HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: faxgetty: "not a valid tty"



Hi Barry,

I am not an expect on SCO - its been a long time :-)

However I seem to remember the command "enable" is a bit of a hack. It
is probably digging around in inittab looking for a standard getty
entry. Not finding it, it comes up with this message. Your best bet is
to edit /etc/inittab directly - change the "off" to "respawn" and then
run "telinit -q" to get init to re-read it.

Damian

Barry Wiseman wrote:
> 
> System is SCO Open Server Enterprise 5.0.4.
> HylaFAX is v4.0pl2.
> 
> The command,
> 
>         faxgetty -D ttybF
> 
> works fine.  However, I cannot spawn faxgetty from inittab.
> 
> # l /dev/ttybF
> crw-------   1 uucp     terminal 116,141 Nov  2 16:58 /dev/ttybF
> #
> # grep bF /etc/inittab
> bF:23:off:/usr/local/HylaFAX-v4.0/slib/faxgetty ttybF
> # l /usr/local/HylaFAX-v4.0/slib/faxgetty
> -rwxr-xr-x   1 root     sys
>         442444 Apr 19  1998 /usr/local/HylaFAX-v4.0/slib/faxgetty
> # enable ttybF
> enable: ttybF not enabled : not a valid tty
> #
> 
> -------------------------------------
> Barry Wiseman
> Genesis Software Designs, Inc.
> 18 E. 41 Street
> New York, NY 10017
> (212) 889-9191   Fax: (212) 889-1589
> -------------------------------------

-- 
 ______________________________________________________________________
* Damian Ivereigh     *      ||        ||      * Cisco Systems, Inc.   *
* MIS Printer Admin   *    .||||.    .||||.    * Sydney, Australia     *
* Linux Bigot         * ..:||||||:..:||||||:.. * +61 2 8448 7344       *
* damian@cisco.com    *   cisco Systems, Inc.  * Fax: +61 2 8448 7228  *
*______________________________________________________________________*




Project hosted by iFAX Solutions