Re: flexfax: A question about hylafax

[Gerhard Hoelzle <gerhard_hoelzle@ep.mbag.sifi.daimlerbenz.com>]

natali giuliano (Diaolin) wrote:
> 
> how to avoid this problem:
> my line has no dialtone.
> How to say to hylafax to not search for a dialtone???????????
> Tx and by
> --
> Giuliano Natali, TreW s.r.l   Phone:+39 0461 751188   Home : 0461 594096

Hi Giuliano,
that's a pitfall I get trapped in everytime I set up a modem.
If you have a Hayes compatible modem, somewhere in the setup a X4
command is sent to the modem which - among other things - tells it to
wait for a dial tone. Try to locate it and change it to X3. With my USR
Sportster it's the following line when configuring it with faxaddmodem:

ModemResultCodesCmd:    ATQ0X4

This should read

ModemResultCodesCmd:    ATQ0X3

The default setting can be changed in the corresponding modem
description file in the config directory.

Hope that helps,
Gerhard

-- 
# Dr. Gerhard Hoelzle  # Tel.  : 07031/90-79671                #
# Daimler-Benz AG      # Fax   : 07031/90-3877                 #
# Abt. EP/QDF HPC G270 # Email : Gerhard_Hoelzle@ep.mbag.sifi. #
# 71059 Sindelfingen   #          daimlerbenz.com              #