HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: MultiTech MT2834ZDXV recommendation?



I do send 2000+ a day.  Our record day is 4041 in 24 hours on 7 modems.  All the
faxes are 1 to 2 pages, no cover sheets and all are US (local) numbers.

Here is my config file for one of the modems:  (The FAXnumber and LocalId are 
commented out :)


Patrick
_________________

CountryCode:            1
AreaCode:               703
FAXNumber:              +xxxxx
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        "etc/dialrules"
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0660
RingsBeforeAnswer:      0 
SpeakerVolume:          off
GettyArgs:              "std.%s"
LocalIdentifier:        "xxxx"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           25
# 
# 
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              38400           # lock rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence
#
Class2RecvDataTrigger:  "\022"          # character sent to modem to start recv


On 22-Oct-97 Prof. Julio C. Spinelli wrote:
>Dear Patrick,
>
>Could you please provide me with the config file that you are using. I
>would like to try the Multitech modem. Do you really send 2000 faxes per
>day average? Whow! Are they all to the USA or international?
>
>Thanks very much for this help,
>
>Modem vendors will learn to market products that really work thaks to the
>exchange of info that you are doing. Thanks again,
>
>Julio
>
>On Wed, 22 Oct 1997, Patrick Gardella wrote:
>
>> I am using 8 MT2834ZDX modems are they have not given me a problem yet!  What
>> is the "v" mean?  It this the 28.8 -33.6 update?
>> 
>> Been running 24x7 for 3 months at an average of 2000 faxes outgoing. (I don't
>> allow any incoming.)
>> 
>> Patrick
>> 
>> On 21-Oct-97 Larry Pyeatt wrote:
>> >Hello,
>> >  I have given up on my USR Sportster and am looking for a modem that
>> >works.
>> >Has anyone used the MT2834ZDXV with hylafax?  If so, does it work well?
>> >
>> >Thanks.
>> >
>> >--
>> >Larry D. Pyeatt                     All standard disclaimers apply.
>> >pyeatt@cs.colostate.edu             Void where prohibited.
>> >http://www.cs.colostate.edu/~pyeatt
>> 




Project hosted by iFAX Solutions