flexfax: Hylafax Problem with Sending Message

[Ray Curtis <ray@clark.net>]

I have installed Hylafax-4.0.8 on a RedHat-5.0 Linux system, and all
seems to check out using the troubleshooting section. I have these
running:

/usr/sbin/faxq 
/usr/sbin/faxgetty /dev/modem 

I am using Tkhylafax as the front-end and this also seems to work.

Now my problem, when I send a fax it seems to send a file to
/var/spool/fax/sendq, but I don't ever see the actual fax file show
up in outgoing, and it never gets sent.
There doesn't appear to be any errors when I check /var/log/messages 
file. It says it sent it, but if I do a 'faxq' it says no entry's.

This is what I see in /var/log/messages:
Feb 14 00:48:22 picard FaxQueuer[334]: HylaFAX (tm) Version 4.0pl1
Feb 14 00:48:22 picard FaxQueuer[334]: Copyright (c) 1990-1996 Sam Leffler
Feb 14 00:48:22 picard FaxQueuer[334]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Feb 14 00:48:26 picard FaxGetty[394]: OPEN /dev/modem
Feb 14 00:48:32 picard FaxGetty[394]: MODEM USROBOTICS SPORTSTER 28800 V.34 FAX Product type           US/Canada External Options                V32bis,V.FC,V.34 Fax Options            Class 1/Class 2.0 Clock Freq             20.16Mhz Eprom                  256k Ram                    32k/Supervisor date        04/18/95 DSP date               03/31/95 Supervisor rev         6.0.5 DSP rev                1.0.9
Feb 14 00:50:14 picard FaxQueuer[334]: SUBMIT JOB 2

Then when I do a 'faxq' I see:
no jobs.

Thanks for any info or stuff to read, I now have installed Hylafax a least
three times thinking I made a mistake so I must be doing something
really dumb here.

Sorry this is so long, but I am really frustrated now,

-- 
Curtis Consulting
mailto:ray@clark.net
http://www.clark.net/pub/ray
====================
The man who understands one woman is qualified to understand pretty well
everything.
		-- Yeats