flexfax: Truncated pages

[john@meissen.org]

I just installed HylaFAX 4.0pl1 for receiving faxes, and it almost
works. The images are all truncated about halfway down the page.

I've scoured the man pages, local and online documentation, FAQ,
and maillist archives. I'm out of ideas.

Any suggestions would be greatly appreciated.

john-

Typical log follows...

May 18 16:09:14.45: [20477]: SESSION BEGIN 00000015 15035268983
May 18 16:09:14.45: [20477]: <-- [4:ATA\r]
May 18 16:09:22.72: [20477]: --> [5:+FCON]
May 18 16:09:22.88: [20477]: ANSWER: FAX CONNECTION
May 18 16:09:22.88: [20477]: RECV FAX: begin
May 18 16:09:24.25: [20477]: --> [29:+FTSI: "         15036907704"]
May 18 16:09:24.25: [20477]: REMOTE TSI "15036907704"
May 18 16:09:24.66: [20477]: --> [22:+FDCS: 0,3,0,2,1,0,0,3]
May 18 16:09:24.66: [20477]: REMOTE wants 9600 bit/s
May 18 16:09:24.66: [20477]: REMOTE wants page width 1728 pixels in 215 mm
May 18 16:09:24.66: [20477]: REMOTE wants unlimited page length 
May 18 16:09:24.66: [20477]: REMOTE wants 3.85 line/mm
May 18 16:09:24.66: [20477]: REMOTE wants 2-D MR
May 18 16:09:24.66: [20477]: --> [2:OK]
May 18 16:09:24.66: [20477]: <-- [7:AT+FDR\r]
May 18 16:09:26.28: [20477]: --> [5:+FCFR]
May 18 16:09:28.29: [20477]: --> [22:+FDCS: 0,3,0,2,1,0,0,3]
May 18 16:09:28.29: [20477]: REMOTE wants 9600 bit/s
May 18 16:09:28.29: [20477]: REMOTE wants page width 1728 pixels in 215 mm
May 18 16:09:28.29: [20477]: REMOTE wants unlimited page length 
May 18 16:09:28.29: [20477]: REMOTE wants 3.85 line/mm
May 18 16:09:28.29: [20477]: REMOTE wants 2-D MR
May 18 16:09:28.29: [20477]: --> [7:CONNECT]
May 18 16:09:28.29: [20477]: RECV: begin page
May 18 16:09:28.29: [20477]: RECV: send trigger 021
May 18 16:09:28.29: [20477]: <-- data [1]
May 18 16:09:49.24: [20477]: RECV: 12225 bytes of data, 635 total lines
May 18 16:09:49.51: [20477]: --> [17:+FPTS: 1,2219,0,0]
May 18 16:09:52.57: [20477]: --> [7:+FET: 0]
May 18 16:09:52.57: [20477]: RECV recv MPS (more pages, same document)
May 18 16:09:52.69: [20477]: --> [2:OK]
May 18 16:09:52.69: [20477]: RECV send MCF (message confirmation)
May 18 16:09:52.69: [20477]: RECV FAX (00000015): from 15036907704, page 1 in 0:28, INF, 3.85 line/mm, 2-D MR
May 18 16:09:52.69: [20477]: <-- [7:AT+FDR\r]
May 18 16:09:54.73: [20477]: --> [7:CONNECT]
May 18 16:09:54.73: [20477]: RECV: begin page
May 18 16:09:54.73: [20477]: RECV: send trigger 021
May 18 16:09:54.73: [20477]: <-- data [1]
May 18 16:10:26.38: [20477]: RECV: 12177 bytes of data, 246 total lines
May 18 16:10:26.50: [20477]: --> [17:+FPTS: 1,2219,0,0]
May 18 16:10:29.71: [20477]: --> [7:+FET: 2]
May 18 16:10:29.71: [20477]: RECV recv EOP (no more pages or documents)
May 18 16:10:29.83: [20477]: --> [2:OK]
May 18 16:10:29.83: [20477]: RECV send MCF (message confirmation)
May 18 16:10:29.83: [20477]: RECV FAX (00000015): from 15036907704, page 2 in 0:
37, INF, 3.85 line/mm, 2-D MR
May 18 16:10:29.96: [20477]: RECV FAX (00000015): recvq/fax00010.tif from 15036907704, route to <unspecified>, 2 pages in 1:07
May 18 16:10:29.96: [20477]: <-- [7:AT+FDR\r]
May 18 16:10:32.89: [20477]: --> [8:+FHNG: 0]
May 18 16:10:32.89: [20477]: REMOTE HANGUP: Normal and proper end of connection 
(code 0)
May 18 16:10:32.89: [20477]: RECV FAX: bin/faxrcvd "recvq/fax00010.tif" "modem" "00000015" ""
May 18 16:10:33.27: [20477]: RECV FAX: end
May 18 16:10:33.27: [20477]: SESSION END

-- 

John Meissen                                           jmeissen@teleport.com
http://www.meissen.org                                 jmeissen@pyramid.com
Fax: +1.503.526.8983