HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: "cannot open user access file /etc/hosts"



-----BEGIN PGP SIGNED MESSAGE-----

On Thu, 12 Nov 1998, [ISO-8859-1] Schütz Susanne Dipl.Ing. wrote:

> I installed the hylafax package, ran faxsetup and faxaddmodem.

I hope this was a recent 4.0pl2 package?

> Then, if I calles faxstat, the reply was:
> 
> Login failed: 550 Cannot set privileges.
> 
> The owner of the file /etc/hosts in /var/spool/fax was uucp, so I
> changed it to fax. The mode of the file is 600. Now I get the message

uucp should be the same UID as fax. If it's not, something else is
going on.

> Login failed: 530 User root access denied.
> 
> In /var/spool/messages there appear the lines:
> 
> Unable to open the user access file /etc/hosts: Permission denied
> HylaFAX LOGIN REFUSED (user denied) FROM localhost [127.0.0.1], root
> 
> If I try to set the mode of /var/spool/fax/etc/hosts to 666, then the
> server refuses, because the mode isn´t 600. SO I think, the server
> uses the right file.  I didn´t change anything in the config-files.

600 is correct. Check the contents of the file.

			Nico Kadel-Garcia
			Senior Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNksV2j/+ItycgIJRAQFBDQP9E+maAkB/YuUZyZjNC0H6lPCAARf1K6tq
KdTj2NeZ/qyhLNB81ef78ZhUlROa+bJKBKqD+tzhbzQJpSc5JlBPU6l+vk5BQdam
54Rp+pQ949Slo4qQGPk9DE9K+5prZCApjuVp9V6cZwLNnoARiz8sPuzXuQ38SP6A
se5cQfl1+b4=
=cr6e
-----END PGP SIGNATURE-----




Project hosted by iFAX Solutions