 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Quitting Problem
- To: flexfax@sgi.com, guru@sisis.de, matthias.apitz@sisis.de
- Subject: flexfax: Quitting Problem
- From: Stephan Mankopf <stephan.mankopf@rokd.de>
- Reply-To: stephan.mankopf@rokd.de
- Date: Wed, 02 Sep 1998 15:08:47 +0200
Hi there from Germany, I use Hylafax on PC with S.u.S.E Linux 5.2 Kernel 2.0.33 with FaxDispatch (convert Fax to tiff->Postscript-> send it per Mail to xxx@xxx.xx) and when a FaxMaschine fax to my Modem (Creatix SG 2834) the Fax come in and recieved it in my mailbox but the Sender get an error like this: "The message don't send complete" Does anyone know which problem this could be (Modem, ISDN-Anlage [Nebenstelle], Software) ? Here the log-file of the last session: --- cut here --- Sep 02 14:51:46.59: [ 2256]: SESSION BEGIN 00000063 495211457476 Sep 02 14:51:46.59: [ 2256]: <-- [4:ATA\r] Sep 02 14:51:54.70: [ 2256]: --> [5:+FCON] Sep 02 14:51:54.70: [ 2256]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF Sep 02 14:51:54.70: [ 2256]: ANSWER: FAX CONNECTION Sep 02 14:51:54.70: [ 2256]: MODEM input buffering enabled Sep 02 14:51:54.70: [ 2256]: RECV FAX: begin Sep 02 14:51:56.30: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:51:56.30: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:51:56.68: [ 2256]: --> [22:+FDCS: 0,5,0,2,1,0,0,1] Sep 02 14:51:56.68: [ 2256]: REMOTE wants 14400 bit/s Sep 02 14:51:56.68: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:51:56.68: [ 2256]: REMOTE wants unlimited page length Sep 02 14:51:56.68: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:51:56.68: [ 2256]: REMOTE wants 2-D MR Sep 02 14:51:56.68: [ 2256]: --> [2:OK] Sep 02 14:51:56.68: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:51:59.64: [ 2256]: --> [5:+FCFR] Sep 02 14:52:01.76: [ 2256]: --> [22:+FDCS: 0,5,0,2,1,0,0,1] Sep 02 14:52:01.76: [ 2256]: REMOTE wants 14400 bit/s Sep 02 14:52:01.76: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:52:01.76: [ 2256]: REMOTE wants unlimited page length Sep 02 14:52:01.76: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:52:01.76: [ 2256]: REMOTE wants 2-D MR Sep 02 14:52:01.76: [ 2256]: --> [7:CONNECT] Sep 02 14:52:01.76: [ 2256]: RECV: begin page Sep 02 14:52:01.76: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:52:01.76: [ 2256]: RECV: send trigger 022 Sep 02 14:52:01.76: [ 2256]: <-- data [1] Sep 02 14:52:16.04: [ 2256]: RECV: 1137 total lines, 0 bad lines, 0 consecutive bad lines Sep 02 14:52:16.04: [ 2256]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Sep 02 14:52:16.15: [ 2256]: --> [17:+FPTS: 2,2219,0,0] Sep 02 14:52:17.39: [ 2256]: --> [7:+FET: 0] Sep 02 14:52:17.39: [ 2256]: RECV recv MPS (more pages, same document) Sep 02 14:52:17.50: [ 2256]: --> [2:OK] Sep 02 14:52:17.50: [ 2256]: RECV send MCF (message confirmation) Sep 02 14:52:17.50: [ 2256]: RECV FAX (00000063): from +49 4371 868642, page 1 in 0:21, INF, 3.85 line/mm, 2-D MR Sep 02 14:52:17.50: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:52:21.06: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:52:21.06: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:52:26.52: [ 2256]: --> [22:+FDCS: 0,4,0,2,1,0,0,1] Sep 02 14:52:26.52: [ 2256]: REMOTE wants 12000 bit/s Sep 02 14:52:26.52: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:52:26.52: [ 2256]: REMOTE wants unlimited page length Sep 02 14:52:26.52: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:52:26.52: [ 2256]: REMOTE wants 2-D MR Sep 02 14:52:26.52: [ 2256]: --> [7:CONNECT] Sep 02 14:52:26.52: [ 2256]: RECV: begin page Sep 02 14:52:26.52: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:52:26.52: [ 2256]: RECV: send trigger 022 Sep 02 14:52:26.52: [ 2256]: <-- data [1] Sep 02 14:52:43.37: [ 2256]: RECV: 1137 total lines, 0 bad lines, 0 consecutive bad lines Sep 02 14:52:43.37: [ 2256]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Sep 02 14:52:43.37: [ 2256]: --> [17:+FPTS: 2,2219,0,0] Sep 02 14:52:44.60: [ 2256]: --> [7:+FET: 0] Sep 02 14:52:44.60: [ 2256]: RECV recv MPS (more pages, same document) Sep 02 14:52:44.71: [ 2256]: --> [2:OK] Sep 02 14:52:44.71: [ 2256]: RECV send MCF (message confirmation) Sep 02 14:52:44.71: [ 2256]: RECV FAX (00000063): from +49 4371 868642, page 2 in 0:27, INF, 3.85 line/mm, 2-D MR Sep 02 14:52:44.71: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:52:48.27: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:52:48.27: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:52:53.72: [ 2256]: --> [22:+FDCS: 0,3,0,2,1,0,0,1] Sep 02 14:52:53.72: [ 2256]: REMOTE wants 9600 bit/s Sep 02 14:52:53.72: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:52:53.72: [ 2256]: REMOTE wants unlimited page length Sep 02 14:52:53.72: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:52:53.72: [ 2256]: REMOTE wants 2-D MR Sep 02 14:52:53.72: [ 2256]: --> [7:CONNECT] Sep 02 14:52:53.72: [ 2256]: RECV: begin page Sep 02 14:52:53.72: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:52:53.72: [ 2256]: RECV: send trigger 022 Sep 02 14:52:53.72: [ 2256]: <-- data [1] Sep 02 14:53:09.25: [ 2256]: RECV: 1137 total lines, 0 bad lines, 0 consecutive bad lines Sep 02 14:53:09.25: [ 2256]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Sep 02 14:53:09.25: [ 2256]: --> [17:+FPTS: 2,2219,0,0] Sep 02 14:53:10.59: [ 2256]: --> [7:+FET: 0] Sep 02 14:53:10.59: [ 2256]: RECV recv MPS (more pages, same document) Sep 02 14:53:10.70: [ 2256]: --> [2:OK] Sep 02 14:53:10.70: [ 2256]: RECV send MCF (message confirmation) Sep 02 14:53:10.70: [ 2256]: RECV FAX (00000063): from +49 4371 868642, page 3 in 0:26, INF, 3.85 line/mm, 2-D MR Sep 02 14:53:10.70: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:53:14.25: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:53:14.25: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:53:19.71: [ 2256]: --> [22:+FDCS: 0,2,0,2,1,0,0,1] Sep 02 14:53:19.71: [ 2256]: REMOTE wants 7200 bit/s Sep 02 14:53:19.71: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:53:19.71: [ 2256]: REMOTE wants unlimited page length Sep 02 14:53:19.71: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:53:19.71: [ 2256]: REMOTE wants 2-D MR Sep 02 14:53:19.71: [ 2256]: --> [7:CONNECT] Sep 02 14:53:19.71: [ 2256]: RECV: begin page Sep 02 14:53:19.71: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:53:19.71: [ 2256]: RECV: send trigger 022 Sep 02 14:53:19.71: [ 2256]: <-- data [1] Sep 02 14:53:39.67: [ 2256]: RECV: 1137 total lines, 0 bad lines, 0 consecutive bad lines Sep 02 14:53:39.67: [ 2256]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Sep 02 14:53:39.67: [ 2256]: --> [17:+FPTS: 2,2219,0,0] Sep 02 14:53:41.00: [ 2256]: --> [7:+FET: 0] Sep 02 14:53:41.00: [ 2256]: RECV recv MPS (more pages, same document) Sep 02 14:53:41.00: [ 2256]: --> [2:OK] Sep 02 14:53:41.00: [ 2256]: RECV send MCF (message confirmation) Sep 02 14:53:41.00: [ 2256]: RECV FAX (00000063): from +49 4371 868642, page 4 in 0:31, INF, 3.85 line/mm, 2-D MR Sep 02 14:53:41.00: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:53:44.56: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:53:44.56: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:53:49.84: [ 2256]: --> [22:+FDCS: 0,1,0,2,1,0,0,1] Sep 02 14:53:49.84: [ 2256]: REMOTE wants 4800 bit/s Sep 02 14:53:49.84: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:53:49.84: [ 2256]: REMOTE wants unlimited page length Sep 02 14:53:49.84: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:53:49.84: [ 2256]: REMOTE wants 2-D MR Sep 02 14:53:49.84: [ 2256]: --> [7:CONNECT] Sep 02 14:53:49.84: [ 2256]: RECV: begin page Sep 02 14:53:49.84: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:53:49.84: [ 2256]: RECV: send trigger 022 Sep 02 14:53:49.84: [ 2256]: <-- data [1] Sep 02 14:54:58.98: [ 2256]: RECV: 1140 total lines, 0 bad lines, 0 consecutive bad lines Sep 02 14:54:58.98: [ 2256]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Sep 02 14:54:58.98: [ 2256]: --> [17:+FPTS: 2,2219,0,0] Sep 02 14:55:00.22: [ 2256]: --> [7:+FET: 0] Sep 02 14:55:00.22: [ 2256]: RECV recv MPS (more pages, same document) Sep 02 14:55:00.33: [ 2256]: --> [2:OK] Sep 02 14:55:00.33: [ 2256]: RECV send MCF (message confirmation) Sep 02 14:55:00.33: [ 2256]: RECV FAX (00000063): from +49 4371 868642, page 5 in 1:19, INF, 3.85 line/mm, 2-D MR Sep 02 14:55:00.33: [ 2256]: <-- [7:AT+FDR\r] Sep 02 14:55:03.70: [ 2256]: --> [29:+FTSI: " +49 4371 868642"] Sep 02 14:55:03.70: [ 2256]: REMOTE TSI "+49 4371 868642" Sep 02 14:55:09.48: [ 2256]: --> [22:+FDCS: 0,0,0,2,1,0,0,1] Sep 02 14:55:09.48: [ 2256]: REMOTE wants 2400 bit/s Sep 02 14:55:09.48: [ 2256]: REMOTE wants page width 1728 pixels in 215 mm Sep 02 14:55:09.48: [ 2256]: REMOTE wants unlimited page length Sep 02 14:55:09.48: [ 2256]: REMOTE wants 3.85 line/mm Sep 02 14:55:09.48: [ 2256]: REMOTE wants 2-D MR Sep 02 14:55:09.48: [ 2256]: --> [7:CONNECT] Sep 02 14:55:09.48: [ 2256]: RECV: begin page Sep 02 14:55:09.48: [ 2256]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Sep 02 14:55:09.48: [ 2256]: RECV: send trigger 022 Sep 02 14:55:09.48: [ 2256]: <-- data [1] --- cut here --- ___________________________________________________ Stephan Mankopf Certified Internet Engineer stephan.mankopf@rokd.de ROKD GmbH Softwarehaus http://www.rokd.de
- Prev by Date: Current Patch List for v4.0pl2
- Next by Date: Re: Postscript conversion quality (outbound)
- Prev by thread: Current Patch List for v4.0pl2
- Next by thread: Re: Postscript conversion quality (outbound)
- Index(es):
Project hosted by iFAX Solutions