Re: flexfax: HylaFAX -vs- Boca

[Matthias.Apitz@SOFTCON.de]

thoth@cairo.purplefrog.com wrote:
    
    
      I'm trying to get HylaFAX to send pages (not fax pages, alphanumeric
    beeper pages).  However, the faxq process is smoking crack and giving me
    
    
    Nov  2 18:13:03 cairo PageSend[15600]: PAGE FAILED: Unknown problem (check modem power)
    
    However, Everything seems to go smoothly up to the point where HylaFAX
    loses its mind.
    
    Nov 02 18:08:11.76: [15585]: SESSION BEGIN 00000007 13524120001
    Nov 02 18:08:11.78: [15585]: SEND PAGE: JOB 3 DEST 412-0001 COMMID 00000007
    Nov 02 18:08:11.78: [15585]: DELAY 2600 ms
    Nov 02 18:08:14.40: [15585]: <-- [17:ATE0V1Q0X3S0=0H0\r]
    Nov 02 18:08:14.54: [15585]: --> [16:ATE0V1Q0X3S0=0H0]
    Nov 02 18:08:14.54: [15585]: --> [2:OK]
    Nov 02 18:08:14.54: [15585]: <-- [20:ATS8=2S7=60&K&D3&C1\r]
    Nov 02 18:08:14.69: [15585]: --> [2:OK]
    Nov 02 18:08:14.69: [15585]: <-- [7:ATL1M1\r]
    Nov 02 18:08:14.83: [15585]: --> [2:OK]
    Nov 02 18:08:14.84: [15585]: <-- [12:AT+FCLASS=0\r]
    Nov 02 18:08:15.08: [15585]: --> [2:OK]
    Nov 02 18:08:15.08: [15585]: DIAL 4120001
    Nov 02 18:08:15.08: [15585]: <-- [12:ATDT4120001\r]
    Nov 02 18:08:30.89: [15585]: --> [12:CARRIER 1200]
    Nov 02 18:08:30.91: [15585]: PAGE FAILED: Unknown problem (check modem power)
    Nov 02 18:08:30.92: [15585]: <-- [5:ATH0\r]
    Nov 02 18:08:32.05: [15585]: --> [10:NO CARRIER]
    Nov 02 18:08:32.05: [15585]: MODEM No carrier
    Nov 02 18:08:32.06: [15585]: SESSION END
    
    
      I tried typing all that junk into Seyon and after dialing I get
    this:
    
    CARRIER 1200
    
    PROTOCOL: LAP-M
    
    COMPRESSION: V.42BIS
    
    CONNECT 9600/ARQ
    
    
       Why can't HylaFAX wait for the CONNECT string?  Mail clues to
    thoth@purplefrog.com.

Check ClassModem::isNoise() in faxd/ClassModem.c++ to see how
to ignore this noise of the modem;

	matthias