flexfax: Problems receiving faxes with USR Sportser

[Gregor Longariva <Gregor.Longariva@informatik.uni-erlangen.de>]

Hi!

Sometimes I have problems to receive faxes with my USR Sportser
33.6 voice, running on a Linux server.
My Problem is, that the modem (or Hylafax?) refuses faxes which
are not received 100% correctly.

Can anybody help me?

Thanx!

Here's the log:

----------------------------------------------------------------

An attempt to receive facsimile on fax failed because:

    T.30 T2 timeout, expected page not received

    ---- Transcript of session follows ----

Sep 30 10:24:28.86: [  227]: SESSION BEGIN 00000257 499131640572
Sep 30 10:24:29.02: [  227]: <-- [4:ATA\r]
Sep 30 10:24:31.37: [  227]: --> [3:FAX]
Sep 30 10:24:31.45: [  227]: ANSWER: FAX CONNECTION
Sep 30 10:24:31.50: [  227]: RECV FAX: begin
Sep 30 10:24:33.93: [  227]: --> [7:CONNECT]
Sep 30 10:24:35.32: [  227]: --> [2:OK]
Sep 30 10:24:35.32: [  227]: <-- [9:AT+FRH=3\r]
Sep 30 10:24:38.42: [  227]: --> [0:]
Sep 30 10:24:38.59: [  227]: MODEM <Empty line>
Sep 30 10:24:38.60: [  227]: --> [2:OK]
Sep 30 10:24:38.60: [  227]: DELAY 1500 ms
Sep 30 10:24:40.11: [  227]: <-- [9:AT+FTH=3\r]
Sep 30 10:24:40.14: [  227]: --> [7:CONNECT]
Sep 30 10:24:40.16: [  227]: --> [7:CONNECT]
Sep 30 10:24:42.23: [  227]: --> [2:OK]
Sep 30 10:24:42.23: [  227]: <-- [9:AT+FRH=3\r]
Sep 30 10:24:42.69: [  227]: --> [7:CONNECT]
Sep 30 10:24:44.14: [  227]: --> [2:OK]
Sep 30 10:24:44.14: [  227]: REMOTE TSI "+49 9132 40599"
Sep 30 10:24:44.14: [  227]: <-- [9:AT+FRH=3\r]
Sep 30 10:24:44.15: [  227]: --> [7:CONNECT]
Sep 30 10:24:44.48: [  227]: --> [2:OK]
Sep 30 10:24:44.48: [  227]: REMOTE wants 9600 bit/s
Sep 30 10:24:44.48: [  227]: REMOTE wants page width 1728 pixels in 215 mm
Sep 30 10:24:44.48: [  227]: REMOTE wants unlimited page length
Sep 30 10:24:44.48: [  227]: REMOTE wants 3.85 line/mm
Sep 30 10:24:44.48: [  227]: REMOTE wants 2-D MR
Sep 30 10:24:44.48: [  227]: RECV training at v.29 9600 bit/s
Sep 30 10:24:44.48: [  227]: <-- [10:AT+FRM=96\r]
Sep 30 10:24:44.82: [  227]: --> [7:CONNECT]
Sep 30 10:24:46.50: [  227]: RECV: TCF 2011 bytes, 5% non-zero, 1900
zero-run
Sep 30 10:24:46.50: [  227]: --> [10:NO CARRIER]
Sep 30 10:24:46.50: [  227]: DELAY 75 ms
Sep 30 10:24:46.59: [  227]: <-- [9:AT+FTH=3\r]
Sep 30 10:24:46.78: [  227]: --> [7:CONNECT]
Sep 30 10:24:47.96: [  227]: --> [2:OK]
Sep 30 10:24:47.96: [  227]: TRAINING succeeded
Sep 30 10:24:47.96: [  227]: <-- [10:AT+FRM=96\r]
Sep 30 10:24:48.51: [  227]: --> [7:CONNECT]
Sep 30 10:24:48.51: [  227]: RECV: begin page
Sep 30 10:26:29.33: [  227]: RECV: Missing EOL after 5 seconds
Sep 30 10:26:29.71: [  227]: RECV: REJECT page quality, 93% good lines (95%
required)
Sep 30 10:26:29.85: [  227]: RECV: end page
Sep 30 10:26:31.88: [  227]: MODEM <Timeout>
Sep 30 10:26:32.88: [  227]: RECV FAX (00000257): recvq/fax00111.tif from
+49 9132 40599, route to <unspecified>, 0 pages in 2:01
Sep 30 10:26:33.71: [  227]: RECV FAX: T.30 T2 timeout, expected page not
received
Sep 30 10:26:33.80: [  227]: <-- [9:AT+FTH=3\r]
Sep 30 10:26:34.01: [  227]: --> [7:CONNECT]
Sep 30 10:26:35.19: [  227]: --> [2:OK]
Sep 30 10:26:35.73: [  227]: RECV FAX (00000257): session with +49 9132
40599 terminated abnormally: T.30 T2 timeout, expected page not received
Sep 30 10:26:35.82: [  227]: RECV FAX: bin/faxrcvd "recvq/fax00111.tif"
"fax" "00000257" "T.30 T2 timeout, expected page not received"

Liebe Gruesse

     Gregor
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Gregor Longariva <grlongar@cip.informatik.uni-erlangen.de>