HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problems with FreeBSD 2.2.1 and Hylafax



-----BEGIN PGP SIGNED MESSAGE-----

On Tue, 26 Aug 1997, Willem Jan Withagen wrote:

> Well that the point where I'm at, at the moment.
> 
> My old situation:
> 	Running FreeBSD 2.1.7 on a lowly 486
> 	with nothing fancy,
> 	Fax: HylaFax v3.?? with a basic rockwell 28k8 modem
> 
> 	This configuration has worked in various modes for more than a year.
> 
> Until I upgraded to:
> 	FreeBSD 2.2.1

Umm: Don't the 28.8 and 33.6 modems generally work much better in
Class 1?  Many don't work in Class 2 *at all*.  I would definitely
turn the SpeakerVolume to "low" while debugging, as well.

> ModemSetupAACmd:	AT+FAA=1	# enable in current class

And many brands of modem require a bit extra here, since for the old
Rockwell chipset (and maybe some more modern modems), auto-adapt only
works in Class 0 operation. So you might try this instead:

	ModemSetupAACmd:	AT+FCLASS=0+FAA=1	# enable in current class

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNARDDz/+ItycgIJRAQHz8wP/fce8Amq9Aup/VmMnCVolK0um7+EqaK95
dLbyAFwESvxNRA+Y2bYoMceP87PuoMkGyf2gUC5GN6TH90Yf/l36z9e3+MHx0X5T
yfiTpTO9AM/5g0jbmOHp8CiH6ij4mky/XthnvVrYXbbnEhV7u/v/DW6fFF4MtNX+
7v2EcvGiZT0=
=gSxL
-----END PGP SIGNATURE-----




Project hosted by iFAX Solutions