flexfax: Hylafax on Nextstep 3.3 with gcc-2.8.0

[John James Ackley <john@softspace.com>]

Having problems compiling Dispatcher.c++ because of Sys.h, and I suspect, port.h.

Does anyone have a port.h suitable for use on:
NeXT Mach 3.3: Mon May 22 17:56:06 PDT 1995; root(rcbuilder):mk-171.12.obj~11/RC_m68k/RELEASE_M68K

Thanks,
John Ackley <john@softspace.com>
Date: Mon, 16 Mar 1998 08:54:01 +0100 (CEST)
From: kees <kees@schoen.nl>
To: David Woolley <david@djwhome.demon.co.uk>
cc: Sascha Ottolski <alzhimer@cs.tu-berlin.de>, flexfax@sgi.com
Subject: Re: flexfax: wrong status-message if receiving fax failed: normal and proper end of
Sender: owner-flexfax@celestial.com

Hello,

I have a tornado FM288SA modem and I see the same problem quite regulary.

Kees


On Sun, 15 Mar 1998, David Woolley wrote:

> 
> Hylafax is reporting the status from the modem correctly; your problem is
> with the modem or sender; you've given us no clue as to the type of modem.
> 
> > 
> > there is a small problem when I _not_ receive a fax for some error. Is there a
> * simple way to correct this?
> > Mar 14 10:54:27.20: [  891]: <-- [7:AT+FDR\r]
> > Mar 14 10:54:32.09: [  891]: --> [29:+FTSI: "+49 30 xxxxx      "]
> > Mar 14 10:54:32.09: [  891]: REMOTE TSI "+49 30 xxxxx"
> 
>    Five repeats of the above pair
> 
> > Mar 14 10:55:01.91: [  891]: --> [8:+FHNG: 0]
> 
>   Modem reports normal and proper end of connection.
> 
> > Mar 14 10:55:01.91: [  891]: REMOTE HANGUP: Normal and proper end of connection (code 0)
> 
>   Hylafax properly reports this.
> 
>