Re: flexfax: Phase B Error

[Robert Colquhoun <rjc@trump.net.au>]

Hi,

At 10:06 AM 10/5/98 -0600, you wrote:
>Hello all,
>I use a Sporster 28.8 on Hylafax 4.0pl2 / BSDI 2.1 system,
>i obtained this error, that i dont know how resolve it
>T
>Thanks for help me.

>Oct 03 11:20:39.28: [17195]: <-- [15:AT+FNR=1,1,1,1\r]

In your modem config file change add this line:
AT+FNR=1,1,1,0

It will stop the modem reporting bad frames which is causing this:

>Oct 03 11:21:08.03: [17195]: --> [16:+FNF:µ+FCI:" 50]

The bad frame +FNF is being badly reported, it should not be on the same
line as the +FCI response which gives the remote fax no.


>Oct 03 11:21:08.03: [17195]: REMOTE NSF "µ+FCI:" 50"
>Oct 03 11:21:08.03: [17195]: --> [45: 2653107        
>"+FIS:1,5,2,2,0,0,0,0ÿÿÿÿÿÿÿ]

Hylafax gets confused

>Oct 03 11:21:48.03: [17195]: REMOTE HANGUP: Unspecified Transmit Phase B 
>error (code 20)
>Oct 03 11:21:48.03: [17195]: SEND FAILED: Unspecified Transmit Phase B error
>Oct 03 11:21:48.03: [17195]: <-- [5:ATH0\r]
>Oct 03 11:21:48.26: [17195]: --> [4:ATH0]
>Oct 03 11:21:48.26: [17195]: --> [2:OK]
>Oct 03 11:21:48.27: [17195]: SESSION END

..and gives up.

Note if the above doesn't work you might need to setup the modem as Class 1

- Robert