HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Modem not answering when faxgetty running



On Thu, 16 Oct 1997, Michael Woodward wrote:

> I've just set up v4.0p11 on a SCO 5.0.0 system.  I have one modem
> connected to use for outgoing(only) faxes and incoming/outgoing data
> calls.
>
> Outgoing faxes work fine, but I cannot dial in (data only).
>
> It seems that while faxgetty is running, autoanswer on the modem is off
> and  the call does not get answered.

faxgetty(1m) actually monitors the RING responses generated by the modem
on an incoming call before picking up the line; ie the modem's autoanswer
*SHOULD* be off.

To enable incoming calls, check out `config.tty1A' for RingsBeforeAnswer:
and set this to a number > 0. Also make sure adaptive answer has been
enabled by use of the ModemSetupAACmd: parameter.

Additionally, for SCO 5.0.0, you should have

    GettyArgs: "-h -t60 %l o",

assuming you're running

    ModemRate: 38400

Cheers.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250




Project hosted by iFAX Solutions