 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: Limiting inbound fax speed
- To: Jason Lindquist <linky@see.figure1.net>, flexfax@sgi.com
- Subject: Re: flexfax: Limiting inbound fax speed
- From: Karl Feichtinger <feichtinger@comconnect.com>
- Cc: flexfax@sgi.com
- Date: Wed, 03 Dec 1997 11:17:41 +0100
Hi, Try this in your config.<device> file: Class2DCCQueryCmd: "!(0,1),(0-3),(0-2),(0-2),(0,1),0,0,(0-7)" You should check the original response to the AT+FDCC=? command, and then replace the second filed. In the above case, (0-3) limits the speed to 9600. Karl At 20:47 02.12.1997 -0600, Jason Lindquist wrote: >Has anyone had any luck limiting the speed of received faxes?
- Prev by Date: resending failed faxes
- Next by Date: T.30 errors on answer and - RE: hylafax 4.0pl1 can't send fax to certain fax machines
- Prev by thread: Limiting inbound fax speed
- Next by thread: resending failed faxes
- Index(es):
Project hosted by iFAX Solutions