HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Continually sending the same page?



Hi
    I am running Hylafax v4.0pl2 under FreeBSD 2.2.6-RELEASE with gcc
2.7.1 .
    Modem is GVC SF-1156 V/R1 with Class 1 facsimile support.
My problem is when sending a postscript or tiff file, the destination
fax machine will
repeatly print out the first page..What will the problem be?
    Thank for your help!!
                                                                Chang
Chi Kuang

follow is part of the log file
---------------------------------------------------
Nov 23 12:48:48.48: [ 2541]: SESSION BEGIN 00000062 88652720859
Nov 23 12:48:48.48: [ 2541]: SEND FAX: JOB 23 DEST 2720859 COMMID
00000062
Nov 23 12:48:48.48: [ 2541]: DELAY 2600 ms
Nov 23 12:48:51.08: [ 2541]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 23 12:48:51.10: [ 2541]: --> [2:OK]
Nov 23 12:48:51.10: [ 2541]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Nov 23 12:48:51.12: [ 2541]: --> [2:OK]
Nov 23 12:48:51.12: [ 2541]: <-- [12:AT+FCLASS=1\r]
Nov 23 12:48:51.14: [ 2541]: --> [2:OK]
Nov 23 12:48:51.14: [ 2541]: <-- [7:ATL0M1\r]
Nov 23 12:48:51.15: [ 2541]: --> [2:OK]
Nov 23 12:48:51.15: [ 2541]: <-- [12:AT+FCLASS=1\r]
Nov 23 12:48:51.27: [ 2541]: --> [2:OK]
Nov 23 12:48:51.27: [ 2541]: DIAL 2720859
Nov 23 12:48:51.27: [ 2541]: <-- [13:ATDT2720859@\r]
Nov 23 12:49:05.61: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:06.80: [ 2541]: --> [2:OK]
Nov 23 12:49:06.80: [ 2541]: <-- [9:AT+FRH=3\r]
Nov 23 12:49:06.82: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:07.25: [ 2541]: --> [2:OK]
Nov 23 12:49:07.25: [ 2541]: <-- [9:AT+FRH=3\r]
Nov 23 12:49:07.27: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:07.57: [ 2541]: --> [2:OK]
Nov 23 12:49:07.57: [ 2541]: REMOTE best rate 14400 bit/s
Nov 23 12:49:07.57: [ 2541]: REMOTE max page width 1728 pixels in 215 mm

Nov 23 12:49:07.57: [ 2541]: REMOTE max unlimited page length
Nov 23 12:49:07.57: [ 2541]: REMOTE best vres 7.7 line/mm
Nov 23 12:49:07.57: [ 2541]: REMOTE best format 2-D MMR
Nov 23 12:49:07.57: [ 2541]: REMOTE supports T.30 Annex A, ECM
Nov 23 12:49:07.57: [ 2541]: REMOTE best 10 ms, 5 ms/scanline
Nov 23 12:49:07.57: [ 2541]: USE 14400 bit/s
Nov 23 12:49:07.57: [ 2541]: USE 10 ms, 5 ms/scanline
Nov 23 12:49:07.57: [ 2541]: SEND file "docq/doc29.tif;40"
Nov 23 12:49:07.57: [ 2541]: USE page width 1728 pixels in 215 mm
Nov 23 12:49:07.57: [ 2541]: USE unlimited page length
Nov 23 12:49:07.57: [ 2541]: USE 3.85 line/mm
Nov 23 12:49:07.57: [ 2541]: USE 2-D MR
Nov 23 12:49:07.57: [ 2541]: SEND training at v.17 14400 bit/s
Nov 23 12:49:07.57: [ 2541]: <-- [9:AT+FTH=3\r]
Nov 23 12:49:07.63: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:07.63: [ 2541]: <-- data [23]
Nov 23 12:49:07.63: [ 2541]: <-- data [2]
Nov 23 12:49:09.41: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:09.41: [ 2541]: <-- data [6]
Nov 23 12:49:09.41: [ 2541]: <-- data [2]
Nov 23 12:49:09.85: [ 2541]: --> [2:OK]
Nov 23 12:49:09.85: [ 2541]: DELAY 75 ms
Nov 23 12:49:09.94: [ 2541]: <-- [11:AT+FTM=145\r]
Nov 23 12:49:09.98: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:09.98: [ 2541]: <-- data [1024]
Nov 23 12:49:09.98: [ 2541]: <-- data [1024]
Nov 23 12:49:09.98: [ 2541]: <-- data [652]
Nov 23 12:49:12.05: [ 2541]: <-- data [2]
Nov 23 12:49:13.09: [ 2541]: --> [2:OK]
Nov 23 12:49:13.09: [ 2541]: <-- [9:AT+FRH=3\r]
Nov 23 12:49:13.86: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:14.67: [ 2541]: --> [2:OK]
Nov 23 12:49:14.67: [ 2541]: TRAINING succeeded
Nov 23 12:49:14.67: [ 2541]: <-- [11:AT+FTM=146\r]
Nov 23 12:49:14.71: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:14.71: [ 2541]: SEND begin page
Nov 23 12:49:14.71: [ 2541]: <-- data [1026]
Nov 23 12:49:14.71: [ 2541]: <-- data [1024]
Nov 23 12:49:14.71: [ 2541]: <-- data [1024]
Nov 23 12:49:15.61: [ 2541]: <-- data [1024]
Nov 23 12:49:15.61: [ 2541]: <-- data [1024]
Nov 23 12:49:16.67: [ 2541]: <-- data [1024]
Nov 23 12:49:16.67: [ 2541]: <-- data [1024]
Nov 23 12:49:17.74: [ 2541]: <-- data [1024]
Nov 23 12:49:17.74: [ 2541]: <-- data [1024]
Nov 23 12:49:18.80: [ 2541]: <-- data [1024]
Nov 23 12:49:18.80: [ 2541]: <-- data [1039]
Nov 23 12:49:19.87: [ 2541]: <-- data [1033]
Nov 23 12:49:19.87: [ 2541]: <-- data [1035]
Nov 23 12:49:21.17: [ 2541]: <-- data [1028]
Nov 23 12:49:21.17: [ 2541]: <-- data [1031]
Nov 23 12:49:22.23: [ 2541]: <-- data [1037]
Nov 23 12:49:22.23: [ 2541]: <-- data [1027]
Nov 23 12:49:23.30: [ 2541]: <-- data [1026]
Nov 23 12:49:23.30: [ 2541]: <-- data [1033]
Nov 23 12:49:24.59: [ 2541]: <-- data [1029]
Nov 23 12:49:24.59: [ 2541]: <-- data [141]
Nov 23 12:49:24.59: [ 2541]: SENT 20621 bytes of data
Nov 23 12:49:24.59: [ 2541]: <-- data [1027]
Nov 23 12:49:25.66: [ 2541]: <-- data [1024]
Nov 23 12:49:25.66: [ 2541]: <-- data [1029]
Nov 23 12:49:26.72: [ 2541]: <-- data [838]
Nov 23 12:49:26.72: [ 2541]: SENT 3905 bytes of data
Nov 23 12:49:26.72: [ 2541]: SEND 2D RTC
Nov 23 12:49:26.72: [ 2541]: <-- data [30]
Nov 23 12:49:26.72: [ 2541]: <-- data [2]
Nov 23 12:49:26.72: [ 2541]: SEND end page
Nov 23 12:49:28.70: [ 2541]: --> [2:OK]
Nov 23 12:49:28.70: [ 2541]: DELAY 95 ms
Nov 23 12:49:28.81: [ 2541]: SEND send EOP (no more pages or documents)
Nov 23 12:49:28.81: [ 2541]: <-- [9:AT+FTH=3\r]
Nov 23 12:49:28.86: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:28.86: [ 2541]: <-- data [3]
Nov 23 12:49:28.86: [ 2541]: <-- data [2]
Nov 23 12:49:30.18: [ 2541]: --> [2:OK]
Nov 23 12:49:30.18: [ 2541]: <-- [9:AT+FRH=3\r]
Nov 23 12:49:30.71: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:31.50: [ 2541]: --> [2:OK]
Nov 23 12:49:31.50: [ 2541]: SEND recv RTN (retrain negative)
Nov 23 12:49:31.50: [ 2541]: SEND training at v.17 14400 bit/s
Nov 23 12:49:31.50: [ 2541]: <-- [9:AT+FTH=3\r]
Nov 23 12:49:31.55: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:31.55: [ 2541]: <-- data [23]
Nov 23 12:49:31.55: [ 2541]: <-- data [2]
Nov 23 12:49:33.34: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:33.34: [ 2541]: <-- data [6]
Nov 23 12:49:33.34: [ 2541]: <-- data [2]
Nov 23 12:49:33.77: [ 2541]: --> [2:OK]
Nov 23 12:49:33.77: [ 2541]: DELAY 75 ms
Nov 23 12:49:33.86: [ 2541]: <-- [11:AT+FTM=145\r]
Nov 23 12:49:33.90: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:33.90: [ 2541]: <-- data [1024]
Nov 23 12:49:33.90: [ 2541]: <-- data [1024]
Nov 23 12:49:33.90: [ 2541]: <-- data [652]
Nov 23 12:49:35.97: [ 2541]: <-- data [2]
Nov 23 12:49:37.01: [ 2541]: --> [2:OK]
Nov 23 12:49:37.01: [ 2541]: <-- [9:AT+FRH=3\r]
Nov 23 12:49:37.55: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:38.39: [ 2541]: --> [2:OK]
Nov 23 12:49:38.39: [ 2541]: TRAINING succeeded
Nov 23 12:49:38.39: [ 2541]: <-- [11:AT+FTM=146\r]
Nov 23 12:49:38.43: [ 2541]: --> [7:CONNECT]
Nov 23 12:49:38.43: [ 2541]: SEND begin page
Nov 23 12:49:38.43: [ 2541]: <-- data [1026]
... then looping above procedure




Project hosted by iFAX Solutions