V34/V1.510-V34_DS

If you need more, just tell me where to find...


-- 
Philipp Steinkr�ger

Oberberg-Online Informations Systeme
Email: steinkrueger@oberberg-online.de