HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: PostScript formatter not found...



I believe I had a similar problem, which turned out to be that my build and
install of Hylafax had failed to create the link from $FAXPATH/bin/ps2fax
(faxpath in my case being /var/spool/fax/) to the ps2fax.gs file (even though
the installer said it was creating the link)..  Once I created the link it
worked.

Hugh


On 12-Dec-97 Juana M. Bauza wrote:
>
>We are using Hylafax-v4.0pl1, Ghostscript 4.03, gcc 2.7.2.3 on a 
>586 Compaq/Solaris 2.5.1 and a ZyXel 1496E modem.
>
>A   sendfax -d 07985 /tmp/jerry  command is sending this mail:
>
>>From fax Fri Dec 12 14:02:51 1997
>Message-Id: <m0xgaMM-000K2AC@psflsq.ao.uscourts.gov>
>Date: Fri, 12 Dec 97 14:02 EST
>From: fax (Facsimile Agent)
>To: root@psflsq
>Subject: facsimile job 10 to 07985 failed
>Content-Length: 1213
>
>Your facsimile job to 07985 was not sent because
>the document conversion script was not found.  <<<<<<<<<-----  :-(
>
>    ---- Unsent job status ----
>
>   Destination: 07985
>         JobID: 10
>       GroupID: 10
>        Sender: Super-User
>      Mailaddr: root@psflsq
>Submitted From: localhost
>    Page Width: 215 (mm)
>   Page Length: 279 (mm)
>    Resolution: 98 (lpi)
>        Status: Can't find initialization file gs_init.ps.<<--   :-(
>cat: write error: Broken pipe
>
>       Dialogs: 0 (exchanges with remote device)
>         Dials: 0 (consecutive failed calls to destination)
>         Calls: 0 (total phone calls placed)
>         Pages: 0 (pages transmitted)
>      TotPages: 0 (total pages to transmit)
>      Attempts: 0 (attempts to send current page)
>        Dirnum: 0 (directory of next page to send)
>
>    ---- Documents submitted for transmission ----
>
>The following documents were submitted for transmission and are
>available on the server for reuse until they are automatically
>purged when this job is removed.  Documents may also be manually
>removed using the faxrm command; consult faxrm(1) for information.
>
>Filename                 Size Type
>docq/doc10.cover        10893 PostScript cover page
>docq/doc18.ps.10         6011 PostScript
>
>
>I have been looking for documentation on this, but I have not been able 
>to find it. Except to make COMPILE_INITS=1 to compile the *.ps files 
>into the executable, but this did not help either.
>
>What do I need to do with the gi_init.ps file so this work? or where can 
>I read info about this???
>
>Thanks in advance,
>
>Juana
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com

----------------------------------
Hugh Caley, System Administrator
Babcock & Brown, San Francisco
E-Mail: Hugh Caley <hughc@babcockbrown.com> 
Phone 415-512-1515 x694
Date: 12-Dec-97 | Time: 12-Dec-9




Project hosted by iFAX Solutions