flexfax: HylaFAX doesnt send

[Lder Sachse <lueder@gmx.net>]

Hi!

I have a HylaFAX 4.0pl1 server running on a Linux 2.0.33 box with a Hayes 14.4
Class1 modem. Receiving works fine but when I try to send something it doesn�t
work. It connects and two seconds later it disconnects without doing anything.
No error message and the Fax queue is empty.
Maybe you can help me. These are the log entries:

Sep 15 14:19:31.27: [ 4607]: SESSION BEGIN 00000061 49718121
Sep 15 14:19:31.27: [ 4607]: SEND FAX: JOB 32 DEST 21 COMMID 00000061
Sep 15 14:19:31.27: [ 4607]: DELAY 2600 ms
Sep 15 14:19:33.88: [ 4607]: <-- [17:ATX3E0V1Q0S0=0H0\r]
Sep 15 14:19:33.93: [ 4607]: --> [2:OK]
Sep 15 14:19:33.93: [ 4607]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Sep 15 14:19:33.95: [ 4607]: --> [2:OK]
Sep 15 14:19:33.95: [ 4607]: <-- [12:AT+FCLASS=1\r]
Sep 15 14:19:33.96: [ 4607]: --> [2:OK]
Sep 15 14:19:33.96: [ 4607]: <-- [9:AT+FAA=0\r]
Sep 15 14:19:33.97: [ 4607]: --> [2:OK]
Sep 15 14:19:33.97: [ 4607]: <-- [5:ATM0\r]
Sep 15 14:19:33.98: [ 4607]: --> [2:OK]
Sep 15 14:19:33.98: [ 4607]: <-- [12:AT+FCLASS=1\r]
Sep 15 14:19:34.09: [ 4607]: --> [2:OK]
Sep 15 14:19:34.18: [ 4607]: DIAL 21
Sep 15 14:19:34.18: [ 4607]: <-- [7:ATDT21\r]
Sep 15 14:19:47.71: [ 4607]: --> [7:CONNECT]
Sep 15 14:19:48.79: [ 4607]: --> [2:OK]
Sep 15 14:19:48.79: [ 4607]: <-- [9:AT+FRH=3\r]
Sep 15 14:19:48.80: [ 4607]: --> [7:CONNECT]
Sep 15 14:19:49.51: [ 4607]: --> [2:OK]
Sep 15 14:19:49.51: [ 4607]: REMOTE CSI "+49 7181 931588"
Sep 15 14:19:49.51: [ 4607]: <-- [9:AT+FRH=3\r]
Sep 15 14:19:49.52: [ 4607]: --> [7:CONNECT]
Sep 15 14:19:49.75: [ 4607]: --> [2:OK]
Sep 15 14:19:49.75: [ 4607]: REMOTE best rate 9600 bit/s
Sep 15 14:19:49.75: [ 4607]: REMOTE max page width 1728 pixels in 215 mm
Sep 15 14:19:49.75: [ 4607]: REMOTE max unlimited page length 
Sep 15 14:19:49.75: [ 4607]: REMOTE best vres 7.7 line/mm
Sep 15 14:19:49.75: [ 4607]: REMOTE best format 1-D MR
Sep 15 14:19:49.75: [ 4607]: REMOTE best 20 ms, 10 ms/scanline
Sep 15 14:19:49.75: [ 4607]: USE 9600 bit/s
Sep 15 14:19:49.75: [ 4607]: USE 20 ms, 10 ms/scanline
Sep 15 14:19:49.77: [ 4607]: <-- [9:AT+FTH=3\r]
Sep 15 14:19:49.83: [ 4607]: --> [7:CONNECT]
Sep 15 14:19:49.83: [ 4607]: <-- data [3]
Sep 15 14:19:49.83: [ 4607]: <-- data [2]
Sep 15 14:19:51.14: [ 4607]: --> [2:OK]
Sep 15 14:19:51.14: [ 4607]: <-- [5:ATH0\r]
Sep 15 14:19:52.33: [ 4607]: --> [2:OK]
Sep 15 14:19:52.33: [ 4607]: SESSION END

Any ideas?

Thanks in advance.

Lueder