HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Timeout on PostScipt jobs





          Hello,

just a quick question:

where is the default value for the variable "PostScriptTimeout" defined?
I made a "grep" for that expression on all files but I didn't find it.

I had to set this variable to 600 sec in /var/spool/fax/etc/config,
because I got timeout errors after about 2 minutes when trying to send
faxes with more then 3 or 4 sentences.

I don't really care if the fax needs 2 or 10 minutes to be prepared, I
was just wondering about the close timeout. The faxserver runs under
Linux (Kernel 2.0.33) on a 386DX-40 with 8MB.

Now a one-page fax (DIN A4) needs about 6 minutes to be prepared for
sending. Is this a typical average time on such a machine?


-- 
      \    /
       \/\/olfgang
            		      
                                   ___ 
Wolfgang Mettbach                 (O O)             Uekern 17
wmettbach@metronet.de            {  Y  }            33098 Paderborn (Germany)
===================================#=#========================================
"Imagination is more important than knowledge" (Albert Einstein)




Project hosted by iFAX Solutions