HylaFAX The world's most advanced open source fax server |
-----BEGIN PGP SIGNED MESSAGE----- On Mon, 9 Mar 1998 jlb@ordata.com wrote: > Mattew Rice suggested I mail my trouble to the mailing list. I have > read the archive concerning the previous reports and tried to > implement the fixes. Nothing seems to work. Minicom and faxgetty > both are set to use /var/lock as their lock directories. Even when > minicom creates both lock files faxgetty continues to get after the > /dev/ttyE0 and /dev/modem. Neither program reports the device > locked. The Stallion EasyIO-8 board has generally functioned well in > both SCO 3.2v4.1 and Linux 2.0.29 with minicom or ppp-on in the > latter and ecu and uucp in the former. > The box is a 486DX-50 with Ultrastor 34F, Cirrus Logic video, and the > Stallion EasyIO-8. No IDE or soundcard devices. If I kill faxgetty > and comment out the inittab entry for the faxgetty, the other > programs work. Which version of HylaFAX are you using, and did you compile *HylaFAX* to use /var/lock with ascii or binary lock files as appropriate to your software? Remember also: all these devices have to be configured to use the same lock files and tty lines to interact. This means you cannot use /dev/ttyE0 in one place, /dev/modem in another, and expect them to interact correctly. Nico Garcia Engineer, CIRL Mass. Eye and Ear Infirmary raoul@cirl.meei.harvard.edu -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBNQSkZj/+ItycgIJRAQE0ZgP/YB5IB0JvdIZTNssiPOu3FDe7A4sqWmlA bK0i0L3laSmggMtQlCLwMbzJ2687u8093luIhsxTVaD1IpZpIxFOfQ0nG/DeVBH0 1J5PNKyNQR9Pzt0IS+nmeUdKl2JIeR/+++GduO1APTzNELsHRX5EBGMRGf8Q7/mZ P3U4leKaimk= =8PL0 -----END PGP SIGNATURE-----