Re: flexfax: sending problem

[Nico Kadel-Garcia <raoul@cirl.meei.harvard.edu>]

-----BEGIN PGP SIGNED MESSAGE-----

On Tue, 28 Jul 1998, [ISO-8859-1] Markus Jäckle wrote:

> Date: Tue, 28 Jul 1998 10:15:34 +0200
> From: "[ISO-8859-1] Markus Jäckle" <markus.jaeckle@logimatik.ch>
> To: flexfax@sgi.com
> Subject: flexfax: sending problem
> 
> hi out there
> i am running hylafax 4.0pl2-4 on a linux 5.2 system 

5.2? RedHat isn't shipping this. Who sent it?

> my roblem is taht hylafax dont send faxes
> when i start SUSEFAX i get the satus that hylafax is running but when i try
> to send a fax nothing happens
> i only get the error message 
> SuSEFax.actionPerformed:SuSEFax.PROTOException:NetCon.check:empty Reply
> String
> and i get the mail

SuSEFax? I have to assume that there is some interface between this
tool and HylaFAX. How do you have these cross-connected?

> Your facsimile job to 3387 was not sent because
> the document conversion script was not found.
> 
>     ---- Unsent job status ----
> 
>    Destination: 3387
>          JobID: 27
>        GroupID: 27
>         Sender: Markus J ckle
>       Mailaddr: markus.jaeckle@logimatik.ch
> Submitted From: gfproxy1.bsh.logimatik.ch
>     Page Width: 209 (mm)
>    Page Length: 296 (mm)
>     Resolution: 98 (lpi)
>         Status: Unrecoverable error: undefined in to
> 
> Unexpected interpreter error -21.
> Error object: to(d84)name(0x81c1740#bff)
> Execution stack at 0x8149b88:
> 0x8152e9c: 0x0f oper --F---e-- 0x0000 0x0806d844 = %interp_exit
> 0x8152ea4: 0x12 str  --F-rxe-- 0x0000 0x00000000 = 
> 0x8152eac: 0x03 file --L-rxe-- 0x0001 0x0815a6d8
> 0x8152eb4: 0x0e null --F---e-- 0x0000 0x08078750
> 0x8152ebc: 0x03 file --S-rxe-- 0x0001 0x0814d400
> 0x8152ec4: 0x0f oper --F---e-- 0x0000 0x0807870c = %runexec_finish
> 0x8152ecc: 0x03 file --S-rxe-- 0x0001 0x0814d400
> 0x8152ed4: 0x05 mpry --G-rxe-- 0x0039 0x0818933e
> Dictionary stack at 0x8149ab0:
> 0x81536cc: 0x02 dict --Gwrx--- 0x0000 0x0815381c
> 0x81536d4: 0x02 dict --Gwrx--- 0x0000 0x08198584
> 0x81536dc: 0x02 dict --Lwrx--- 0x0000 0x08158720
> 0x81536e4: 0x02 dict --Lwrx--- 0x0815 0x0815a96c
> 
>        Dialogs: 0 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 0 (total phone calls placed)
>          Pages: 0 (pages transmitted)
>       TotPages: 0 (total pages to transmit)
>       Attempts: 0 (attempts to send current page)
>         Dirnum: 0 (directory of next page to send)
> 
>     ---- Documents submitted for transmission ----

Uh, oh. Where did you get the Postscript you are using for this?
Perchance from some !@W#$ MicroSquishy driver?

			Nico Garcia
			Senior Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNb36pj/+ItycgIJRAQF/1QP/ZPsU6jKY+QpC0SKjZXl3iv1LVc69HGUt
KNV00OBXhS0/ufL/+xJegcdC9lqWflceupcAJrvNc7kKkmQ1m/2SWjbva99UYWG3
tKPFqYHg9Xr88SP/SQJ/2rkQwr0e/b/i152A91sznti2xoBx8tETQEV1c3/GHDmo
LHfOFxfHM5c=
=V82i
-----END PGP SIGNATURE-----