Re: flexfax: Can fax in Linux, but not whfc 0.8.1?

[Christopher Luk <wluk@hkcccc.org>]

While viewing with Ghostview for win95, i got the following error message.
Isn't it because the .ps file convertion have problem? Can i fix it?

Aladdin Ghostscript 5.10 (1997-11-23)
Copyright (C) 1997 Aladdin Enterprises, Menlo Park, CA.  All rights
reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Displaying non DSC file V:/haha/doc37.ps.28
Unrecoverable error: undefined in WHFC

--- Begin offending input ---
    WHFC A Fax Client for HylaFAX



    Copyright (C) 1998 Transcom GbR, RGW Express Airfreight GmbH



    This program is free software; you can redistribute it and/or

    modify it under the terms of the GNU General Public License as

    published by
--- End offending input ---
file offset = 256
gsdll_execute_cont returns -21

Christopher Luk wrote:

> I have linux 2.0.30, gcc2.7, hylafax 4.0pl2 running a fax sever for
> chinese windows 95 client (4.00950 B) using whfc 0.8.1. I can use
> "sendfax -d xxxx.xxxx file.ps" to send fax. The windows 95 clinet can
> successfully queue send job in the send queue, and the monitor can
> monitor it, but the send job was never successfully sent. Even I try two
> fax machine, problems still persist. With the following log:
> ...
> Mar 11 12:25:19.35: [ 4811]: REMOTE HANGUP: Unspecified Transmit Phase B
> error (code 20)
> Mar 11 12:25:19.92: [ 4811]: --> [2:OK]
> ...
> This only happen for windows 95 client. Please give me some advice.
> The full log is attached below.
> --
> Regards, Christopher Luk
>    System Analyst - The Hong Kong Council of the Church of Christ in
> China
>               Phone : (852) 2397-1022 Fax : (852) 2397-7405
>      mailto:wluk@hkcccc.org URL : http://www.hkcccc.org (Chinese based)
> --
> log 1.
>
> Mar 11 12:25:04.00: [ 4811]: SESSION BEGIN 00000047 852023977405
> Mar 11 12:25:04.00: [ 4811]: SEND FAX: JOB 24 DEST 23977405 COMMID
> 00000047
> Mar 11 12:25:04.00: [ 4811]: DELAY 2600 ms
> Mar 11 12:25:06.60: [ 4811]: <-- [15:ATE0V1Q0S0=0H0\r]
> Mar 11 12:25:06.61: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.61: [ 4811]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> Mar 11 12:25:06.62: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.62: [ 4811]: <-- [12:AT+FCLASS=2\r]
> Mar 11 12:25:06.63: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.63: [ 4811]: <-- [10:AT+FTBC=0\r]
> Mar 11 12:25:06.64: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.64: [ 4811]: <-- [10:AT+FBOR=0\r]
> Mar 11 12:25:06.65: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.65: [ 4811]: <-- [13:AT+FPHCTO=30\r]
> Mar 11 12:25:06.66: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.66: [ 4811]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Mar 11 12:25:06.67: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.67: [ 4811]: <-- [5:ATM0\r]
> Mar 11 12:25:06.68: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.68: [ 4811]: <-- [12:AT+FCLASS=2\r]
> Mar 11 12:25:06.79: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.79: [ 4811]: <-- [10:AT+FTBC=0\r]
> Mar 11 12:25:06.90: [ 4811]: --> [2:OK]
> Mar 11 12:25:06.90: [ 4811]: <-- [10:AT+FBOR=0\r]
> Mar 11 12:25:07.01: [ 4811]: --> [2:OK]
> Mar 11 12:25:07.01: [ 4811]: <-- [13:AT+FPHCTO=30\r]
> Mar 11 12:25:07.12: [ 4811]: --> [2:OK]
> Mar 11 12:25:07.12: [ 4811]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Mar 11 12:25:07.23: [ 4811]: --> [2:OK]
> Mar 11 12:25:07.23: [ 4811]: <-- [17:AT+FLID="HKCCCC"\r]
> Mar 11 12:25:07.34: [ 4811]: --> [2:OK]
> Mar 11 12:25:07.35: [ 4811]: DIAL 23977405
> Mar 11 12:25:07.35: [ 4811]: <-- [13:ATDT23977405\r]
> Mar 11 12:25:16.44: [ 4811]: --> [5:+FCON]
> Mar 11 12:25:18.68: [ 4811]: --> [29:+FCSI: "      +852 2397 7405"]
> Mar 11 12:25:18.68: [ 4811]: REMOTE CSI "+852 2397 7405"
> Mar 11 12:25:18.97: [ 4811]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
> Mar 11 12:25:19.08: [ 4811]: --> [2:OK]
> Mar 11 12:25:19.08: [ 4811]: REMOTE best rate 9600 bit/s
> Mar 11 12:25:19.08: [ 4811]: REMOTE max page width 1728 pixels in 215 mm
>
> Mar 11 12:25:19.08: [ 4811]: REMOTE max unlimited page length
> Mar 11 12:25:19.08: [ 4811]: REMOTE best vres 7.7 line/mm
> Mar 11 12:25:19.08: [ 4811]: REMOTE best format 2-D MR
> Mar 11 12:25:19.08: [ 4811]: REMOTE best 20 ms, 10 ms/scanline
> Mar 11 12:25:19.08: [ 4811]: USE 9600 bit/s
> Mar 11 12:25:19.08: [ 4811]: USE 20 ms, 10 ms/scanline
> Mar 11 12:25:19.08: [ 4811]: SEND file "docq/doc33.ps;30"
> Mar 11 12:25:19.09: [ 4811]: Modem does not support document page width,
> max page width 2432 pixels, image width 1686 pixels
> Mar 11 12:25:19.09: [ 4811]: <-- [5:ATH0\r]
> Mar 11 12:25:19.35: [ 4811]: --> [9:+FHNG: 20]
> Mar 11 12:25:19.35: [ 4811]: REMOTE HANGUP: Unspecified Transmit Phase B
> error (code 20)
> Mar 11 12:25:19.92: [ 4811]: --> [2:OK]
> Mar 11 12:25:19.92: [ 4811]: SESSION END
> --
> log 2.
> Mar 11 12:22:56.27: [ 4764]: SESSION BEGIN 00000046 852023910970
> Mar 11 12:22:56.28: [ 4764]: SEND FAX: JOB 28 DEST 23910970 COMMID
> 00000046
> Mar 11 12:22:56.28: [ 4764]: DELAY 2600 ms
> Mar 11 12:22:58.88: [ 4764]: <-- [15:ATE0V1Q0S0=0H0\r]
> Mar 11 12:22:58.89: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.89: [ 4764]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> Mar 11 12:22:58.90: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.90: [ 4764]: <-- [12:AT+FCLASS=2\r]
> Mar 11 12:22:58.91: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.91: [ 4764]: <-- [10:AT+FTBC=0\r]
> Mar 11 12:22:58.92: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.92: [ 4764]: <-- [10:AT+FBOR=0\r]
> Mar 11 12:22:58.93: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.93: [ 4764]: <-- [13:AT+FPHCTO=30\r]
> Mar 11 12:22:58.94: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.94: [ 4764]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Mar 11 12:22:58.95: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.95: [ 4764]: <-- [5:ATM0\r]
> Mar 11 12:22:58.96: [ 4764]: --> [2:OK]
> Mar 11 12:22:58.96: [ 4764]: <-- [12:AT+FCLASS=2\r]
> Mar 11 12:22:59.07: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.07: [ 4764]: <-- [10:AT+FTBC=0\r]
> Mar 11 12:22:59.18: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.18: [ 4764]: <-- [10:AT+FBOR=0\r]
> Mar 11 12:22:59.29: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.29: [ 4764]: <-- [13:AT+FPHCTO=30\r]
> Mar 11 12:22:59.40: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.40: [ 4764]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
> Mar 11 12:22:59.51: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.51: [ 4764]: <-- [17:AT+FLID="HKCCCC"\r]
> Mar 11 12:22:59.62: [ 4764]: --> [2:OK]
> Mar 11 12:22:59.63: [ 4764]: DIAL 23910970
> Mar 11 12:22:59.63: [ 4764]: <-- [13:ATDT23910970\r]
> Mar 11 12:23:13.60: [ 4764]: --> [5:+FCON]
> Mar 11 12:23:15.81: [ 4764]: --> [29:+FCSI: "      +852 2391 0970"]
> Mar 11 12:23:15.81: [ 4764]: REMOTE CSI "+852 2391 0970"
> Mar 11 12:23:16.20: [ 4764]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
> Mar 11 12:23:16.20: [ 4764]: --> [2:OK]
> Mar 11 12:23:16.20: [ 4764]: REMOTE best rate 9600 bit/s
> Mar 11 12:23:16.20: [ 4764]: REMOTE max page width 1728 pixels in 215 mm
>
> Mar 11 12:23:16.20: [ 4764]: REMOTE max unlimited page length
> Mar 11 12:23:16.20: [ 4764]: REMOTE best vres 7.7 line/mm
> Mar 11 12:23:16.20: [ 4764]: REMOTE best format 2-D MR
> Mar 11 12:23:16.20: [ 4764]: REMOTE best 20 ms, 10 ms/scanline
> Mar 11 12:23:16.20: [ 4764]: USE 9600 bit/s
> Mar 11 12:23:16.21: [ 4764]: USE 20 ms, 10 ms/scanline
> Mar 11 12:23:16.21: [ 4764]: <-- [5:ATH0\r]
> Mar 11 12:23:16.45: [ 4764]: --> [9:+FHNG: 20]
> Mar 11 12:23:16.45: [ 4764]: REMOTE HANGUP: Unspecified Transmit Phase B
> error (code 20)
> Mar 11 12:23:17.03: [ 4764]: --> [2:OK]
> Mar 11 12:23:17.03: [ 4764]: SESSION END



--
Regards, Christopher Luk
   System Analyst - The Hong Kong Council of the Church of Christ in China
              Phone : (852) 2397-1022 Fax : (852) 2397-7405
     mailto:wluk@hkcccc.org URL : http://www.hkcccc.org (Chinese based)