HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Problems whit Faxcover in WHFC



Hello,

        I have HilaFAX 4.0p11 in a Ultra Sparc with Solaris 2.5.1. In this
machine sendfax works fine. I have also MacFlex 1.5 in some Mac's and also
they work fine. I have only problems with WHFC 0.7.0 in W95. 

        Whith this Client, WHFC 0.7.0, I am able to send faxes whitout
a cover page. When I try to send a fax with a cover page (the same cover
page that I use with Mac or Sun and the same destination fax and the same
modem) I have problems with the page size. Here there are the messages in
log file:

Mar 05 16:58:06.31: [24524]: SESSION BEGIN 00000153 349430219306
Mar 05 16:58:06.32: [24524]: SEND FAX: JOB 109 DEST 0219306 COMMID 00000153
Mar 05 16:58:06.32: [24524]: DELAY 2600 ms
Mar 05 16:58:09.91: [24524]: <-- [15:ATE0V1Q0S0=0H0\r]
Mar 05 16:58:10.17: [24524]: --> [14:ATE0V1Q0S0=0H0]
............
Mar 05 16:58:13.57: [24524]: DIAL 0219306
Mar 05 16:58:13.57: [24524]: <-- [13:ATDT0219306@\r]
Mar 05 16:58:32.94: [24524]: --> [5:+FCON]
Mar 05 16:58:36.06: [24524]: --> [138:+FNSF:00 00 11 80 00 8A 49 10 49 4E 46
4F 52 4
D 41 54 49 4B 41 20 44 4F 4E 4F 00 46 00 86 04 30 30 30 30 80 C0 8F 02 01 00
01 01 0
1 01 04 ]
Mar 05 16:58:36.06: [24524]: REMOTE NSF "00 00 11 80 00 8A 49 10 49 4E 46 4F
52 4D 4
1 54 49 4B 41 20 44 4F 4E 4F 00 46 00 86 04 30 30 30 30 80 C0 8F 02 01 00 01
01 01 0
1 04"
Mar 05 16:58:36.18: [24524]: --> [28:+FCSI:"        34 43 219306"]
Mar 05 16:58:36.18: [24524]: REMOTE CSI "34 43 219306"
Mar 05 16:58:36.18: [24524]: --> [21:+FDIS:1,3,0,2,1,2,0,3]
Mar 05 16:58:36.18: [24524]: --> [2:OK]
Mar 05 16:58:36.18: [24524]: REMOTE best rate 9600 bit/s
Mar 05 16:58:36.18: [24524]: REMOTE max page width 1728 pixels in 215 mm
Mar 05 16:58:36.19: [24524]: REMOTE max unlimited page length
Mar 05 16:58:36.19: [24524]: REMOTE best vres 7.7 line/mm
Mar 05 16:58:36.19: [24524]: REMOTE best format 2-D MR
Mar 05 16:58:36.19: [24524]: REMOTE supports T.30 Annex C, half duplex ECM
Mar 05 16:58:36.19: [24524]: REMOTE best 10 ms/scanline
Mar 05 16:58:36.19: [24524]: USE 9600 bit/s
Mar 05 16:58:36.19: [24524]: USE 10 ms/scanline
Mar 05 16:58:36.19: [24524]: SEND file "docq/doc109.cover;00"
Mar 05 16:58:36.19: [24524]: Client does not support document page width,
max remote page width 1728 pixels, image width 1734 pixels
Mar 05 16:58:36.19: [24524]: <-- [5:ATH0\r]
Mar 05 16:58:37.81: [24524]: --> [7:+FHNG:2]
Mar 05 16:58:37.81: [24524]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Mar 05 16:58:38.47: [24524]: --> [2:OK]
Mar 05 16:58:38.47: [24524]: SESSION END


Could someone tell me what would I do to solve this problem?

Thanks in advance.
Saludos,
                M.A.

 ---------------------------------------------------------------------------
    Miguel Angel Martinez Ezquerro       |     Universidad del Pais Vasco
    SAID/CIDIR Guipuzcoa (UPV/EHU)       |     E-mail: scsmaezm@sc.ehu.es
    P.M Lardizabal,1 (Edif F.Informatica)|     Tel...: +34 43 448005
    20009 San Sebastian (SPAIN )         |     Fax...: +34 43 219306
 ---------------------------------------------------------------------------




Project hosted by iFAX Solutions