flexfax: Can't send documents

[Catalin Condurache <catalin@dntis.ro>]

I'm using hylafax v4.0-6 under RH Linux 5.1 and a USR Courier v.everything

When I'm trying to send a fax, the fax server make the connection with the
faxmachine but instead to send the document it hangs up. The log looks
like:

--------------------------------------
Aug 05 12:27:20.08: [ 3225]: SESSION BEGIN 00000010 4032252933
Aug 05 12:27:20.08: [ 3225]: SEND FAX: JOB 8 DEST 252933 COMMID 00000010
Aug 05 12:27:20.08: [ 3225]: DELAY 2600 ms
Aug 05 12:27:22.68: [ 3225]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Aug 05 12:27:22.85: [ 3225]: --> [16:ATE0V1Q0X4S0=0H0]
Aug 05 12:27:22.85: [ 3225]: --> [2:OK]
Aug 05 12:27:22.85: [ 3225]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Aug 05 12:27:23.02: [ 3225]: --> [2:OK]
Aug 05 12:27:23.02: [ 3225]: <-- [14:AT+FCLASS=2.0\r]
Aug 05 12:27:23.06: [ 3225]: --> [2:OK]
Aug 05 12:27:23.06: [ 3225]: <-- [9:AT+FLO=2\r]
Aug 05 12:27:23.10: [ 3225]: --> [2:OK]
Aug 05 12:27:23.10: [ 3225]: <-- [9:AT+FPP=0\r]
Aug 05 12:27:23.14: [ 3225]: --> [2:OK]
Aug 05 12:27:23.14: [ 3225]: <-- [9:AT+FBO=0\r]
Aug 05 12:27:23.18: [ 3225]: --> [2:OK]
Aug 05 12:27:23.18: [ 3225]: <-- [10:AT+FCT=30\r]
Aug 05 12:27:23.22: [ 3225]: --> [2:OK]
Aug 05 12:27:23.22: [ 3225]: <-- [15:AT+FNR=1,1,1,1\r]
Aug 05 12:27:23.26: [ 3225]: --> [2:OK]
Aug 05 12:27:23.26: [ 3225]: <-- [9:AT+FIE=0\r]
Aug 05 12:27:23.30: [ 3225]: --> [2:OK]
Aug 05 12:27:23.30: [ 3225]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 05 12:27:23.35: [ 3225]: --> [2:OK]
Aug 05 12:27:23.35: [ 3225]: <-- [5:ATM0\r]
Aug 05 12:27:23.52: [ 3225]: --> [2:OK]
Aug 05 12:27:23.52: [ 3225]: <-- [14:AT+FCLASS=2.0\r]
Aug 05 12:27:23.66: [ 3225]: --> [2:OK]
Aug 05 12:27:23.66: [ 3225]: <-- [9:AT+FLO=2\r]
Aug 05 12:27:23.80: [ 3225]: --> [2:OK]
Aug 05 12:27:23.80: [ 3225]: <-- [9:AT+FPP=0\r]
Aug 05 12:27:23.94: [ 3225]: --> [2:OK]
Aug 05 12:27:23.94: [ 3225]: <-- [9:AT+FBO=0\r]
Aug 05 12:27:24.08: [ 3225]: --> [2:OK]
Aug 05 12:27:24.08: [ 3225]: <-- [10:AT+FCT=30\r]
Aug 05 12:27:24.22: [ 3225]: --> [2:OK]
Aug 05 12:27:24.22: [ 3225]: <-- [15:AT+FNR=1,1,1,1\r]
Aug 05 12:27:24.36: [ 3225]: --> [2:OK]
Aug 05 12:27:24.36: [ 3225]: <-- [9:AT+FIE=0\r]
Aug 05 12:27:24.50: [ 3225]: --> [2:OK]
Aug 05 12:27:24.50: [ 3225]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 05 12:27:24.65: [ 3225]: --> [2:OK]
Aug 05 12:27:24.65: [ 3225]: <-- [22:AT+FLI="NothingSetup"\r]
Aug 05 12:27:24.80: [ 3225]: --> [2:OK]
Aug 05 12:27:24.84: [ 3225]: DIAL 252933
Aug 05 12:27:24.84: [ 3225]: <-- [11:ATDT252933\r]
Aug 05 12:27:39.36: [ 3225]: --> [4:+FCO]
Aug 05 12:27:41.53: [ 3225]: -->
   [79:+FNF:000079000000820F09130010050295C85801490244594E414D4943204E4554574F524B2003]
Aug 05 12:27:41.53: [ 3225]: REMOTE NSF
   "000079000000820F09130010050295C85801490244594E414D4943204E4554574F524B2003"
Aug 05 12:27:42.22: [ 3225]: --> [27:+FCI:"       40 32 252 933"]
Aug 05 12:27:42.22: [ 3225]: REMOTE CSI "40 32 252 933"
Aug 05 12:27:42.62: [ 3225]: --> [20:+FIS:1,3,0,2,1,0,0,4]
Aug 05 12:27:42.62: [ 3225]: --> [2:OK]
Aug 05 12:27:42.62: [ 3225]: REMOTE best rate 9600 bit/s
Aug 05 12:27:42.62: [ 3225]: REMOTE max page width 1728 pixels in 215 mm
Aug 05 12:27:42.62: [ 3225]: REMOTE max unlimited page length
Aug 05 12:27:42.62: [ 3225]: REMOTE best vres 7.7 line/mm
Aug 05 12:27:42.62: [ 3225]: REMOTE best format 2-D MR
Aug 05 12:27:42.62: [ 3225]: REMOTE best 20 ms, 10 ms/scanline
Aug 05 12:27:42.62: [ 3225]: USE 9600 bit/s
Aug 05 12:27:42.62: [ 3225]: USE 20 ms, 10 ms/scanline
Aug 05 12:27:42.62: [ 3225]: <-- [5:ATH0\r]
Aug 05 12:27:43.02: [ 3225]: --> [2:OK]
Aug 05 12:27:43.02: [ 3225]: SESSION END

------------------------------------------------------

Any help?

thank you,
catalin

==============================================================================
     Catalin CONDURACHE         |        Dynamic Network Technologies
    C.Condurache@dntis.ro       |           Moara de Foc 35, et. 7
     http://www.dntis.ro        |             IASI-6600, ROMANIA
==============================================================================