HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ZyXEL 1496 won't answer



-----BEGIN PGP SIGNED MESSAGE-----

On Mon, 16 Mar 1998, Alan Sparks wrote:

> Running HylaFAX 4pl1 on SunOS 4.1.4...
> 
> I've a ZyXEL 1496 set up here, good luck sending fax.  Have a faxgetty
> running OK on /dev/cua0 which shows "running and idle," with inbound service
> enabled.  So far, so good.

BAD FERRET! NO BISCUIT!

Sorry, I'm OK now.

Faxgetty should be running on /dev/tty*, not the /dev/cua* craziness.

Also take a look at my notes for SunOS at
	http://cirl.meei.harvard.edu/~raoul/INSTALL-sunos4.1.x-v4.0pl2.php


> But it will not answer an incoming call.  (using the stock config file).
> RingsBeforeAnswer is set to 1.  When I call the modem, faxstat shows
> "Listening to rings from modem", and I see a LCK..cua0 file created (in my
> /var/spool/locks dir).  Lock file disappears when call is discontinued, and
> faxstat returns to "running and idle."

Have you got a getty running on the associated /dev/tty* file?
I'm having no difficulty with a Zyxel 1496 under SunOS, on /dev/ttyb.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNQ6xnz/+ItycgIJRAQF6VgP/U6lmanKBbDbVCSWuAfL9EVdJjwxJ9Wn/
pqY6m6MusryLjnnfeL6bywgtSXGiTuXsMa4zb9yCzNTRxrCe+Ilf5SSan7U2R9OP
pOcu4ZwrDfymI+ZkDrmeBGEJuraAp3xM4EuljXG5ZQzObNj/V9nWi3snVYZfjawm
DT7j8AIOnzE=
=XtrA
-----END PGP SIGNATURE-----




Project hosted by iFAX Solutions