flexfax: Unspecified Transmit Phase B error

[Werner Antweiler <werner@pacific.commerce.ubc.ca>]

Hi,

I just installed HylaFax under Irix 6.2 in orer to send faxes
through my USR 33.6 Sportster Faxmodem. Everything seems to be
working fine during the installation, but when I submit a page
via "sendfax", the modem dials the remote fax machine, I get
an initial contact, but the remote fax machine aborts the
connection after about a second. Below is the error output
from the session log.

I checked that the PostScript converter (gs) is generating a
proper TIFF file.

I changed the Class2DDISCmd command to "AT+FDIS" in the
/var/spool/fax/config/class2.0 file (as is mentioned in=20
the troubleshooting guide), but without success.

Any explanations what causes the problem?
Any ideas what I can do to fix the problem?

Best regards,

Werner Antweiler
Univ. of British Columbia / Faculty of Commerce
2053 Main Mall, Vancouver, B.C., V6T 1Z2, Canada
E-mail: werner@pacific.commerce.ubc.ca
Tel: (604) 822-8484 - Fax: (604) 822-8477



----- Forwarded message from Facsimile Agent -----

>From fax  Wed Mar 11 16:27:20 1998
Date: Wed, 11 Mar 1998 16:27:19 -0800 (PST)
From: Facsimile Agent <fax>
Message-Id: <199803120027.QAA04738@pacific.commerce.ubc.ca>
To: werner@pacific.commerce.ubc.ca
Subject: facsimile job 23 to 28477 failed

Your facsimile job to 28477 failed because:
    Unspecified Transmit Phase B error; too many attempts to send

    ---- Transcript of session follows ----

Mar 11 16:26:08.29: [ 4664]: SESSION BEGIN 00000018 160428477
Mar 11 16:26:08.29: [ 4664]: SEND FAX: JOB 23 DEST 28477 COMMID 00000018
Mar 11 16:26:08.29: [ 4664]: MODEM set DTR OFF
Mar 11 16:26:08.29: [ 4664]: MODEM set baud rate: 0 baud (flow control un=
changed)
Mar 11 16:26:08.30: [ 4664]: DELAY 2600 ms
Mar 11 16:26:10.89: [ 4664]: MODEM set DTR ON
Mar 11 16:26:10.89: [ 4664]: MODEM set baud rate: 38400 baud, input flow =
RTS/CTS, output flow RTS/CTS
Mar 11 16:26:10.89: [ 4664]: MODEM flush i/o
Mar 11 16:26:10.89: [ 4664]: <-- [17:ATE0V1Q0X4S0=3D0H0\r]
Mar 11 16:26:11.04: [ 4664]: --> [2:OK]
Mar 11 16:26:11.04: [ 4664]: <-- [32:ATS8=3D2S7=3D60&H1&I0&R2S13=3D1&D2&C=
1\r]
Mar 11 16:26:11.19: [ 4664]: --> [2:OK]
Mar 11 16:26:11.19: [ 4664]: <-- [14:AT+FCLASS=3D2.0\r]
Mar 11 16:26:11.34: [ 4664]: --> [2:OK]
Mar 11 16:26:11.34: [ 4664]: <-- [9:AT+FLO=3D2\r]
Mar 11 16:26:11.49: [ 4664]: --> [2:OK]
Mar 11 16:26:11.49: [ 4664]: <-- [9:AT+FPP=3D0\r]
Mar 11 16:26:11.64: [ 4664]: --> [2:OK]
Mar 11 16:26:11.64: [ 4664]: <-- [9:AT+FBO=3D0\r]
Mar 11 16:26:11.79: [ 4664]: --> [2:OK]
Mar 11 16:26:11.79: [ 4664]: <-- [10:AT+FCT=3D30\r]
Mar 11 16:26:11.94: [ 4664]: --> [2:OK]
Mar 11 16:26:11.94: [ 4664]: <-- [15:AT+FNR=3D1,1,1,1\r]
Mar 11 16:26:12.09: [ 4664]: --> [2:OK]
Mar 11 16:26:12.09: [ 4664]: <-- [9:AT+FIE=3D0\r]
Mar 11 16:26:12.24: [ 4664]: --> [2:OK]
Mar 11 16:26:12.24: [ 4664]: <-- [9:AT+FBU=3D0\r]
Mar 11 16:26:12.39: [ 4664]: --> [2:OK]
Mar 11 16:26:12.39: [ 4664]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
Mar 11 16:26:12.54: [ 4664]: --> [2:OK]
Mar 11 16:26:12.54: [ 4664]: <-- [5:ATM1\r]
Mar 11 16:26:12.68: [ 4664]: --> [2:OK]
Mar 11 16:26:12.68: [ 4664]: MODEM input buffering enabled
Mar 11 16:26:12.68: [ 4664]: <-- [14:AT+FCLASS=3D2.0\r]
Mar 11 16:26:12.91: [ 4664]: --> [2:OK]
Mar 11 16:26:12.91: [ 4664]: <-- [9:AT+FLO=3D2\r]
Mar 11 16:26:13.14: [ 4664]: --> [2:OK]
Mar 11 16:26:13.14: [ 4664]: <-- [9:AT+FPP=3D0\r]
Mar 11 16:26:13.37: [ 4664]: --> [2:OK]
Mar 11 16:26:13.37: [ 4664]: <-- [9:AT+FBO=3D0\r]
Mar 11 16:26:13.60: [ 4664]: --> [2:OK]
Mar 11 16:26:13.60: [ 4664]: <-- [10:AT+FCT=3D30\r]
Mar 11 16:26:13.83: [ 4664]: --> [2:OK]
Mar 11 16:26:13.83: [ 4664]: <-- [15:AT+FNR=3D1,1,1,1\r]
Mar 11 16:26:14.06: [ 4664]: --> [2:OK]
Mar 11 16:26:14.06: [ 4664]: <-- [9:AT+FIE=3D0\r]
Mar 11 16:26:14.29: [ 4664]: --> [2:OK]
Mar 11 16:26:14.29: [ 4664]: <-- [9:AT+FBU=3D0\r]
Mar 11 16:26:14.52: [ 4664]: --> [2:OK]
Mar 11 16:26:14.52: [ 4664]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
Mar 11 16:26:14.75: [ 4664]: --> [2:OK]
Mar 11 16:26:14.75: [ 4664]: <-- [30:AT+FLI=3D"UBC - Policy Analysi"\r]
Mar 11 16:26:14.98: [ 4664]: --> [2:OK]
Mar 11 16:26:15.01: [ 4664]: DIAL 28477
Mar 11 16:26:15.01: [ 4664]: <-- [10:ATDT28477\r]
Mar 11 16:26:33.77: [ 4664]: --> [4:+FCO]
Mar 11 16:26:37.10: [ 4664]: --> [38:+FNF:=1B+FCI:"        604 822 8477"=14=
+FIS]
Mar 11 16:26:37.11: [ 4664]: REMOTE NSF "=1B+FCI:"        604 822 8477"=14=
+FIS"
Mar 11 16:26:37.11: [ 4664]: --> [56:1,5,0,2,1,0,0,3=3D=E1=1DQ=8C=A2=14=A7=
@E*T=B9JV69=BD=B1=90=F2,=E0c=0B=F9=DC=A7>=FF=C9%2=94=B1=CCf=D6W=9A=BA]
Mar 11 16:26:37.21: [ 4664]: --> [21:=0E=02.=02=02=12"6"=02=02=02=03=0B=03=
=03=03+=03=03=03]
Mar 11 16:26:37.32: [ 4664]: --> [37:=80=1BS=93=BFX=88=19=ECW*=86=86=99=B0=
=B7O0'=87}k=80=88o=E8=F8=9F=19=991?#R=04=E6=FC]
Mar 11 16:27:17.32: [ 4664]: MODEM TIMEOUT: reading line from modem
Mar 11 16:27:17.32: [ 4664]: REMOTE HANGUP: Unspecified Transmit Phase B =
error (code 20)
Mar 11 16:27:17.32: [ 4664]: SEND FAILED: Unspecified Transmit Phase B er=
ror
Mar 11 16:27:17.33: [ 4664]: SEND FAILED: Unspecified Transmit Phase B er=
ror; too many attempts to send
Mar 11 16:27:17.33: [ 4664]: <-- [5:ATH0\r]
Mar 11 16:27:17.55: [ 4664]: --> [4:ATH0]
Mar 11 16:27:17.55: [ 4664]: --> [2:OK]
Mar 11 16:27:17.55: [ 4664]: MODEM set DTR OFF
Mar 11 16:27:17.55: [ 4664]: MODEM set baud rate: 0 baud (flow control un=
changed)
Mar 11 16:27:17.58: [ 4664]: SESSION END

    ---- Unsent job status ----

   Destination: 28477
         JobID: 23
       GroupID: 23
        Sender: Werner Antweiler
      Mailaddr: werner@pacific.commerce.ubc.ca
        CommID: 00000018
Submitted From: localhost
    Page Width: 215 (mm)
   Page Length: 279 (mm)
    Resolution: 98 (lpi)
        Status: Unspecified Transmit Phase B error; too many attempts to =
send
       Dialogs: 3 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 3 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 2 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc23.cover        10915 PostScript cover page
docq/doc25.ps           15202 PostScript

----- End of forwarded message from Facsimile Agent -----