HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: getty hanging up line



> control.  To then test the installation, I ran faxmodem to manually
> assign cua1 as an available modem.  I was able to send a test postscript

cua1 will soon be removed from Linux.

> type of call (fax or data) each time.  The fax receive started to work
> until encountering some phase B errors (not sure what all that is but am

Phase B is the phase in which the two fax machines negotiate the options
and parameters to use.  Probably 50% of failures are in this phase, so
Phase B error is of little diagnostic value with the underlying error.

> Nov 03 21:59:47.59 [ 9297]: GETTY: START "/sbin/getty -h ttyS1 19200",

What does -h do on the getty you are using?




Project hosted by iFAX Solutions