HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Fax jobs queued only for one port



Alain,

For Hylafax 4.0pl0, the status 'running and idle' is normal for:

1. no faxgetty servicing the modem
and/or
2. faxgetty running, RingsBeforeAnswer > 0 (in config.tty#)

If RingsBeforeAnswer = 0 in config.tty#, then you get the status:
"Waiting for modem to come ready", which is OK.  I think this quirk was 
fixed in the latest release of Hylafax, which I haven't had time to 
install yet.

Regards, Dave


On Wed, 27 May 1998, Alain Berger wrote:

> 
> any idea, why the scheduler gets no proper info about the modem's
> status ?
> I can get no status "running and idle" from the two Zyxel Modems -
> because there are no faxgettys running or are the modems in a wrong
> configuration ?
> 
> Cheers,
> 
> -- 
> Alain Berger	                |         Tel: +41 1 279 33 29
> Telekurs Payserv AG             |         Fax: +41 1 446 74 61
> Hardturmstr.201, 8021 Zürich    |      E-Mail: bga@payserv.ch
> 
> 




Project hosted by iFAX Solutions